Currently lastbgsave_status is used in bgsave or disk-replication,
and the target is the disk. In #60, we update it when transfer error,
i think it is mainly used in tests, so we can use log to replace it.
It changes lastbgsave_status to err in this case, but it is strange
that it does not set ok or err in the above if and the following else.
Also noted this will affect stop-writes-on-bgsave-error.
Signed-off-by: Binbin <binloveplay1314@qq.com>
I think we should first check if the server is currently enabled in
cluster mode or if it has modules loaded prior to the throttled cron run
(`run_with_period`) condition.
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
Added an assertion to avoid incorrect usage of the network bytes out for
replication code flow in slot stats computation.
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
This PR adjusts the logging conditions of clusterLogCantFailover
in this two ways.
1. For the same cant_failover_reason, we will print the log once
in CLUSTER_CANT_FAILOVER_RELOG_PERIOD, but its value is 10s, which
is a bit long, shorten it to 1s, so we can better track its state.
We get to see the system making progress by watching the message.
Using 1s also covers pretty much all cases as i don't see a reason
for using a <1s node timeout, test or prod.
2. We will not print logs before the nolog_fail_time, its value
is cluster-node-timeout+5000. This may casue us to lose some logs,
for example, if cluster-node-timeout is small, auth_timeout will
be 2000, and auth_retry_time will be 4000. In this case, we will
lose all the reasons during the election if the failover is timedout.
So remove the nolog_fail_time logic, since we still do have the
CLUSTER_CANT_FAILOVER_RELOG_PERIOD logic, we won't print too many
logs.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Few CI improvements witch will reduce occupation CI queue and eliminate
stale runs.
1. Kill CI jobs on PRs once PR branch gets a new push. This will prevent
situation happened today - a huge job triggered twice in less than an
hour and occupied all **org** (for all repositories) runners queue for
the rest of the day (see pic). This completely blocked valkey-glide
team.
2. Distribute nightly croned jobs on time to prevent them running
together. Keep in mind, cron's TZ is UTC, so midnight tasks incur
developers located in other timezones.
This must be backported to all release branches (`valkey-x.y` and `x.y`)
---------
Signed-off-by: Yury-Fridlyand <yury.fridlyand@improving.com>
This example of a minimal user account in your Valkey server
for Sentinel is incorrect. If you add this ACL as-is to your
valkey users.acl, valkey will add resetchannels -@all before
the +client which prevents sentinel from publishing messages
to the __sentinel__:hello pubsub for sentinel discovery.
Fix#744.
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
We have a number of test failures in the empty shard migration which
seem to be related to race conditions in the failover, but could be more
pervasive. For now disable the tests to prevent so many false negative
test failures.
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Release candidates have a version that is lower than 8.0.0 to allow for
8.0.0 to have 0x080000 as a release number. However, we did an explicit
check to make sure a version was 8.0 or greater to validate a replica
supports a feature. Now we are using the highest patch version of latest
minor to do the comparison to accommodate future versions.
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Fix bug in writeToClient
In https://github.com/valkey-io/valkey/pull/758, a major refactor was
done to `networking.c`.
As part of this refactor, a new bug was introduced: we don't advance the
`c->buf` pointer in repeated writes.
This bug should be very unlikely to manifest, as it requires the
client's TCP buffer to be filled in the first try and then released
immediately after in the second try.
Despite all my efforts to reproduce this scenario, I was unable to do
so.
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
I think it is a good idea to mention this.
The Cluster config file is written relative this directory, if the
'cluster-config-file' configuration directive is a relative path.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Fixes test failure
(https://github.com/valkey-io/valkey/actions/runs/10146979329/job/28056316421?pr=837)
on 32 bit system for slot stats metric underflow on the following
condition:
```
server.cluster->slot_stats[c->slot].network_bytes_out += (len * listLength(server.replicas));
```
* Here listLength accesses `len` which is of `unsigned long` type and
multiplied with `len` (which could be negative). This is a risky
operation and behaves differently based on the architecture.
```
clusterSlotStatsAddNetworkBytesOutForReplication(-sdslen(selectcmd->ptr));
```
* `sdslen` method returns `size_t`. applying `-` operation to decrement
network bytes out is also incorrect.
This change adds assertion on `len` being negative and handles the
wrapping of overall value.
---------
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
Update the dual channel-replication tests to wait for the pause to begin
before attempting to unpause.
---------
Signed-off-by: naglera <anagler123@gmail.com>
If we do `config set appendonly yes` and `config set appendonly no`
in a multi, there are some unexpected behavior.
When doing appendonly yes, we will schedule a AOFRW, and when we
are doding appendonly no, we will call stopAppendOnly to stop it.
In stopAppendOnly, the aof_fd is -1 since the aof is not start yet
and the fsync and close will take the -1 and call it, so they will
all fail with EBADF. And stopAppendOnly will emit a server log, the
close(-1) should be no problem but it is still an undefined behavior.
This PR also adds a log `Background append only file rewriting
scheduled.` to bgrewriteaofCommand when it was scheduled.
And adds a log in stopAppendOnly when a scheduled AOF is canceled,
it will print `AOF was disabled but there is a scheduled AOF background, cancel it.`
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Adds two new metrics for per-slot statistics, network-bytes-in and
network-bytes-out. The network bytes are inclusive of replication bytes
but exclude other types of network traffic such as clusterbus traffic.
#### network-bytes-in
The metric tracks network ingress bytes under per-slot context, by
reverse calculation of `c->argv_len_sum` and `c->argc`, stored under a
newly introduced field `c->net_input_bytes_curr_cmd`.
#### network-bytes-out
The metric tracks network egress bytes under per-slot context, by
hooking onto COB buffer mutations.
#### sample response
Both metrics are reported under the `CLUSTER SLOT-STATS` command.
```
127.0.0.1:6379> cluster slot-stats slotsrange 0 0
1) 1) (integer) 0
2) 1) "key-count"
2) (integer) 0
3) "cpu-usec"
4) (integer) 0
5) "network-bytes-in"
6) (integer) 0
7) "network-bytes-out"
8) (integer) 0
```
---------
Signed-off-by: Kyle Kim <kimkyle@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Adds light-weight cluster bus header for pubsub message. Closes#557.
This also supports sending to and receiving non-light messages from
older versions of the engine.
The light-weight cluster bus message supports multiple pubsub messages
(payloads) for one pubsub channel. Receiving messages with multiple
payloads is supported but we're not yet sending such multi-payload
messages to other nodes.
---------
Signed-off-by: Roshan Khatri <rvkhatri@amazon.com>
Introduce several improvements to improve the stability of dual-channel
replication and fix compatibility issues.
1. Make dual-channel-replication tests more reliable: use pause instead
of forced sleep.
2. Fix race conditions when freeing RDB client.
3. Check if sync was stopped during local buffer streaming.
4. Fix $ENDOFFSET reply format to work on 32-bit machines too.
---------
Signed-off-by: naglera <anagler123@gmail.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
During the ZADD operation, a conversion from listpack to skiplist might
be necessary for the sorted set. Currently, the function
zsetTypeMaybeConvert only examines the number of elements but does not
check the Max size of the elements. It is advisable to include a check
for value_len_hint for a more robust conversion check mechanism.
---------
Signed-off-by: RayCao <zisong.cw@alibaba-inc.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Currently, when running tests with IO threads, we set the
`events-per-io-thread` config to 0. This activated IO threads 100% of
the time, regardless of the number of IO events.
This is causing issues with tests running multiple server instances, as
it drained machine CPU resources. As a result, tests could have very
long runtimes, especially on limited instances.
For example, in
https://github.com/valkey-io/valkey/actions/runs/10066315827/job/27827426986?pr=804,
the `Cluster consistency during live resharding` test ran for 1 hour and
41 minutes.
This PR addresses the issue by:
1. Deactivating IO threads when there are no IO events
2. Continuing to offload all IO events to IO threads
Tested on 16 cores instance, after implementing these changes, the
runtime for the `Cluster consistency during live resharding` test
dropped from 7 minutes an 14 seconds to 3 minutes and 28 seconds.
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
In some cases, like read more than write scenario, the replication
offset of the replicas are the same. When the primary fails, the
replicas have the same rankings (rank == 0). They issue the election
at the same time (although we have a random 500), the simultaneous
elections may lead to the failure of the election due to quorum.
In clusterGetReplicaRank, when we calculates the rank, if the offsets
are the same, the one with the smaller node name will have a better
rank to avoid this situation.
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
The metric tracks cpu time in micro-seconds, sharing the same value as
`INFO COMMANDSTATS`, aggregated under per-slot context.
---------
Signed-off-by: Kyle Kim <kimkyle@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
This PR allows running a subset of the daily tests with a PR by
attaching the `run-extra-tests` flag. This is done by conditionally
running the daily tests when the label is attached. (I will do that for
this PR to demonstrate).
One downside of this PR is that a lot of tests will forever show-up as
"skipped" for most PRs, as long as that doesn't bother us it should be
OK. Skipped tests don't take up any of our runner compute.
Another note, if the label isn't attached on the first commit, the
submitter will need to push something to get the tests to run again.
There is a way to make it kick off tests during a label, but that added
a bunch more complexity so just wanted to start with this.
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
When executing the script, the client passed in is a fake
client, and its woff is always 0.
This results in woff always being 0 when executing wait/waitaof
in the script, and the command returns a wrong number.
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
We will not reset failover_auth_time after setting it, this is used
to check auth_timeout and auth_retry_time, but we should at least
reset it after a successful failover.
Let's assume the following scenario:
1. Two replicas initiate an election.
2. Replica 1 is elected as the primary node, and replica 2 does not have
enough votes.
3. Replica 1 is down, ie the new primary node down again in a short
time.
4. Replica 2 know that the new primary node is down and wants to
initiate
a failover, but because the failover_auth_time of the previous round
has not been reset, it needs to wait for it to time out and then wait
for the next retry time, which will take cluster-node-timeout * 4 times,
this adds a lot of delay.
There is another problem. Like we will set additional random time for
failover_auth_time, such as random 500ms and replicas ranking 1s. If
replica 2 receives PONG from the new primary node before sending the
FAILOVER_AUTH_REQUEST, that is, before the failover_auth_time, it will
change itself to a replica. If the new primary node goes down again at
this time, replica 2 will use the previous failover_auth_time to
initiate
an election instead of going through the logic of random 500ms and
replicas ranking 1s again, which may lead to unexpected consequences
(for example, a low-ranking replica initiates an election and becomes
the new primary node).
That is, we need to reset failover_auth_time at the appropriate time.
When the replica switches to a new primary, we reset it, because the
existing failover_auth_time is already out of date in this case.
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
Fix#784
Prior to the change, `CLUSTER SHARDS` command processing might pick a
failed primary node which won't have the slot coverage information and
the slots `output` in turn would be empty. This change finds an
appropriate node which has the slot coverage information served by a
given shard and correctly displays it as part of `CLUSTER SHARDS`
output.
Before:
```
1) 1) "slots"
2) (empty array)
3) "nodes"
4) 1) 1) "id"
2) "2936f22a490095a0a851b7956b0a88f2b67a5d44"
...
9) "role"
10) "master"
...
13) "health"
14) "fail"
```
After:
```
1) 1) "slots"
2) 1) 0
2) 5461
3) "nodes"
4) 1) 1) "id"
2) "2936f22a490095a0a851b7956b0a88f2b67a5d44"
...
9) "role"
10) "master"
...
13) "health"
14) "fail"
```
---------
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
### IO-Threads Work Offloading
This PR is the 2nd of 3 PRs intended to achieve the goal of 1M requests
per second.
(1st PR: https://github.com/valkey-io/valkey/pull/758)
This PR offloads additional work to the I/O threads, beyond the current
read-parse/write operations, to better utilize the I/O threads and
reduce the load on the main thread.
It contains the following 3 commits:
### Poll Offload
Currently, the main thread is responsible for executing the poll-wait
system call, while the IO threads wait for tasks from the main thread.
The poll-wait operation is expensive and can consume up to 30% of the
main thread's time. We could have let the IO threads do the poll-wait by
themselves, with each thread listening to some of the clients and
notifying the main thread when a client's command is ready to execute.
However, the current approach, where the main thread listens for events
from the network, has several benefits. The main thread remains in
charge, allowing it to know the state of each client
(idle/read/write/close) at any given time. Additionally, it makes the
threads flexible, enabling us to drain an IO thread's job queue and stop
a thread when the load is light without modifying the event loop and
moving its clients to a different IO thread. Furthermore, with this
approach, the IO threads don't need to wait for both messages from the
network and from the main thread instead, the threads wait only for
tasks from the main thread.
To enjoy the benefits of both the main thread remaining in charge and
the poll being offloaded, we propose offloading the poll-wait as a
single-time, non-blocking job to one of the IO threads. The IO thread
will perform a poll-wait non-blocking call while the main thread
processes the client commands. Later, in `aeProcessEvents`, instead of
sleeping on the poll, we check for the IO thread's poll-wait results.
The poll-wait will be offloaded in `beforeSleep` only when there are
ready events for the main thread to process. If no events are pending,
the main thread will revert to the current behavior and sleep on the
poll by itself.
**Implementation Details**
A new call back `custompoll` was added to the `aeEventLoop` when not set
to `NULL` the ae will call the `custompoll` callback instead of the
`aeApiPoll`.
When the poll is offloaded we will set the `custompoll` to
`getIOThreadPollResults` and send a poll-job to the thread. the thread
will take a mutex, call a non-blocking (with timeout 0) to `aePoll`
which will populate the fired events array. the IO thread will set the
`server.io_fired_events` to the number of the returning `numevents`,
later the main-thread in `custompoll` will return the
`server.io_fired_events` and will set the `customPoll` back to `NULL`.
To ensure thread safety when accessing server.el, all functions that
modify the eventloop events were wrapped with a mutex to ensure mutual
exclusion when modifying the events.
### Command Lookup Offload
As the IO thread parses the command from the client's Querybuf, it can
perform a command lookup in the commands dictionary, which can consume
up to ~5% of the main-thread runtime.
**Implementation details**
The IO thread will store the looked-up command in the client's new field
`io_parsed_cmd` field. We can't use `c->cmd` for that since we use
`c->cmd `to check if a command was reprocessed or not.
To ensure thread safety when accessing the command dictionary, we make
sure the main thread isn't changing the dictionary while IO threads are
accessing it. This is accomplished by introducing a new flag called
`no_incremental_rehash` for the `dictType` commands. When performing
`dictResize`, we will rehash the entire dictionary in place rather than
deferring the process.
### Free Offload
Since the command arguments are allocated by the I/O thread, it would be
beneficial if they were also freed by the same thread. If the main
thread frees objects allocated by the I/O thread, two issues arise:
1. During the freeing process, the main thread needs to access the SDS
pointed to by the object to get its length.
2. With Jemalloc, each thread manages thread local pool (`tcache`) of
buffers for quick reallocation without accessing the arena. If the main
thread constantly frees objects allocated by other threads, those
threads will have to frequently access the shared arena to obtain new
memory allocations
**Implementation Details**
When freeing the client's argv, we will send the argv array to the
thread that allocated it. The thread will be identified by the client
ID. When freeing an object during `dbOverwrite`, we will offload the
object free as well. We will extend this to offload the free during
`dbDelete` in a future PR, as its effects on defrag/memory evictions
need to be studied.
---------
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
Primary side: Remove read handler upon RDB connection close.
At this stage we do not expect any writed form that connection
so it should be safe to remove the read handler. Otherwise the
read handler will keep printing the `Client closed connection`
logs, see handleReadResult.
Signed-off-by: naglera <anagler123@gmail.com>
server.rdb_child_exit_pipe is init in !dual_channel block,
so the call here would be close(-1) in !dual_channel way.
It will also generate a warning in valgrind:
Warning: invalid file descriptor -1 in syscall close()
Introduced in #60.
Signed-off-by: Binbin <binloveplay1314@qq.com>
After #60, the CI report this warning:
```
rdb.c: In function 'rdbSaveToReplicasSockets':
rdb.c:3661:28: error: 'safe_to_exit_pipe' may be used uninitialized [-Werror=maybe-uninitialized]
3661 | if (!dual_channel) close(safe_to_exit_pipe);
| ^~~~~~~~~~~~~~~~~~~~~~~~
rdb.c:3512:37: note: 'safe_to_exit_pipe' was declared here
3512 | int pipefds[2], rdb_pipe_write, safe_to_exit_pipe;
| ^~~~~~~~~~~~~~~~~
rdb.c:3654:17: error: 'rdb_pipe_write' may be used uninitialized [-Werror=maybe-uninitialized]
3654 | close(rdb_pipe_write); /* close write in parent so that it can detect the close on the child. */
| ^~~~~~~~~~~~~~~~~~~~~
rdb.c:3512:21: note: 'rdb_pipe_write' was declared here
3512 | int pipefds[2], rdb_pipe_write, safe_to_exit_pipe;
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
```
Signed-off-by: Binbin <binloveplay1314@qq.com>
In this PR we introduce the main benefit of dual channel replication by
continuously steaming the COB (client output buffers) in parallel to the
RDB and thus keeping the primary's side COB small AND accelerating the
overall sync process. By streaming the replication data to the replica
during the full sync, we reduce
1. Memory load from the primary's node.
2. CPU load from the primary's main process. [Latest performance
tests](#data)
## Motivation
* Reduce primary memory load. We do that by moving the COB tracking to
the replica side. This also decrease the chance for COB overruns. Note
that primary's input buffer limits at the replica side are less
restricted then primary's COB as the replica plays less critical part in
the replication group. While increasing the primary’s COB may end up
with primary reaching swap and clients suffering, at replica side we’re
more at ease with it. Larger COB means better chance to sync
successfully.
* Reduce primary main process CPU load. By opening a new, dedicated
connection for the RDB transfer, child processes can have direct access
to the new connection. Due to TLS connection restrictions, this was not
possible using one main connection. We eliminate the need for the child
process to use the primary's child-proc -> main-proc pipeline, thus
freeing up the main process to process clients queries.
## Dual Channel Replication high level interface design
- Dual channel replication begins when the replica sends a `REPLCONF
CAPA DUALCHANNEL` to the primary during initial
handshake. This is used to state that the replica is capable of dual
channel sync and that this is the replica's main channel, which is not
used for snapshot transfer.
- When replica lacks sufficient data for PSYNC, the primary will send
`-FULLSYNCNEEDED` response instead
of RDB data. As a next step, the replica creates a new connection
(rdb-channel) and configures it against
the primary with the appropriate capabilities and requirements. The
replica then requests a sync
using the RDB channel.
- Prior to forking, the primary sends the replica the snapshot's end
repl-offset, and attaches the replica
to the replication backlog to keep repl data until the replica requests
psync. The replica uses the main
channel to request a PSYNC starting at the snapshot end offset.
- The primary main threads sends incremental changes via the main
channel, while the bgsave process
sends the RDB directly to the replica via the rdb-channel. As for the
replica, the incremental
changes are stored on a local buffer, while the RDB is loaded into
memory.
- Once the replica completes loading the rdb, it drops the
rdb-connection and streams the accumulated incremental
changes into memory. Repl steady state continues normally.
## New replica state machine
## Data <a name="data"></a>
## Explanation
These graphs demonstrate performance improvements during full sync
sessions using rdb-channel + streaming rdb directly from the background
process to the replica.
First graph- with at most 50 clients and light weight commands, we saw
5%-7.5% improvement in write latency during sync session.
Two graphs below- full sync was tested during heavy read commands from
the primary (such as sdiff, sunion on large sets). In that case, the
child process writes to the replica without sharing CPU with the loaded
main process. As a result, this not only improves client response time,
but may also shorten sync time by about 50%. The shorter sync time
results in less memory being used to store replication diffs (>60% in
some of the tested cases).
## Test setup
Both primary and replica in the performance tests ran on the same
machine. RDB size in all tests is 3.7gb. I generated write load using
valkey-benchmark ` ./valkey-benchmark -r 100000 -n 6000000 lpush my_list
__rand_int__`.
---------
Signed-off-by: naglera <anagler123@gmail.com>
Signed-off-by: naglera <58042354+naglera@users.noreply.github.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Ping Xie <pingxie@outlook.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Fixes a regression introduced in PR #445, which allowed a message from a
replica
to update the slot ownership of its primary. The regression results in a
`replicaof` cycle, causing server crashes due to the cycle detection
assert. The
fix restores the previous behavior where only primary senders can
trigger
`clusterUpdateSlotsConfigWith`.
Additional changes:
* Handling of primaries without slots is obsoleted by new handling of
when a
sender that was a replica announces that it is now a primary.
* Replication loop detection code is unchanged but shifted downwards.
* Some variables are renamed for better readability and some are
introduced to
avoid repeated memcmp() calls.
Fixes#753.
---------
Signed-off-by: Ping Xie <pingxie@google.com>
Update sentinel.conf config parameter,
From:
SENTINEL master-reboot-down-after-period mymaster 0
To:
SENTINEL primary-reboot-down-after-period myprimary 0
But we still keep the backward compatibility, clients could use SENTINEL
master-reboot-down-after-period mymaster 0 OR
SENTINEL primary-reboot-down-after-period myprimary 0
---------
Signed-off-by: hwware <wen.hui.ware@gmail.com>
Adds an option to build RDMA support as a module:
make BUILD_RDMA=module
To start valkey-server with RDMA, use a command line like the following:
./src/valkey-server --loadmodule src/valkey-rdma.so \
port=6379 bind=xx.xx.xx.xx
* Implement server side of connection module only, this means we can
*NOT*
compile RDMA support as built-in.
* Add necessary information in README.md
* Support 'CONFIG SET/GET', for example, 'CONFIG Set rdma.port 6380',
then
check this by 'rdma res show cm_id' and valkey-cli (with RDMA support,
but not implemented in this patch).
* The full listeners show like:
listener0:name=tcp,bind=*,bind=-::*,port=6379
listener1:name=unix,bind=/var/run/valkey.sock
listener2:name=rdma,bind=xx.xx.xx.xx,bind=yy.yy.yy.yy,port=6379
listener3:name=tls,bind=*,bind=-::*,port=16379
Because the lack of RDMA support from TCL, use a simple C program to
test
Valkey Over RDMA (under tests/rdma/). This is a quite raw version with
basic
library dependence: libpthread, libibverbs, librdmacm. Run using the
script:
./runtest-rdma [ OPTIONS ]
To run RDMA in GitHub actions, a kernel module RXE for emulated soft
RDMA, needs
to be installed. The kernel module source code is fetched a repo
containing only
the RXE kernel driver from the Linux kernel, but stored in an separate
repo to
avoid cloning the whole Linux kernel repo.
----
Since 2021/06, I created a
[PR](https://github.com/redis/redis/pull/9161) for *Redis Over RDMA*
proposal. Then I did some work to [fully abstract connection and make
TLS dynamically loadable](https://github.com/redis/redis/pull/9320), a
new connection type could be built into Redis statically, or a separated
shared library(loaded by Redis on startup) since Redis 7.2.0.
Base on the new connection framework, I created a new
[PR](https://github.com/redis/redis/pull/11182), some
guys(@xiezhq-hermann @zhangyiming1201 @JSpewock @uvletter @FujiZ)
noticed, played and tested this PR. However, because of the lack of time
and knowledge from the maintainers, this PR has been pending about 2
years.
Related doc: [Introduce *Valkey Over RDMA*
specification](https://github.com/valkey-io/valkey-doc/pull/123). (same
as Redis, and this should be same)
Changes in this PR:
- implement *Valkey Over RDMA*. (compact the Valkey style)
Finally, if this feature is considered to merge, I volunteer to maintain
it.
---------
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Implementing the change proposed here:
https://github.com/valkey-io/valkey/issues/487
In this PR, we prevent tracking new custom error messages (e.g. LUA) if
the number of error messages (in the errors RAX) is greater than 128.
Instead, we will track any additional custom error prefix in a new
counter: `errorstat_ERRORSTATS_OVERFLOW ` and if any non-custom flagged
errors (e.g. MOVED / CLUSTERDOWN) occur, they will continue to be
tracked as usual.
This will address the issue of spammed error messages / memory usage of
the errors RAX. Additionally, we will not have to execute `CONFIG
RESETSTAT` to restore error stats functionality because normal error
messages continue to be tracked.
Example:
```
# Errorstats
.
.
.
errorstat_127:count=2
errorstat_128:count=2
errorstat_ERR:count=1
errorstat_ERRORSTATS_OVERFLOW:count=2
```
---------
Signed-off-by: Karthik Subbarao <karthikrs2021@gmail.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Allows cluster admins to configure the blacklist TTL as needed to allow
sufficient time for `CLUSTER FORGET` to be executed on every node in the
cluster.
Config name `cluster-blacklist-ttl`; unit seconds; deault 60.
---------
Signed-off-by: Brennan Cathcart <brennancathcart@gmail.com>
Normally we can create a test cluster directly in the directory
using `./utils/create-cluster/create-cluster`, which would keep
the test files under `./` and messed up the git.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Inputing a negative number equivalent to --loop, and inputing a
number greater than or equal to 0 will cause the tests to be run
one more time.
Signed-off-by: Binbin <binloveplay1314@qq.com>
The test fails because, in external, another test may have
enabled appendonly, causing acklocal to return 1.
We can add a CONFIG SET to disable the appendonly, but this
is not safe too unless we use multi. The test does not actually
rely on appendonly, so we can just * it.
Fixes#770.
Signed-off-by: Binbin <binloveplay1314@qq.com>
New configs:
* `cluster-announce-client-ipv4`
* `cluster-announce-client-ipv6`
New module API function:
* `ValkeyModule_GetClusterNodeInfoForClient`, takes a client id and is
otherwise just like its non-ForClient cousin.
If configured, one of these IP addresses are reported to each client in
CLUSTER SLOTS, CLUSTER SHARDS, CLUSTER NODES and redirects, replacing
the IP (`custer-announce-ip` or the auto-detected IP) of each node.
Which one is reported to the client depends on whether the client is
connected over IPv4 or IPv6.
Benefits:
* This allows clients using IPv4 to get the IPv4 addresses of all
cluster nodes and IPv6 clients to get the IPv6 clients.
* This allows the IPs visible to clients to be different to the IPs used
between the cluster nodes due to NAT'ing.
The information is propagated in the cluster bus using new Ping
extensions. (Old nodes without this feature ignore unknown Ping
extensions.)
This adds another dimension to CLUSTER SLOTS reply. It now depends on
the client's use of TLS, the IP address family and RESP version.
Refactoring: The cached connection type definition is moved from
connection.h (it actually has nothing to do with the connection
abstraction) to server.h and is changed to a bitmap, with one bit for
each of TLS, IPv6 and RESP3.
Fixes#337
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
I noticed in #738 that we don't properly check ULong config boundaries
and made the change there. I'm pulling out that particular commit into
this PR since we don't know if we want to merge the configurable cluster
blacklist TTL yet.
---------
Signed-off-by: Brennan Cathcart <brennancathcart@gmail.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
