* Debug Populate: Add checks for count and keysize to avoid crash
* provide getRangeLongFromObjectOrReply and getPositiveLongFromObjectOrReply for range check
* Debug Populate: Add checks for count and keysize to avoid crash
* provide getRangeLongFromObjectOrReply and getPositiveLongFromObjectOrReply for range check
Expose new `loading_rdb_used_mem` showing the used memory of the server
that saved the RDB file we're currently using.
This is useful in diskless replication when the total size of the rdb is
unkown, and can be used as a rought estimation of progres.
Use that new field to calculate the "user friendly"
`loading_loaded_perc` and `loading_eta_seconds`.
Expose `master_sync_total_bytes` and `master_sync_total_bytes` to complement
on the existing `master_sync_total_bytes` (which cannot be used on its own
to calculate progress).
Add "user friendly" field for `master_sync_perc`
Expose new `loading_rdb_used_mem` showing the used memory of the server
that saved the RDB file we're currently using.
This is useful in diskless replication when the total size of the rdb is
unkown, and can be used as a rought estimation of progres.
Use that new field to calculate the "user friendly"
`loading_loaded_perc` and `loading_eta_seconds`.
Expose `master_sync_total_bytes` and `master_sync_total_bytes` to complement
on the existing `master_sync_total_bytes` (which cannot be used on its own
to calculate progress).
Add "user friendly" field for `master_sync_perc`
Perform full reset of all client connection states, is if the client was
disconnected and re-connected. This affects:
* MULTI state
* Watched keys
* MONITOR mode
* Pub/Sub subscription
* ACL/Authenticated state
* Client tracking state
* Cluster read-only/asking state
* RESP version (reset to 2)
* Selected database
* CLIENT REPLY state
The response is +RESET to make it easily distinguishable from other
responses.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Perform full reset of all client connection states, is if the client was
disconnected and re-connected. This affects:
* MULTI state
* Watched keys
* MONITOR mode
* Pub/Sub subscription
* ACL/Authenticated state
* Client tracking state
* Cluster read-only/asking state
* RESP version (reset to 2)
* Selected database
* CLIENT REPLY state
The response is +RESET to make it easily distinguishable from other
responses.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
- rdbSaveSingleModuleAux() used RedisModuleIO's "bytes" field for
tracking written bytes before calling moduleInitIOContext() which sets
"bytes" to zero
- rdbSaveObject() re-initialized RedisModuleIO too late
This return value is not used at the moment since it's only tested
against -1, and the actual byte count isn't used yet.
Co-authored-by: Tomasz Poradowski <tomasz.poradowski@generiscorp.com>
- rdbSaveSingleModuleAux() used RedisModuleIO's "bytes" field for
tracking written bytes before calling moduleInitIOContext() which sets
"bytes" to zero
- rdbSaveObject() re-initialized RedisModuleIO too late
This return value is not used at the moment since it's only tested
against -1, and the actual byte count isn't used yet.
Co-authored-by: Tomasz Poradowski <tomasz.poradowski@generiscorp.com>
This will allow to use: RedisModule_CreateStringPrintf(ctx, "%s %c %s", "string1", 0, "string2");
On large string, the previous code would incrementally retry to double the output buffer.
now it uses the the return value of snprintf and grows to the right size in one step.
and also avoids an excessive strlen in sdscat at the end.
This will allow to use: RedisModule_CreateStringPrintf(ctx, "%s %c %s", "string1", 0, "string2");
On large string, the previous code would incrementally retry to double the output buffer.
now it uses the the return value of snprintf and grows to the right size in one step.
and also avoids an excessive strlen in sdscat at the end.
Make it possible for redis-cli cluster import to work with source and
target that require AUTH.
Adding two different flags --cluster-from-user, --cluster-from-pass
and --cluster-askpass for source node authentication.
Also for target authentication, using existing --user and --pass flag.
Example:
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --pass 1234 --user default --cluster-from-user default --cluster-from-pass 123456
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --askpass --cluster-from-user default --cluster-from-askpass
Make it possible for redis-cli cluster import to work with source and
target that require AUTH.
Adding two different flags --cluster-from-user, --cluster-from-pass
and --cluster-askpass for source node authentication.
Also for target authentication, using existing --user and --pass flag.
Example:
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --pass 1234 --user default --cluster-from-user default --cluster-from-pass 123456
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --askpass --cluster-from-user default --cluster-from-askpass
Few config settings are also reflected by the INFO command.
these are mainly ones that are important for either an instant view of
the server status (to compare a metric to it's limit config),
Important configurations that are necessary in the crash log (which
currently doesn't print the config),
And things that are important for monitoring solutions (such as
Prometheus), which rely on INFO to collect their data.
Add cluster_connections to INFO CLUSTER:
This makes it possible to be combined together with connected_clients
and connected_slaves and be matched against maxclients
Few config settings are also reflected by the INFO command.
these are mainly ones that are important for either an instant view of
the server status (to compare a metric to it's limit config),
Important configurations that are necessary in the crash log (which
currently doesn't print the config),
And things that are important for monitoring solutions (such as
Prometheus), which rely on INFO to collect their data.
Add cluster_connections to INFO CLUSTER:
This makes it possible to be combined together with connected_clients
and connected_slaves and be matched against maxclients
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: e70fbad
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
The reason that we want to get a full crash report on SIGABRT
is that the jmalloc, when detecting a corruption, calls abort().
This will cause the Redis to exist silently without any report
and without any way to analyze what happened.
The reason that we want to get a full crash report on SIGABRT
is that the jmalloc, when detecting a corruption, calls abort().
This will cause the Redis to exist silently without any report
and without any way to analyze what happened.
The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
Useful when you want to know through which bind address the client connected to
the server in case of multiple bind addresses.
- Adding `laddr` field to CLIENT list showing the local (bind) address.
- Adding `LADDR` option to CLIENT KILL to kill all the clients connected
to a specific local address.
- Refactoring to share code.
Useful when you want to know through which bind address the client connected to
the server in case of multiple bind addresses.
- Adding `laddr` field to CLIENT list showing the local (bind) address.
- Adding `LADDR` option to CLIENT KILL to kill all the clients connected
to a specific local address.
- Refactoring to share code.
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
