The key point is how to recover from last AOF write error, for example:
1. start redis with appendonly yes, and append some write commands
2. short write or something else error happen, `server.aof_last_write_status` changed to `C_ERR`, now redis doesn't accept write commands
3. execute `CONFIG SET appendonly no` to avoid the above problem, now redis can accept write commands again
4. disk error resolved, and execute `CONFIG SET appendonly yes` to reopen AOF, but `server.aof_last_write_status` cannot be changed to `C_OK` (if background aof rewrite run less then 1 second, it will free `server.aof_buf` and then serverCron cannot fix `aof_last_write_status`), then redis cannot accept write commands forever.
This PR use a simple way to fix it:
1. just free `server.aof_buf` when stop appendonly to save memory, if error happens in `flushAppendOnlyFile(1)`, the `server.aof_buf` may contains some data which has not be written to aof, I think we can ignore it because we turn off the appendonly.
2. reset fsync status after stop appendonly and call `flushAppendOnlyFile` only when `aof_state` is ON
3. reset `server.last_write_status` when reopen aof to accept write commands
With AOF policy of fsync "always", redis should respect the contract with the user
that on acknowledged write data is already synced on disk.
Redis was already exiting for AOF write error, but don't care about fsync failure.
So to guarantee data safe, redis should exit for fsync error too (when the AOF fsync
policy is 'always').
APIs added for these stream operations: add, delete, iterate and
trim (by ID or maxlength). The functions are prefixed by RM_Stream.
* RM_StreamAdd
* RM_StreamDelete
* RM_StreamIteratorStart
* RM_StreamIteratorStop
* RM_StreamIteratorNextID
* RM_StreamIteratorNextField
* RM_StreamIteratorDelete
* RM_StreamTrimByLength
* RM_StreamTrimByID
The type RedisModuleStreamID is added and functions for converting
from and to RedisModuleString.
* RM_CreateStringFromStreamID
* RM_StringToStreamID
Whenever the stream functions return REDISMODULE_ERR, errno is set to
provide additional error information.
Refactoring: The zset iterator fields in the RedisModuleKey struct
are wrapped in a union, to allow the same space to be used for type-
specific info for streams and allow future use for other key types.
This is both a bugfix and an enhancement.
Internally, Sentinel relies entirely on IP addresses to identify
instances. When configured with a new master, it also requires users to
specify and IP and not hostname.
However, replicas may use the replica-announce-ip configuration to
announce a hostname. When that happens, Sentinel fails to match the
announced hostname with the expected IP and considers that a different
instance, triggering reconfiguration, etc.
Another use case is where TLS is used and clients are expected to match
the hostname to connect to with the certificate's SAN attribute. To
properly implement this configuration, it is necessary for Sentinel to
redirect clients to a hostname rather than an IP address.
The new 'resolve-hostnames' configuration parameter determines if
Sentinel is willing to accept hostnames. It is set by default to no,
which maintains backwards compatibility and avoids unexpected DNS
resolution delays on systems with DNS configuration issues.
Internally, Sentinel continues to identify instances by their resolved
IP address and will also report the IP by default. The new
'announce-hostnames' parameter determines if Sentinel should prefer to
announce a hostname, when available, rather than an IP address. This
applies to addresses returned to clients, as well as their
representation in the configuration file, REPLICAOF configuration
commands, etc.
This commit also introduces SENTINEL CONFIG GET and SENTINEL CONFIG SET
which can be used to introspect or configure global Sentinel
configuration that was previously was only possible by directly
accessing the configuration file and possibly restarting the instance.
Co-authored-by: myl1024 <myl92916@qq.com>
Co-authored-by: sundb <sundbcn@gmail.com>
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
At least in one case the arm64 cow kernel bug test triggers an assert, which is a problem because it cannot be ignored like cases where the bug is found.
On older systems (Linux <4.5) madvise fails because MADV_FREE is not supported. We treat these failures as an indication the system is not affected.
Fixes#8351, #8406
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
In activeDefragSdsListAndDict when dict_val_type is DEFRAG_SDS_DICT_VAL_VOID_PTR, it should update de->v.val not ln->value.
Because this code path will never be executed, so this bug never happened.
In some scenarios, such as remote backup, we only want to get remote
redis server db snapshot. Currently, redis-cli acts as a replica and
sends SYNC to redis, but redis still accumulates replication buffer
in the replica client output buffer, that may result in using vast
memory, or failing to transfer RDB because of client-output-buffer-limit.
In this commit, we add 'replconf rdb-only 0|1', redis doesn't send
incremental replication buffer to them if they send 'replconf rdb-only 1',
so we can reduce used memory and improve success of getting RDB.
It was confusing as to why these don't return a map type.
the reason is that order matters, so we need to make sure the client
library knows to respect it.
Added comments in the implementation and tests to cover it.
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
some tests use attach_to_replication_stream to watch what's propagated
to replicas, but in some cases the periodic ping may slip in and fail
the test.
we disable that ping by setting the period to once an hour (tests should
not run for that long).
other change is so that the next time this oom-score-adj test fails,
we'll see the value (assert_equals prints it)
1. Valgrind leak in a recent change in a module api test
2. Increase treshold of a RESTORE TTL test
3. Change assertions to use assert_range which prints the values
BLPOP and other blocking list commands can only block on empty keys
and LPUSH only wakes up clients when the list is created.
Using the module API, it's possible to block on a non-empty key.
Unblocking a client blocked on a non-empty list (or zset) can only
be done using RedisModule_SignalKeyAsReady(). This commit tests it.
The flag should be set before TLS negotiation begins to avoid a race
condition where a fork+exec before it is completed ends up leaking the
file descriptor.
Fixes a regression introduced due to a new (safer) way of rewriting configuration files. In the past the file was simply overwritten (same inode), but now Redis creates a new temporary file and later renames it over the old one.
The temp file typically gets created with 0600 permissions so we later fchmod it to fix that. Unlike open with O_CREAT, fchmod doesn't consider umask so we have to do that explicitly.
Fixes#8369
the test was misleading because the module would actually woke up on a wrong type and
re-blocked, while the test name suggests the module doesn't not wake up at all on a wrong type..
i changed the name of the test + added verification that indeed the module wakes up and gets
re-blocked after it understand it's the wrong type
The output for COMMAND command was wrong for some commands.
clients can use firstkey,lastkey,step to find (some) key name arguments, and the
"movablekeys" flag to know that they can't know all (or any) of the key name arguments.
These commands had the wrong output:
1. GEORADIUS*_RO used to have "movablekeys" (which it doesn't really need)
2. XREAD and XREADGROUP used to have (1,1,1). but that's completely wrong.
3. Z*STORE used to have (0,0,0) but it can at lest give the index of the dstkey (1,1,1)
Fix broken formatting in `RM_Call` and `RM_CreateDataType`,
`RM_SubscribeToServerEvent` (nested lists, etc. in list items).
Unhide docs of `RM_LoadDataTypeFromString` and
`RM_SaveDataTypeToString` by removing blank line between docs and
function.
Clarification added to `RM__Assert`: Recommentation to use the
`RedisModule_Assert` macro instead.
All names containing underscores (variable and macro names) are
wrapped in backticks (if not already wrapped in backticks). This
prevents underscore from being interpreted as italics in some
cases.
Names including a wildcard star, e.g. RM_Defrag*(), is wrapped in
backticks (and RM replaced by RedisModule in this case). This
prevents the * from being interpreted as an italics marker.
A list item with a sublist, a paragraph and another sublist is a
combination which seems impossible to achieve with RedCarped
markdown, so the one occurrence of this is rewritten.
Various trivial changes (typos, backticks, etc.).
Ruby script:
* Replace `RM_Xyz` with `RedisModule_Xyz` in docs. (RM is correct
when refering to the C code but RedisModule is correct in the
API docs.)
* Automatic backquotes around C functions like `malloc()`.
* Turn URLs into links. The link text is the URL itself.
* Don't add backticks inside bold (**...**)
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
The line that said:
Note: you can disable saving completely by commenting out all "save" lines
was incorrect.
Also, note that the save values used in the default redis.conf file are different than the server's defaults, so this PR also addresses this and introduces a potential behavior change for some users.
