In diskless replication, we create a read pipe for the RDB, between the child and the parent.
When we close this pipe (fd), the read handler also needs to be removed from the event loop (if it still registered).
Otherwise, next time we will use the same fd, the registration will be fail (panic), because
we will use EPOLL_CTL_MOD (the fd still register in the event loop), on fd that already removed from epoll_ctl
(cherry picked from commit 501d7755831527b4237f9ed6050ec84203934e4d)
When client breached the output buffer soft limit but then went idle,
we didn't disconnect on soft limit timeout, now we do.
Note this also resolves some sporadic test failures in due to Linux
buffering data which caused tests to fail if during the test we went
back under the soft COB limit.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
(cherry picked from commit 152fce5e2cbf947a389da414a431f7331981a374)
Use an invalid IP address to trigger CONFIG SET bind failure, instead of DNS which is not guaranteed to always fail.
(cherry picked from commit 2b22fffc787e91df789dabf23ddcf19ecf34cf6f)
When redis-check-aof finds an error, it prints the line number for faster troubleshooting.
(cherry picked from commit 761d7d27711edfbf737def41ff28f5b325fb16c8)
Adding a new type mask for key space notification, REDISMODULE_NOTIFY_MODULE, to enable unique notifications from commands on REDISMODULE_KEYTYPE_MODULE type keys (which is currently unsupported).
Modules can subscribe to a module key keyspace notification by RM_SubscribeToKeyspaceEvents,
and clients by notify-keyspace-events of redis.conf or via the CONFIG SET, with the characters 'd' or 'A'
(REDISMODULE_NOTIFY_MODULE type mask is part of the '**A**ll' notation for key space notifications).
Refactor: move some pubsub test infra from pubsub.tcl to util.tcl to be re-used by other tests.
Before this commit using RM_Call without "!" could cause the master
to lazy-expire a key (delete it) but without replicating to replicas.
This could cause the replica's memory usage to gradually grow and
could also cause consistency issues if the master and replica have
a clock diff.
This bug was introduced in #8617
Added a test which demonstrates that scenario.
In the initial release of Redis 6.2 setting a user to only allow pubsub access to
a specific channel, and doing ACL SAVE, resulted in an assertion when
ACL LOAD was used. This was later changed by #8723 (not yet released),
but still not properly resolved (now it errors instead of crash).
The problem is that the server that generates an ACL file, doesn't know what
would be the setting of the acl-pubsub-default config in the server that will load it.
so ACL SAVE needs to always start with resetchannels directive.
This should still be compatible with old acl files (from redis 6.0), and ones from earlier
versions of 6.2 that didn't mess with channels.
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The tail size of c->reply is 16kb, but in the test only publish a
few chars each time, due to a change in #8699, the obuf limit
is now checked a new memory allocation is made, so this test
would have sometimes failed to trigger a soft limit disconnection
in time.
The solution is to write bigger payloads to the output buffer, but
still limit their rate (not more than 100k/s).
In github actions CI with valgrind, i saw that even the fast replica
(one that wasn't paused), didn't get to complete the replication fast
enough, and ended up getting disconnected by timeout.
Additionally, due to a typo in uname, we didn't get to actually run the
CPU efficiency part of the test.
1. the `dump_logs` option would have printed only logs of servers that were
spawn before the test proc started, and not ones that the test proc
started inside it.
2. when a server proc catches an exception it should normally forward the
exception upwards, specifically when it's an assertion that should be
caught by a test proc above. however, in `durable` mode, we caught all
exceptions printed them to stdout and let the code continue,
this was wrong to do for assertions, which should have still been
propagated to the test function.
3. don't bother to search for crash log to print if we printed the the
entire log anyway
4. if no crash log was found, no need to print anything (i.e. the fact it
wasn't found)
5. rename warnings_from_file to crashlog_from_file
Starting redis 6.0 (part of the TLS feature), diskless master uses pipe from the fork
child so that the parent is the one sending data to the replicas.
This mechanism has an issue in which a hung replica will cause the master to wait
for it to read the data sent to it forever, thus preventing the fork child from terminating
and preventing the creations of any other forks.
This PR adds a timeout mechanism, much like the ACK-based timeout,
we disconnect replicas that aren't reading the RDB file fast enough.
Disable replica migration to avoid a race condition where the
migrated-from node turns into a replica.
Long term, this test should probably be improved to handle multiple
slots and accept such auto migrations but this is a quick fix to
stabilize the CI without completely dropping this test.
Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
With this fix, module data type registration will fail if the load or save callbacks are not defined, or the optional aux load and save callbacks are not either both defined or both missing.
This is work in progress, focusing on two main areas:
* Avoiding race conditions with cluster configuration propagation.
* Ignoring limitations with redis-cli --cluster fix which makes it hard
to distinguish real errors (e.g. failure to fix) from expected
conditions in this test (e.g. nodes not agreeing on configuration).
Background:
Redis 6.2 added ACL control for pubsub channels (#7993), which were supposed
to be permissive by default to retain compatibility with redis 6.0 ACL.
But due to a bug, only newly created users got this `acl-pubsub-default` applied,
while overwritten (updated) users got reset to `resetchannels` (denied).
Since the "default" user exists before loading the config file,
any ACL change to it, results in an update / overwrite.
So when a "default" user is loaded from config file or include ACL
file with no channels related rules, the user will not have any
permissions to any channels. But other users will have default
permissions to any channels.
When upgraded from 6.0 with config rewrite, this will lead to
"default" user channels permissions lost.
When users are loaded from include file, then call "acl load", users
will also lost channels permissions.
Similarly, the `reset` ACL rule, would have reset the user to be denied
access to any channels, ignoring `acl-pubsub-default` and breaking
compatibility with redis 6.0.
The implication of this fix is that it regains compatibility with redis 6.0,
but breaks compatibility with redis 6.2.0 and 2.0.1. e.g. after the upgrade,
the default user will regain access to pubsub channels.
Other changes:
Additionally this commit rename server.acl_pubusub_default to
server.acl_pubsub_default and fix typo in acl tests.
Previously (and by default after commit) when master loose its last slot
(due to migration, for example), its replicas will migrate to new last slot
holder.
There are cases where this is not desired:
* Consolidation that results with removed nodes (including the replica, eventually).
* Manually configured cluster topologies, which the admin wishes to preserve.
Needlessly migrating a replica triggers a full synchronization and can have a negative impact, so
we prefer to be able to avoid it where possible.
This commit adds 'cluster-allow-replica-migration' configuration option that is
enabled by default to preserve existed behavior. When disabled, replicas will
not be auto-migrated.
Fixes#4896
Co-authored-by: Oran Agra <oran@redislabs.com>
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
5629dbe71 added a change that configures the tcp (plaintext) port
alongside the tls port, this causes the INFO command for tcp_port
to return that instead of the tls port when running in tls, and that broke
the sentinel tests that query it.
the fix is to add a method that gets the right port from CONFIG instead
of relying on the tcp_port info field.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
Problem:
Currently, when performing random distribution verification, we determine
the probability of each element occurring in the sum, but the probability is
only an estimate, these tests had rare sporadic failures, and we cannot verify
what the probability of failure will be.
Solution:
Using the chi-square distribution instead of the original random distribution
validation makes the test more reasonable and easier to find problems.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
