371d7f120 added a change that configures the tcp (plaintext) port
alongside the tls port, this causes the INFO command for tcp_port
to return that instead of the tls port when running in tls, and that broke
the sentinel tests that query it.
the fix is to add a method that gets the right port from CONFIG instead
of relying on the tcp_port info field.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
The implications of this change is just that in the past when a config file was missing,
in some cases it was exiting before printing the sever startup prints and sometimes after,
and now it'll always exit before printing them.
There are 2 common range comparators for skiplist: zslValueGteMin and
zslValueLteMax, but they're not being reused in zslDeleteRangeByScore
This is a small change to make code cleaner.
Problem:
Currently, when performing random distribution verification, we determine
the probability of each element occurring in the sum, but the probability is
only an estimate, these tests had rare sporadic failures, and we cannot verify
what the probability of failure will be.
Solution:
Using the chi-square distribution instead of the original random distribution
validation makes the test more reasonable and easier to find problems.
this is a followup PR for #8699
instead of copying the deferred reply data to the previous node only if it has room for the entire thing,
we can now split the new payload, put part of it into the spare space in the prev node,
and the rest may fit into the next node.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
The cluster bus is established over TLS or non-TLS depending on the configuration tls-cluster. The client ports distributed in the cluster and sent to clients are assumed to be TLS or non-TLS also depending on tls-cluster.
The cluster bus is now extended to also contain the non-TLS port of clients in a TLS cluster, when available. The non-TLS port of a cluster node, when available, is sent to clients connected without TLS in responses to CLUSTER SLOTS, CLUSTER NODES, CLUSTER SLAVES and MOVED and ASK redirects, instead of the TLS port.
The user was able to override the client port by defining cluster-announce-port. Now cluster-announce-tls-port is added, so the user can define an alternative announce port for both TLS and non-TLS clients.
Fixes#8134
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
Another test race condition in the macos tests.
the test was waiting for PINGs to be generated and put on the replication stream,
but waiting for 1 or 2 seconds doesn't really guarantee that.
then the test that expected 6 full syncs, found only 4
Add tests for fixing migrating slot at all stages:
1. when migration is half inited on "migrating" node
2. when migration is half inited on "importing" node
3. migration inited, but not finished
4. migration is half finished on "migrating" node
5. migration is half finished on "importing" node
Also add tests for many simultaneous slot migrations.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
'processCommandAndResetClient' returns 1 if client is dead. It does it
by checking if serve.current_client is NULL. On script timeout, Redis will re-enter
'processCommandAndResetClient' and when finish we will set server.current_client
to NULL. This will cause later to falsely return 1 and think that the client that
sent the timed-out script is dead (Redis to stop reading from the client buffer).
In activeDefragSdsListAndDict when defrag list key sucess, the key
in dict is also replaced. Then the corresponding dictEntry is
defraged. But the dictEntry will be defraged in next step by defrag
the dict values too.
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
the corrupt-dump-fuzzer test found a case where an access to a corrupt
stream would have caused accessing to uninitialized memory.
now it'll panic instead.
The issue was that there was a stream that says it has more than 0
records, but looking for the max ID came back empty handed.
p.s. when sanitize-dump-payload is used, this corruption is detected,
and the RESTORE command is gracefully rejected.
We sometimes see the crash report saying we were killed by a random
process even in cases where the crash was spontanius in redis.
for instance, crashes found by the corrupt-dump test.
It looks like this si_pid is sometimes left uninitialized, and a good
way to tell if the crash originated in redis or trigged by outside is to
look at si_code, real signal codes are always > 0, and ones generated by
kill are have si_code of 0 or below.
Reading CoW from /proc/<pid>/smaps can be slow with large processes on
some platforms.
This measures the time it takes to read CoW info and limits the duty
cycle of future updates to roughly 1/100.
As current_cow_size no longer represnets a current, fixed interval value
there is also a new current_cow_size_age field that provides information
about the age of the size value, in seconds.
Since redis 6.2, redis immediately tries to connect to the master, not
waiting for replication cron.
in the slow freebsd CI, this test failed and master_link_status was
already "up" when INFO was called.
pcall function runs another LUA function in protected mode, this means
that any error will be caught by this function and will not stop the LUA
execution. The script kill mechanism uses error to stop the running script.
Scripts that uses pcall can catch the error raise by the script kill mechanism,
this will cause a script like this to be unkillable:
local f = function()
while 1 do
redis.call('ping')
end
end
while 1 do
pcall(f)
end
The fix is, when we want to kill the script, we set the hook function to be invoked
after each line. This will promise that the execution will get another
error before it is able to enter the pcall function again.
Some operating systems (e.g., NetBSD and OpenBSD) have switched to
using a 64-bit integer for time_t on all platforms. This results in currently
harmless compiler warnings due to potential truncation.
These changes fix these minor portability concerns.
* Fix format string for systems with 64 bit time
* use llabs to avoid truncation with 64 bit time
In the long term we may want to move away from anet completely and have
everything implemented natively in connection.c, instead of having an
extra layer.
For now, just get rid of unused code.
In certain scenario start_server may think it failed to start a redis server
although it started successfully. in these cases, it'll not terminate it, and
it'll remain running when the test is over.
In start_server if config doesn't have bind (the minimal.conf in introspection.tcl),
it will try to bind ipv4 and ipv6. One may success while other fails. It will
output "Could not create server TCP listening socket".
wait_server_started uses this message to check whether instance started
successfully. So it will consider that it failed even though redis started successfully.
Additionally, in some cases it wasn't clear to users why the server exited,
since the warning message printed to the log, could in some cases be harmless,
and in some cases fatal.
This PR adds makes a clear distinction between a warning log message and
a fatal one, and changes the test suite to look for the fatal message.
