MEMKIND
DISCLAIMER
SEE COPYING FILE FOR LICENSE INFORMATION.
THIS SOFTWARE IS PROVIDED AS A DEVELOPMENT SNAPSHOT TO AID COLLABORATION AND WAS NOT ISSUED AS A RELEASED PRODUCT BY INTEL.
LAST UPDATE
Krzysztof Kulakowski krzysztof.kulakowski@intel.com Tuesday Mar 1 2016
SUMMARY
The memkind library is a user extensible heap manager built on top of jemalloc which enables control of memory characteristics and a partitioning of the heap between kinds of memory. The kinds of memory are defined by operating system memory policies that have been applied to virtual address ranges. Memory characteristics supported by memkind without user extension include control of NUMA and page size features. The jemalloc non-standard interface has been extended to enable specialized arenas to make requests for virtual memory from the operating system through the memkind partition interface. Through the other memkind interfaces the user can control and extend memory partition features and allocate memory while selecting enabled features.
API
The memkind library delivers two interfaces:
- hbwmalloc.h - recommended for high-bandwidth memory use cases (stable)
- memkind.h - generic interface for more complex use cases (partially unstable)
For more detailed information about those interfaces see corresponding manpages (located in man/ subdir):
man memkind
or
man hbwmalloc
BUILD REQUIREMENTS
To build the memkind libraries on a RHEL Linux system first install the required packages with the following command:
sudo yum install numactl-devel gcc-c++ unzip
On a SLES Linux system install the dependencies with the following command:
sudo zypper install libnuma-devel gcc-c++ unzip
The memkind library uses the GNU autotools (Autoconf, Automake, Libtool and m4) for configuration and build. The configure scripts and gtest source code are distributed with the source tarball included in the source RPM, and this tarball is created with the memkind "make dist" target. In contrast to the distributed source tarball, the git repository does not include any generated files nor the gtest source code. For this reason some additional steps are required when building from a checkout of the git repo. Those steps include running the bash script called "autogen.sh" prior to configure. This script will populate a VERSION file based on "git describe", and use autoreconf to generate a configure script. The gtest library is required for building the test content. This is downloaded automatically prior to building the test content from the googlecode website based on a target describe in memkind/test/Makefile.mk.
BUILDING
a) Building jemalloc
The memkind library has a dependency on a related fork of jemalloc.
The jemalloc source was forked from jemalloc version 5.0. This source tree is located within the jemalloc subdirectory of the memkind source. The jemalloc source code has been kept close to the original form, and in particular the build system has been lightly modified. The developer must configure and build jemalloc prior to configuring and building memkind. You can do that using included shell script:
export JE_PREFIX=jemk_
./build_jemalloc.sh
Alternatively you can follow this step-by-step instruction:
cd jemalloc
autoconf
mkdir obj
cd obj
../configure --enable-autogen --with-jemalloc-prefix=jemk_ --without-export \
--disable-stats --disable-fill \
--with-malloc-conf="narenas:256,lg_tcache_max:12"
make
cd ../..
Note: JE_PREFIX can be set to arbitrary value, including empty one.
b) Building memkind
Building and installing memkind can be as simple as typing the following while in the root directory of the source tree:
./build.sh
make install
Alternatively you can follow this step-by-step instruction:
export JE_PREFIX=jemk_
./autogen.sh
./configure
make
make install
this should configure, build, and install this package.
See the output of:
./configure --help
for more information about either the memkind or the jemalloc configuration options. Some useful information about building with autotools can also be found in the INSTALL file.
Important Notes:
If you are using build.sh script and later want to call 'make' command directly, then you need to call firstly:
export JE_PREFIX=jemk_
otherwise you will get an error like:
undefined reference to mallocx
RUN REQUIREMENTS
Requires kernel patch introduced in Linux v3.11 that impacts functionality of the NUMA system calls. This is patch is commit 3964acd0dbec123aa0a621973a2a0580034b4788 in the linux-stable git repository from kernel.org. Red Hat has back-ported this patch to the v3.10 kernel in the RHEL 7.0 GA release, so RHEL 7.0 onward supports memkind even though this kernel version predates v3.11.
Functionality related to hugepages allocation require patches e0ec90ee7e6f6cbaa6d59ffb48d2a7af5e80e61d and 099730d67417dfee273e9b10ac2560ca7fac7eb9 from kernel org. Without them physical memory may end up being located on incorrect NUMA node.
Applications using the memkind library require that libnuma and libpthread be available for dynamic linking at run time. Both of these libraries should be available by default, but they can be installed on RHEL Linux with the following command:
sudo yum install pthread numactl
and on a SLES Linux system with:
sudo zypper install pthread libnuma
To use the interfaces for obtaining 2MB pages please be sure to follow the instructions here: https://www.kernel.org/doc/Documentation/vm/hugetlbpage.txt and pay particular attention to the use of the procfs files: /proc/sys/vm/nr_hugepages /proc/sys/vm/nr_overcommit_hugepages for enabling the kernel's huge page pool.
To use the file-backed kind of memory (PMEM), please be sure that filesystem which is used for PMEM kind supports FALLOC_FL_PUNCH_HOLE flag: http://man7.org/linux/man-pages/man2/fallocate.2.html
SETTING LOGGING MECHANISM
In memkind library logging mechanism could be enabled by setting MEMKIND_DEBUG environment variable. Setting MEMKIND_DEBUG to "1" enables printing messages like errors and general information about environment to stderr.
SETTING HEAP MANAGER
In memkind library heap management can be adjusted with MEMKIND_HEAP_MANAGER environment variable, which allows for switching to one of the available heap managers. Values: JEMALLOC – sets the jemalloc heap manager TBB – sets Intel Threading Building Blocks heap manager. This option requires installed Intel Threading Building Blocks library. If the MEMKIND_HEAP_MANAGER is not set then the jemalloc heap manager will be used by default.
TESTING
All existing tests pass. For more information on how to execute tests see the CONTRIBUTING file.
When tests are run on a NUMA platform without high bandwidth memory the MEMKIND_HBW_NODES environment variable is used in conjunction with "numactl --membind" to force standard allocations to one NUMA node and high bandwidth allocations through a different NUMA node. See next section for more details.
SIMULATE HIGH BANDWIDTH MEMORY
A method for testing for the benefit of high bandwidth memory on a dual socket Intel(R) Xeon(TM) system is to use the QPI bus to simulate slow memory. This is not an accurate model of the bandwidth and latency characteristics of the Intel's 2nd generation Intel(R) Xeon Phi(TM) Product Family on package memory, but is a reasonable way to determine which data structures rely critically on bandwidth.
If the application a.out has been modified to use high bandwidth memory with the memkind library then this can be done with numactl as follows with the bash shell:
export MEMKIND_HBW_NODES=0
numactl --membind=1 --cpunodebind=0 a.out
or with csh:
setenv MEMKIND_HBW_NODES 0
numactl --membind=1 --cpunodebind=0 a.out
The MEMKIND_HBW_NODES environment variable set to zero will bind high bandwidth allocations to NUMA node 0. The --membind=1 flag to numactl will bind standard allocations, static and stack variables to NUMA node 1. The --cpunodebind=0 option to numactl will bind the process threads to CPUs associated with NUMA node 0. With this configuration standard allocations will be fetched across the QPI bus, and high bandwidth allocations will be local to the process CPU.
NOTES
- Using memkind with Transparent Huge Pages enabled may result in undesirably high memory footprint. To avoid that disable THP using following instruction: https://www.kernel.org/doc/Documentation/vm/transhuge.txt
STATUS
Different interfaces can represent different maturity level (as described in corresponding man pages). Feedback on design and implementation is greatly appreciated.