introduces a NOMKSTREAM option for xadd command, this would be useful for some
use cases when we do not want to create new stream by default:
XADD key [MAXLEN [~|=] <count>] [NOMKSTREAM] <ID or *> [field value] [field value]
Adding [B]LMOVE <src> <dst> RIGHT|LEFT RIGHT|LEFT. deprecating [B]RPOPLPUSH.
Note that when receiving a BRPOPLPUSH we'll still propagate an RPOPLPUSH,
but on BLMOVE RIGHT LEFT we'll propagate an LMOVE
improvement to existing tests
- Replace "after 1000" with "wait_for_condition" when wait for
clients to block/unblock.
- Add a pre-existing element to target list on basic tests so
that we can check if the new element was added to the correct
side of the list.
- check command stats on the replica to make sure the right
command was replicated
Co-authored-by: Oran Agra <oran@redislabs.com>
Add optional GET parameter to SET command in order to set a new value to
a key and retrieve the old key value. With this change we can deprecate
`GETSET` command and use only the SET command with the GET parameter.
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
This is a rebased version of #3078 originally by shaharmor
with the following patches by TysonAndre made after rebasing
to work with the updated C API:
1. Add 2 more unit tests
(wrong argument count error message, integer over 64 bits)
2. Use addReplyArrayLen instead of addReplyMultiBulkLen.
3. Undo changes to src/help.h - for the ZMSCORE PR,
I heard those should instead be automatically
generated from the redis-doc repo if it gets updated
Motivations:
- Example use case: Client code to efficiently check if each element of a set
of 1000 items is a member of a set of 10 million items.
(Similar to reasons for working on #7593)
- HMGET and ZMSCORE already exist. This may lead to developers deciding
to implement functionality that's best suited to a regular set with a
data type of sorted set or hash map instead, for the multi-get support.
Currently, multi commands or lua scripting to call sismember multiple times
would almost definitely be less efficient than a native smismember
for the following reasons:
- Need to fetch the set from the string every time
instead of reusing the C pointer.
- Using pipelining or multi-commands would result in more bytes sent
and received by the client for the repeated SISMEMBER KEY sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- Proposed solutions using Lua or SADD/SDIFF could trigger writes to
memory, which is undesirable on a redis replica server
or when commands get replicated to replicas.
Co-Authored-By: Shahar Mor <shahar@peer5.com>
Co-Authored-By: Tyson Andre <tysonandre775@hotmail.com>
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
STRALGO should be a container for mostly read-only string
algorithms in Redis. The algorithms should have two main
characteristics:
1. They should be non trivial to compute, and often not part of
programming language standard libraries.
2. They should be fast enough that it is a good idea to have optimized C
implementations.
Next thing I would love to see? A small strings compression algorithm.
First, we must parse the IDs, so that we abort ASAP.
The return value of this command cannot be an error if
the client successfully acknowledged some messages,
so it should be executed in a "all or nothing" fashion.
the AOF will be loaded successfully, but the stream will be missing,
i.e inconsistencies with the original db.
this was because XADD with id of 0-0 would error.
add a test to reproduce.
This bug affected RM_StringToLongDouble and HINCRBYFLOAT.
I added tests for both cases.
Main changes:
1. Fixed string2ld to fail if string contains \0 in the middle
2. Use string2ld in getLongDoubleFromObject - No point of
having duplicated code here
The two changes above broke RM_SaveLongDouble/RM_LoadLongDouble
because the long double string was saved with length+1 (An innocent
mistake, but it's actually a bug - The length passed to
RM_SaveLongDouble should not include the last \0).
This commit solves the following bug:
127.0.0.1:6379> XGROUP CREATE x grp $ MKSTREAM
OK
127.0.0.1:6379> XADD x 666 f v
"666-0"
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) 1) 1) "666-0"
2) 1) "f"
2) "v"
127.0.0.1:6379> XADD x 667 f v
"667-0"
127.0.0.1:6379> XDEL x 667
(integer) 1
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) (empty array)
The root cause is that we use s->last_id in streamCompareID
while we should use the last *valid* ID
This commit solves several edge cases that are related to
exhausting the streamID limits: We should correctly calculate
the succeeding streamID instead of blindly incrementing 'seq'
This affects both XREAD and XADD.
Other (unrelated) changes:
Reply with a better error message when trying to add an entry
to a stream that has exhausted last_id
Calling XADD with 0-0 or 0 would result in creating an
empty key and storing it in the database.
Even worse, because XADD will reply with error the action
will not be replicated, creating a master-replica
inconsistency
The XCLAIM docs state the XCLAIM increments the delivery counter for
messages. This PR makes the code match the documentation - which seems
like the desired behaviour - whilst still allowing RETRYCOUNT to be
specified manually.
My understanding of the way streamPropagateXCLAIM() works is that this
change will safely propagate to replicas since retry count is pulled
directly from the streamNACK struct.
Fixes#5194
