* Remove linux/version.h dependency.
This introduces unnecessary dependencies, and generally not a good idea
as the platform we build on may be different than the platform we run
on.
To determine if sync_file_range exists we can simply rely on header file
hints.
* Fix setproctitle() on libmusl.
The previous ifdef checks were a bit too strict for no apparent
reason.
* Fix tests failure on Linux with no backtrace.
* Add alpine daily CI job.
* Remove linux/version.h dependency.
This introduces unnecessary dependencies, and generally not a good idea
as the platform we build on may be different than the platform we run
on.
To determine if sync_file_range exists we can simply rely on header file
hints.
* Fix setproctitle() on libmusl.
The previous ifdef checks were a bit too strict for no apparent
reason.
* Fix tests failure on Linux with no backtrace.
* Add alpine daily CI job.
On 32-bit systems, setting the proto-max-bulk-len config parameter to a high value may result with integer overflow and a subsequent heap overflow when parsing an input bulk (CVE-2021-21309).
This fix has two parts:
Set a reasonable limit to the config parameter.
Add additional checks to prevent the problem in other potential but unknown code paths.
On 32-bit systems, setting the proto-max-bulk-len config parameter to a high value may result with integer overflow and a subsequent heap overflow when parsing an input bulk (CVE-2021-21309).
This fix has two parts:
Set a reasonable limit to the config parameter.
Add additional checks to prevent the problem in other potential but unknown code paths.
This validation was only done for sub-commands and not for commands.
These would have been valid (not produce any error)
ACL SETUSER bob +@all +client
ACL SETUSER bob +client +client
so no reason for this one to fail:
ACL SETUSER bob +client +client|id
One example why this is needed is that pfdebug wasn't part of the @hyperloglog
group and now it is. so something like:
acl setuser user1 +@hyperloglog +pfdebug|test
would have succeeded in early 6.0.x, and fail in 6.2 RC3
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This validation was only done for sub-commands and not for commands.
These would have been valid (not produce any error)
ACL SETUSER bob +@all +client
ACL SETUSER bob +client +client
so no reason for this one to fail:
ACL SETUSER bob +client +client|id
One example why this is needed is that pfdebug wasn't part of the @hyperloglog
group and now it is. so something like:
acl setuser user1 +@hyperloglog +pfdebug|test
would have succeeded in early 6.0.x, and fail in 6.2 RC3
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
SRANDMEMBER with negative count (non unique) can return the same member
multiple times, and the order of elements in the returned collection matters.
For these reasons returning a RESP3 Set type is not valid for the negative
count, but also not really valid for the positive (unique) variant either (the
command returns an array of random picks, not a set)
This PR also contains a minor optimization for SRANDMEMBER, HRANDFIELD,
and ZRANDMEMBER, to avoid the temporary dict from being rehashed while it grows.
Co-authored-by: Oran Agra <oran@redislabs.com>
SRANDMEMBER with negative count (non unique) can return the same member
multiple times, and the order of elements in the returned collection matters.
For these reasons returning a RESP3 Set type is not valid for the negative
count, but also not really valid for the positive (unique) variant either (the
command returns an array of random picks, not a set)
This PR also contains a minor optimization for SRANDMEMBER, HRANDFIELD,
and ZRANDMEMBER, to avoid the temporary dict from being rehashed while it grows.
Co-authored-by: Oran Agra <oran@redislabs.com>
Originally this was limited to IPv6 address length, but effectively it
has been used for host names and now that Sentinel accepts that as well
we need to be able to store full hostnames.
Fixes#8507
Originally this was limited to IPv6 address length, but effectively it
has been used for host names and now that Sentinel accepts that as well
we need to be able to store full hostnames.
Fixes#8507
When redis responds with tracking-redir-broken push message (RESP3),
it was responding with a broken protocol: an array of 3 elements, but only
pushes 2 elements.
Some bugs in the test make this pass. Read the push reply
will consume an extra reply, because the reply length is 3, but there
are only two elements, so the next reply will be treated as third
element. So the test is corrected too.
Other changes:
* checkPrefixCollisionsOrReply success should return 1 instead of -1,
this bug didn't have any implications.
* improve client tracking tests to validate more of the response it reads.
When redis responds with tracking-redir-broken push message (RESP3),
it was responding with a broken protocol: an array of 3 elements, but only
pushes 2 elements.
Some bugs in the test make this pass. Read the push reply
will consume an extra reply, because the reply length is 3, but there
are only two elements, so the next reply will be treated as third
element. So the test is corrected too.
Other changes:
* checkPrefixCollisionsOrReply success should return 1 instead of -1,
this bug didn't have any implications.
* improve client tracking tests to validate more of the response it reads.
Respond with error if expire time overflows from positive to negative of vice versa.
* `SETEX`, `SET EX`, `GETEX` etc would have already error on negative value,
but now they would also error on overflows (i.e. when the input was positive but
after the manipulation it becomes negative, which would have passed before)
* `EXPIRE` and `EXPIREAT` was ok taking negative values (would implicitly delete
the key), we keep that, but we do error if the user provided a value that changes
sign when manipulated (except the case of changing sign when `basetime` is added)
Signed-off-by: Gnanesh <gnaneshkunal@outlook.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Respond with error if expire time overflows from positive to negative of vice versa.
* `SETEX`, `SET EX`, `GETEX` etc would have already error on negative value,
but now they would also error on overflows (i.e. when the input was positive but
after the manipulation it becomes negative, which would have passed before)
* `EXPIRE` and `EXPIREAT` was ok taking negative values (would implicitly delete
the key), we keep that, but we do error if the user provided a value that changes
sign when manipulated (except the case of changing sign when `basetime` is added)
Signed-off-by: Gnanesh <gnaneshkunal@outlook.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The `dict` field `iterators` is misleading and incorrect.
This variable is used for 1 purpose - to pause rehashing.
The current `iterators` field doesn't actually count "iterators".
It counts "safe iterators". But - it doesn't actually count safe iterators
either. For one, it's only incremented once the safe iterator begins to
iterate, not when it's created. It's also incremented in `dictScan` to
prevent rehashing (and commented to make it clear why `iterators` is
being incremented during a scan).
This update renames the field as `pauserehash` and creates 2 helper
macros `dictPauseRehashing(d)` and `dictResumeRehashing(d)`
The `dict` field `iterators` is misleading and incorrect.
This variable is used for 1 purpose - to pause rehashing.
The current `iterators` field doesn't actually count "iterators".
It counts "safe iterators". But - it doesn't actually count safe iterators
either. For one, it's only incremented once the safe iterator begins to
iterate, not when it's created. It's also incremented in `dictScan` to
prevent rehashing (and commented to make it clear why `iterators` is
being incremented during a scan).
This update renames the field as `pauserehash` and creates 2 helper
macros `dictPauseRehashing(d)` and `dictResumeRehashing(d)`
Avoid repeated reallocs growing the listpack while entries are being added.
This is done by pre-allocating the listpack to near maximum size, and using
malloc_size to check if it needs realloc or not.
When the listpack reaches the maximum number of entries, we shrink it to fit it's used size.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
Co-authored-by: Oran Agra <oran@redislabs.com>
Avoid repeated reallocs growing the listpack while entries are being added.
This is done by pre-allocating the listpack to near maximum size, and using
malloc_size to check if it needs realloc or not.
When the listpack reaches the maximum number of entries, we shrink it to fit it's used size.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
Co-authored-by: Oran Agra <oran@redislabs.com>
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
Avoids memmove and reallocs when replacing a ziplist element of the
same encoded size as the new value.
Affects HSET, HINRBY, HINCRBYFLOAT (via hashTypeSet) and LSET (via
quicklistReplaceAtIndex).
Avoids memmove and reallocs when replacing a ziplist element of the
same encoded size as the new value.
Affects HSET, HINRBY, HINCRBYFLOAT (via hashTypeSet) and LSET (via
quicklistReplaceAtIndex).
