GETBIT, SETBIT may access wrong address because of wrap.
BITCOUNT and BITPOS may return wrapped results.
BITFIELD may access the wrong address but also allocate insufficient memory and segfault (see CVE-2021-32761).
This commit uses `uint64_t` or `long long` instead of `size_t`.
related https://github.com/redis/redis/pull/8096
At 32bit platform:
> setbit bit 4294967295 1
(integer) 0
> config set proto-max-bulk-len 536870913
OK
> append bit "\xFF"
(integer) 536870913
> getbit bit 4294967296
(integer) 0
When the bit index is larger than 4294967295, size_t can't hold bit index. In the past, `proto-max-bulk-len` is limit to 536870912, so there is no problem.
After this commit, bit position is stored in `uint64_t` or `long long`. So when `proto-max-bulk-len > 536870912`, 32bit platforms can still be correct.
For 64bit platform, this problem still exists. The major reason is bit pos 8 times of byte pos. When proto-max-bulk-len is very larger, bit pos may overflow.
But at 64bit platform, we don't have so long string. So this bug may never happen.
Additionally this commit add a test cost `512MB` memory which is tag as `large-memory`. Make freebsd ci and valgrind ci ignore this test.
(cherry picked from commit 71d452876ebf8456afaadd6b3c27988abadd1148)
GETBIT, SETBIT may access wrong address because of wrap.
BITCOUNT and BITPOS may return wrapped results.
BITFIELD may access the wrong address but also allocate insufficient memory and segfault (see CVE-2021-32761).
This commit uses `uint64_t` or `long long` instead of `size_t`.
related https://github.com/redis/redis/pull/8096
At 32bit platform:
> setbit bit 4294967295 1
(integer) 0
> config set proto-max-bulk-len 536870913
OK
> append bit "\xFF"
(integer) 536870913
> getbit bit 4294967296
(integer) 0
When the bit index is larger than 4294967295, size_t can't hold bit index. In the past, `proto-max-bulk-len` is limit to 536870912, so there is no problem.
After this commit, bit position is stored in `uint64_t` or `long long`. So when `proto-max-bulk-len > 536870912`, 32bit platforms can still be correct.
For 64bit platform, this problem still exists. The major reason is bit pos 8 times of byte pos. When proto-max-bulk-len is very larger, bit pos may overflow.
But at 64bit platform, we don't have so long string. So this bug may never happen.
Additionally this commit add a test cost `512MB` memory which is tag as `large-memory`. Make freebsd ci and valgrind ci ignore this test.
(cherry picked from commit 71d452876ebf8456afaadd6b3c27988abadd1148)
src/modules make failed. As in #3718 testmodule.c was removed. But the makefile was not updated
(cherry picked from commit d54c9086c267d20bb6981f5a60f589e93b662d62)
src/modules make failed. As in #3718 testmodule.c was removed. But the makefile was not updated
(cherry picked from commit d54c9086c267d20bb6981f5a60f589e93b662d62)
- Introduce a new sdssubstr api as a building block for sdsrange.
The API of sdsrange is many times hard to work with and also has
corner case that cause bugs. sdsrange is easy to work with and also
simplifies the implementation of sdsrange.
- Revert the fix to RM_StringTruncate and just use sdssubstr instead of
sdsrange.
- Solve valgrind warnings from the new tests introduced by the previous
PR.
(cherry picked from commit ae418eca24ba53a7dca07b0e7065f856e625469b)
- Introduce a new sdssubstr api as a building block for sdsrange.
The API of sdsrange is many times hard to work with and also has
corner case that cause bugs. sdsrange is easy to work with and also
simplifies the implementation of sdsrange.
- Revert the fix to RM_StringTruncate and just use sdssubstr instead of
sdsrange.
- Solve valgrind warnings from the new tests introduced by the previous
PR.
(cherry picked from commit ae418eca24ba53a7dca07b0e7065f856e625469b)
Fix module info genModulesInfoStringRenderModulesList lack separator when there's more than one module in the list.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 1895e134a77efd789b1a6daee76a6ba5ec90e516)
Fix module info genModulesInfoStringRenderModulesList lack separator when there's more than one module in the list.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 1895e134a77efd789b1a6daee76a6ba5ec90e516)
in case dest key already contains the member, the dest key isn't modified, so the command shouldn't invalidate watch.
(cherry picked from commit 11dc4e59b365d6cd8699604d7d1c1025b6bb6259)
in case dest key already contains the member, the dest key isn't modified, so the command shouldn't invalidate watch.
(cherry picked from commit 11dc4e59b365d6cd8699604d7d1c1025b6bb6259)
Modules that use background threads with thread safe contexts are likely
to use RM_BlockClient() without a timeout function, because they do not
set up a timeout.
Before this commit, `CLIENT UNBLOCK` would result with a crash as the
`NULL` timeout callback is called. Beyond just crashing, this is also
logically wrong as it may throw the module into an unexpected client
state.
This commits makes `CLIENT UNBLOCK` on such clients behave the same as
any other client that is not in a blocked state and therefore cannot be
unblocked.
(cherry picked from commit aa139e2f02292d668370afde8c91575363c2d611)
Modules that use background threads with thread safe contexts are likely
to use RM_BlockClient() without a timeout function, because they do not
set up a timeout.
Before this commit, `CLIENT UNBLOCK` would result with a crash as the
`NULL` timeout callback is called. Beyond just crashing, this is also
logically wrong as it may throw the module into an unexpected client
state.
This commits makes `CLIENT UNBLOCK` on such clients behave the same as
any other client that is not in a blocked state and therefore cannot be
unblocked.
(cherry picked from commit aa139e2f02292d668370afde8c91575363c2d611)
In clusterManagerCommandImport strcat was used to concat COPY and
REPLACE, the space maybe not enough.
If we use --cluster-replace but not --cluster-copy, the MIGRATE
command contained COPY instead of REPLACE.
(cherry picked from commit a049f6295a28a20b11eff89083e91dab0738413b)
In clusterManagerCommandImport strcat was used to concat COPY and
REPLACE, the space maybe not enough.
If we use --cluster-replace but not --cluster-copy, the MIGRATE
command contained COPY instead of REPLACE.
(cherry picked from commit a049f6295a28a20b11eff89083e91dab0738413b)
SINTERSTORE would have deleted the dest key right away,
even when later on it is bound to fail on an (WRONGTYPE) error.
With this change it first picks up all the input keys, and only later
delete the dest key if one is empty.
Also add more tests for some commands.
Mainly focus on
- `wrong type error`:
expand test case (base on sinter bug) in non-store variant
add tests for store variant (although it exists in non-store variant, i think it would be better to have same tests)
- the dstkey result when we meet `non-exist key (empty set)` in *store
sdiff:
- improve test case about wrong type error (the one we found in sinter, although it is safe in sdiff)
- add test about using non-exist key (treat it like an empty set)
sdiffstore:
- according to sdiff test case, also add some tests about `wrong type error` and `non-exist key`
- the different is that in sdiffstore, we will consider the `dstkey` result
sunion/sunionstore add more tests (same as above)
sinter/sinterstore also same as above ...
(cherry picked from commit b8a5da80c49501773f8778aaf5cbf595cef615e4)
SINTERSTORE would have deleted the dest key right away,
even when later on it is bound to fail on an (WRONGTYPE) error.
With this change it first picks up all the input keys, and only later
delete the dest key if one is empty.
Also add more tests for some commands.
Mainly focus on
- `wrong type error`:
expand test case (base on sinter bug) in non-store variant
add tests for store variant (although it exists in non-store variant, i think it would be better to have same tests)
- the dstkey result when we meet `non-exist key (empty set)` in *store
sdiff:
- improve test case about wrong type error (the one we found in sinter, although it is safe in sdiff)
- add test about using non-exist key (treat it like an empty set)
sdiffstore:
- according to sdiff test case, also add some tests about `wrong type error` and `non-exist key`
- the different is that in sdiffstore, we will consider the `dstkey` result
sunion/sunionstore add more tests (same as above)
sinter/sinterstore also same as above ...
(cherry picked from commit b8a5da80c49501773f8778aaf5cbf595cef615e4)
When using RESP3, ZPOPMAX/ZPOPMIN should return nested arrays for consistency
with other commands (e.g. ZRANGE).
We do that only when COUNT argument is present (similarly to how LPOP behaves).
for reasoning see https://github.com/redis/redis/issues/8824#issuecomment-855427955
This is a breaking change only when RESP3 is used, and COUNT argument is present!
(cherry picked from commit 7f342020dcbdf9abe754d6b666efdeded7063870)
When using RESP3, ZPOPMAX/ZPOPMIN should return nested arrays for consistency
with other commands (e.g. ZRANGE).
We do that only when COUNT argument is present (similarly to how LPOP behaves).
for reasoning see https://github.com/redis/redis/issues/8824#issuecomment-855427955
This is a breaking change only when RESP3 is used, and COUNT argument is present!
(cherry picked from commit 7f342020dcbdf9abe754d6b666efdeded7063870)
1. redis-cli can output --rdb data to stdout
but redis-cli also write some messages to stdout which will mess up the rdb.
2. Make redis-cli flush stdout when printing a reply
This was needed in order to fix a hung in redis-cli test that uses
--replica.
Note that printf does flush when there's a newline, but fwrite does not.
3. fix the redis-cli --replica test which used to pass previously
because it didn't really care what it read, and because redis-cli
used printf to print these other things to stdout.
4. improve redis-cli --replica test to run with both diskless and disk-based.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
(cherry picked from commit 1eb4baa5b8e76adc337ae9fab49acc2585a0cdd0)
1. redis-cli can output --rdb data to stdout
but redis-cli also write some messages to stdout which will mess up the rdb.
2. Make redis-cli flush stdout when printing a reply
This was needed in order to fix a hung in redis-cli test that uses
--replica.
Note that printf does flush when there's a newline, but fwrite does not.
3. fix the redis-cli --replica test which used to pass previously
because it didn't really care what it read, and because redis-cli
used printf to print these other things to stdout.
4. improve redis-cli --replica test to run with both diskless and disk-based.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
(cherry picked from commit 1eb4baa5b8e76adc337ae9fab49acc2585a0cdd0)
- promote the code in DEBUG PROTOCOL to addReplyBigNum
- DEBUG PROTOCOL ATTRIB skips the attribute when client is RESP2
- networking.c addReply for push and attributes generate assertion when
called on a RESP2 client, anything else would produce a broken
protocol that clients can't handle.
(cherry picked from commit 6a5bac309e868deef749c36949723b415de2496f)
- promote the code in DEBUG PROTOCOL to addReplyBigNum
- DEBUG PROTOCOL ATTRIB skips the attribute when client is RESP2
- networking.c addReply for push and attributes generate assertion when
called on a RESP2 client, anything else would produce a broken
protocol that clients can't handle.
(cherry picked from commit 6a5bac309e868deef749c36949723b415de2496f)
due to a copy-paste bug, it used to reply with null response rather than empty array.
this commit includes new tests that are looking at the RESP response directly in
order to be able to tell the difference between them.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit a418a2d3fc0250c094802d7e8ea64d96eedfda07)
