Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
Problem:
Currently, when performing random distribution verification, we determine
the probability of each element occurring in the sum, but the probability is
only an estimate, these tests had rare sporadic failures, and we cannot verify
what the probability of failure will be.
Solution:
Using the chi-square distribution instead of the original random distribution
validation makes the test more reasonable and easier to find problems.
Changes to HRANDFIELD and ZRANDMEMBER:
* Fix risk of OOM panic when client query a very big negative count (avoid allocating huge temporary buffer).
* Fix uneven random distribution in HRANDFIELD with negative count (wasn't using dictGetFairRandomKey).
* Add tests to check an even random distribution (HRANDFIELD, SRANDMEMBER, ZRANDMEMBER).
Co-authored-by: Oran Agra <oran@redislabs.com>
New commands:
`HRANDFIELD [<count> [WITHVALUES]]`
`ZRANDMEMBER [<count> [WITHSCORES]]`
Algorithms are similar to the one in SRANDMEMBER.
Both return a simple bulk response when no arguments are given, and an array otherwise.
In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
note: in all 3 commands, the only option that also provides random order is the one with negative count.
Changes to SRANDMEMBER
* Optimization when count is 1, we can use the more efficient algorithm of non-unique random
* optimization: work with sds strings rather than robj
Other changes:
* zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
case the buffer is too small)
* Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
case 4) and by accident used a negative count
Co-authored-by: xinluton <xinluton@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
It was confusing as to why these don't return a map type.
the reason is that order matters, so we need to make sure the client
library knows to respect it.
Added comments in the implementation and tests to cover it.
This PR adds another trimming strategy to XADD and XTRIM named MINID
(complements the existing MAXLEN).
It also adds a new LIMIT argument that allows incremental trimming by repeated
calls (rather than all at once).
This provides the ability to trim all records older than a certain ID (which makes it
possible for the user to trim by age too).
Example:
XTRIM mystream MINID ~ 1608540753 will trim entries with id < 1608540753,
but might not trim all (because of the ~ modifier)
The purpose is to ease the use of streams. many users use streams as logs and
the common case is wanting a log
of the last X seconds rather than a log that contains maximum X entries (new
MINID vs existing MAXLEN)
The new LIMIT modifier is only supported when the trim strategy uses ~.
i.e. when the user asked for exact trimming, it all happens in one go (no
possibility for incremental trimming).
However, when ~ is provided, we trim full rax nodes, up to the limit number
of records.
The default limit is 100*stream_node_max_entries (used when LIMIT is not
provided).
I.e. this is a behavior change (even if the existing MAXLEN strategy is used).
An explicit limit of 0 means unlimited (but note that it's not the default).
Other changes:
Refactor arg parsing code for XADD and XTRIM to use common code.
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
when the same consumer re-claim an entry that it already has, there's
no need to remove-and-insert if it's the same rax.
we do need to update the idle time though.
this commit only improves efficiency (doesn't change behavior).
- improve stream rdb encoding test to include more types of stream metadata
- add test to cover various ziplist encoding entries (although it does
look like the stress test above it is able to find some too
- add another test for ziplist encoding for hash with full sanitization
- add similar ziplist encoding tests for list
ZREVRANGEBYSCORE key max min [WITHSCORES] [LIMIT offset count]
When the offset is too large, the query is very slow. Especially when the offset is greater than the length of zset it is easy to determine whether the offset is greater than the length of zset at first, and If it exceed the length of zset, then return directly.
Co-authored-by: Oran Agra <oran@redislabs.com>
- Add ZDIFF and ZDIFFSTORE which work similarly to SDIFF and SDIFFSTORE
- Make sure the new WITHSCORES argument that was added for ZUNION isn't considered valid for ZUNIONSTORE
Co-authored-by: Oran Agra <oran@redislabs.com>
introduces a NOMKSTREAM option for xadd command, this would be useful for some
use cases when we do not want to create new stream by default:
XADD key [MAXLEN [~|=] <count>] [NOMKSTREAM] <ID or *> [field value] [field value]
Adding [B]LMOVE <src> <dst> RIGHT|LEFT RIGHT|LEFT. deprecating [B]RPOPLPUSH.
Note that when receiving a BRPOPLPUSH we'll still propagate an RPOPLPUSH,
but on BLMOVE RIGHT LEFT we'll propagate an LMOVE
improvement to existing tests
- Replace "after 1000" with "wait_for_condition" when wait for
clients to block/unblock.
- Add a pre-existing element to target list on basic tests so
that we can check if the new element was added to the correct
side of the list.
- check command stats on the replica to make sure the right
command was replicated
Co-authored-by: Oran Agra <oran@redislabs.com>
Add optional GET parameter to SET command in order to set a new value to
a key and retrieve the old key value. With this change we can deprecate
`GETSET` command and use only the SET command with the GET parameter.
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
(cherry picked from commit 7a555da64f56a4fb2f300d84a35778bee8f471ca)
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
This is a rebased version of #3078 originally by shaharmor
with the following patches by TysonAndre made after rebasing
to work with the updated C API:
1. Add 2 more unit tests
(wrong argument count error message, integer over 64 bits)
2. Use addReplyArrayLen instead of addReplyMultiBulkLen.
3. Undo changes to src/help.h - for the ZMSCORE PR,
I heard those should instead be automatically
generated from the redis-doc repo if it gets updated
Motivations:
- Example use case: Client code to efficiently check if each element of a set
of 1000 items is a member of a set of 10 million items.
(Similar to reasons for working on #7593)
- HMGET and ZMSCORE already exist. This may lead to developers deciding
to implement functionality that's best suited to a regular set with a
data type of sorted set or hash map instead, for the multi-get support.
Currently, multi commands or lua scripting to call sismember multiple times
would almost definitely be less efficient than a native smismember
for the following reasons:
- Need to fetch the set from the string every time
instead of reusing the C pointer.
- Using pipelining or multi-commands would result in more bytes sent
and received by the client for the repeated SISMEMBER KEY sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- Proposed solutions using Lua or SADD/SDIFF could trigger writes to
memory, which is undesirable on a redis replica server
or when commands get replicated to replicas.
Co-Authored-By: Shahar Mor <shahar@peer5.com>
Co-Authored-By: Tyson Andre <tysonandre775@hotmail.com>
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 6b53c630d92c8fbeb9bea0c406c9454fb68b8467)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
