Make sure we handle short writes correctly, sync to disk after writing and use
rename to make sure the replacement is actually atomic.
In any case of failure old configuration will remain in place.
Also, add some additional logging to make it easier to diagnose rewrite problems.
We should sync temp DB file before renaming as rdb_fsync_range does not use
flag `SYNC_FILE_RANGE_WAIT_AFTER`.
Refer to `Linux Programmer's Manual`:
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing any write.
When fclose would fail, the previous implementation would have attempted to do fclose again
this can in theory lead to segfault.
other changes:
check for non-zero return value as failure rather than a specific error code.
this doesn't fix a real bug, just a minor cleanup.
Before this commit, we would have continued to add replies to the reply buffer even if client
output buffer limit is reached, so the used memory would keep increasing over the configured limit.
What's more, we shouldn’t write any reply to the client if it is set 'CLIENT_CLOSE_ASAP' flag
because that doesn't conform to its definition and we will close all clients flagged with
'CLIENT_CLOSE_ASAP' in ‘beforeSleep’.
Because of code execution order, before this, we may firstly write to part of the replies to
the socket before disconnecting it, but in fact, we may can’t send the full replies to clients
since OS socket buffer is limited. But this unexpected behavior makes some commands work well,
for instance ACL DELUSER, if the client deletes the current user, we need to send reply to client
and close the connection, but before, we close the client firstly and write the reply to reply
buffer. secondly, we shouldn't do this despite the fact it works well in most cases.
We add a flag 'CLIENT_CLOSE_AFTER_COMMAND' to mark clients, this flag means we will close the
client after executing commands and send all entire replies, so that we can write replies to
reply buffer during executing commands, send replies to clients, and close them later.
We also fix some implicit problems. If client output buffer limit is enforced in 'multi/exec',
all commands will be executed completely in redis and clients will not read any reply instead of
partial replies. Even more, if the client executes 'ACL deluser' the using user in 'multi/exec',
it will not read the replies after 'ACL deluser' just like before executing 'client kill' itself
in 'multi/exec'.
We added some tests for output buffer limit breach during multi-exec and using a pipeline of
many small commands rather than one with big response.
Co-authored-by: Oran Agra <oran@redislabs.com>
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
This happens only on diskless replicas when attempting to reconnect after
failing to load an RDB file. It is more likely to occur with larger datasets.
After reconnection is initiated, replicationEmptyDbCallback() may get called
and try to write to an unconnected socket. This triggered another issue where
the connection is put into an error state and the connect handler never gets
called. The problem is a regression introduced by commit cad93ed.
When all replicas waiting for a bgsave get disconnected (possibly due to output buffer limit),
It may be good to kill the bgsave child. in diskless replication it already happens, but in
disk-based, the child may still serve some purpose (for persistence).
By killing the child, we prevent it from eating COW memory in vain, and we also allow a new child fork sooner for the next full synchronization or bgsave.
We do that only if rdb persistence wasn't enabled in the configuration.
Btw, now, rdbRemoveTempFile in killRDBChild won't block server, so we can killRDBChild safely.
This commit adds streamIteratorStop call in rewriteStreamObject function in some of the return statement. Although currently this will not cause memory leak since stream id is only 16 bytes long.
Change `val` to `unsigned char` before being tested.
The fix is identical to the one that's been made in upstream jemalloc.
warning is:
src/malloc_io.c: In function ‘malloc_vsnprintf’:
src/malloc_io.c:369:2: warning: case label value exceeds maximum value for type
369 | case '?' | 0x80: \
| ^~~~
src/malloc_io.c:581:5: note: in expansion of macro ‘GET_ARG_NUMERIC’
581 | GET_ARG_NUMERIC(val, 'p');
| ^~~~~~~~~~~~~~~
Refine comment of makeThreadKillable().
This commit can be backported to 5.0, only if we also backport cf8a6e3.
Co-authored-by: Oran Agra <oran@redislabs.com>
6918ebc introudced a makefile script that detects if the toolchain
supports c11, and it looked that it was passing on MacOS and fails on
Ubuntu, looks like Ubuntu's Dash was spawning a background process,
deleted foo.c before gcc tried to compile it.
We're already using bg_unlink in several places to delete the rdb file in the background,
and avoid paying the cost of the deletion from our main thread.
This commit uses bg_unlink to remove the temporary rdb file in the background too.
However, in case we delete that rdb file just before exiting, we don't actually wait for the
background thread or the main thread to delete it, and just let the OS clean up after us.
i.e. we open the file, unlink it and exit with the fd still open.
Furthermore, rdbRemoveTempFile can be called from a thread and was using snprintf which is
not async-signal-safe, we now use ll2string instead.
Redis 6.0 introduces I/O threads, it is so cool and efficient, we use C11
_Atomic to establish inter-thread synchronization without mutex. But the
compiler that must supports C11 _Atomic can compile redis code, that brings a
lot of inconvenience since some common platforms can't support by default such
as CentOS7, so we want to implement redis atomic type to make it more portable.
We have implemented our atomic variable for redis that only has 'relaxed'
operations in src/atomicvar.h, so we implement some operations with
'sequentially-consistent', just like the default behavior of C11 _Atomic that
can establish inter-thread synchronization. And we replace all uses of C11
_Atomic with redis atomic variable.
Our implementation of redis atomic variable uses C11 _Atomic, __atomic or
__sync macros if available, it supports most common platforms, and we will
detect automatically which feature we use. In Makefile we use a dummy file to
detect if the compiler supports C11 _Atomic. Now for gcc, we can compile redis
code theoretically if your gcc version is not less than 4.1.2(starts to support
__sync_xxx operations). Otherwise, we remove use mutex fallback to implement
redis atomic variable for performance and test. You will get compiling errors
if your compiler doesn't support all features of above.
For cover redis atomic variable tests, we add other CI jobs that build redis on
CentOS6 and CentOS7 and workflow daily jobs that run the tests on them.
For them, we just install gcc by default in order to cover different compiler
versions, gcc is 4.4.7 by default installation on CentOS6 and 4.8.5 on CentOS7.
We restore the feature that we can test redis with Helgrind to find data race
errors. But you need install Valgrind in the default path configuration firstly
before running your tests, since we use macros in helgrind.h to tell Helgrind
inter-thread happens-before relationship explicitly for avoiding false positives.
Please open an issue on github if you find data race errors relate to this commit.
Unrelated:
- Fix redefinition of typedef 'RedisModuleUserChangedFunc'
For some old version compilers, they will report errors or warnings, if we
re-define function type.
If one thread got SIGSEGV, function sigsegvHandler() would be triggered,
it would call bioKillThreads(). But call pthread_cancel() to cancel itself
would make it block. Also note that if SIGSEGV is caught by bio thread, it
should kill the main thread in order to give a positive report.
Rather than blindly evicting until maxmemory limit is achieved, this
update adds a time limit to eviction. While over the maxmemory limit,
eviction will process before each command AND as a timeProc when no
commands are running.
This will reduce the latency impact on many cases, especially pathological
cases like massive used memory increase during dict rehashing.
There is a risk that some other edge cases (like massive pipelined use
of MGET) could cause Redis memory usage to keep growing despite the
eviction attempts, so a new maxmemory-eviction-tenacity config is
introduced to let users mitigate that.
