- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit 663e637da87ee9385527fe3a37edb241a1f97cc6)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 1c35f8741baa0def2f87eeab17898c79f0147d11)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 6b53c630d92c8fbeb9bea0c406c9454fb68b8467)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit efc4189b6227a17f26ed9bd6bbac62bf4bf7ab66)
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
(cherry picked from commit fe8d6fe74920798c146a587810ee91ff049a9093)
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
(cherry picked from commit e37c16e42551a3a5c61e1f8a90cfc672d3e010e4)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
