this internal flag is there so that some commands do not comply to `--cluster-yes`
(cherry picked from commit f519dcb21626e5fd214960c7d83ee4fab7a3929d)
this internal flag is there so that some commands do not comply to `--cluster-yes`
(cherry picked from commit 1aa31e4da9a2daf9058dd923738e331bc5c91e31)
besides, hooks test was time sensitive. when the replica managed to
reconnect quickly after the client kill, the test would fail
(cherry picked from commit c5d85c69c75438f98f84e549877c2999a2e450a8)
besides, hooks test was time sensitive. when the replica managed to
reconnect quickly after the client kill, the test would fail
(cherry picked from commit f7e77759902aa19cfa537ed454e6bc987498e8c5)
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
(cherry picked from commit 8c03eb90da3951ed92d8d2729fc6d2ce4feb9e45)
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
(cherry picked from commit 63dae5232415d216dfc1acce8b5335e20aa3b178)
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
(cherry picked from commit 2afa308306fc641204f10a2bbe2fe35e28b6d259)
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
(cherry picked from commit c69a9b2f61e0747fabb8120f03c9e2a29b43b472)
Fix consistency test added in 0c9916d00 without considering TLS
redis-cli configuration.
(cherry picked from commit 675b00c7e0b7d68bafa11fcc7f66a394c3c3cd36)
Fix consistency test added in af5167b7f without considering TLS
redis-cli configuration.
(cherry picked from commit bedf1b21269dfb8afb584bc24585023af8b2a208)
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
(cherry picked from commit bc450c5f63d39d0f0b8c97fa91d15bb8d688b86d)
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
(cherry picked from commit 784ceeb90d84bbc49fc2f2e2e6c7b9fae2524bd5)
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
(cherry picked from commit 06aaeabaea9d9b248e8a790dde352cd14d66628a)
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
(cherry picked from commit 109b5ccdcd6e6b8cecdaeb13a246bc49ce7a61f4)
Adds an `optional` value to the previously boolean `tls-auth-clients` configuration keyword.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
(cherry picked from commit 198770751fdc4c46eb4971ead9b5787fd6ce39fd)
Adds an `optional` value to the previously boolean `tls-auth-clients` configuration keyword.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
(cherry picked from commit f31260b0445f5649449da41555e1272a40ae4af7)
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
(cherry picked from commit b76a93c362091daafd8a8d15a45d527b7437d013)
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
(cherry picked from commit c75512d89d1697cf782cdc826acffab5b6adc1c7)
on ci.redis.io the test fails a lot, reporting that bgsave didn't end.
increaseing the timeout we wait for that bgsave to get aborted.
in addition to that, i also verify that it indeed got aborted by
checking that the save counter wasn't reset.
add another test to verify that a successful bgsave indeed resets the
change counter.
(cherry picked from commit 49d4aebce0a0b94cd2b302d276be95d1a1ce8610)
on ci.redis.io the test fails a lot, reporting that bgsave didn't end.
increaseing the timeout we wait for that bgsave to get aborted.
in addition to that, i also verify that it indeed got aborted by
checking that the save counter wasn't reset.
add another test to verify that a successful bgsave indeed resets the
change counter.
(cherry picked from commit 8a57969fd75db01b881d438200911d95bdead293)
in cases where you have
test name {
start_server {
start_server {
assert
}
}
}
the exception will be thrown to the test proc, and the servers are
supposed to be killed on the way out. but it seems there was always a
bug of not cleaning the server stack, and recently (#7404) we started
relying on that stack in order to kill them, so with that bug sometimes
we would have tried to kill the same server twice, and leave one alive.
luckly, in most cases the pattern is:
start_server {
test name {
}
}
(cherry picked from commit bb170fa06e5909dd816b6530121952d57c8209a0)
in cases where you have
test name {
start_server {
start_server {
assert
}
}
}
the exception will be thrown to the test proc, and the servers are
supposed to be killed on the way out. but it seems there was always a
bug of not cleaning the server stack, and recently (#7404) we started
relying on that stack in order to kill them, so with that bug sometimes
we would have tried to kill the same server twice, and leave one alive.
luckly, in most cases the pattern is:
start_server {
test name {
}
}
(cherry picked from commit 36b949438547eb5bf8555fcac2c5040528fd7854)
This re-implements the redis-cli --pipe test so it no longer depends on a close feature available only in TCL 8.6.
Basically what this test does is run redis-cli --pipe, generates a bunch of commands and pipes them through redis-cli, and inspects the result in both Redis and the redis-cli output.
To do that, we need to close stdin for redis-cli to indicate we're done so it can flush its buffers and exit. TCL has bi-directional channels can only offers a way to "one-way close" a channel with TCL 8.6. To work around that, we now generate the commands into a file and feed that file to redis-cli directly.
As we're writing to an actual file, the number of commands is now reduced.
(cherry picked from commit dbc0a64843ccd07515ac41ca80497a9e5ffd107a)
This re-implements the redis-cli --pipe test so it no longer depends on a close feature available only in TCL 8.6.
Basically what this test does is run redis-cli --pipe, generates a bunch of commands and pipes them through redis-cli, and inspects the result in both Redis and the redis-cli output.
To do that, we need to close stdin for redis-cli to indicate we're done so it can flush its buffers and exit. TCL has bi-directional channels can only offers a way to "one-way close" a channel with TCL 8.6. To work around that, we now generate the commands into a file and feed that file to redis-cli directly.
As we're writing to an actual file, the number of commands is now reduced.
(cherry picked from commit f57e844b2edbb86a5df2f3436045814812c0a3ae)
