I suppose that it was overlooked, since till recently none of the blocked commands were readonly.
other changes:
- add test for the above.
- add better support for additional (and deferring) clients for
cluster tests
- improve a test which left the client in MULTI state.
track and report memory used by clients argv.
this is very usaful in case clients started sending a command and didn't
complete it. in which case the first args of the command are already
trimmed from the query buffer.
in an effort to avoid cache misses and overheads while keeping track of
these, i avoid calling sdsZmallocSize and instead use the sdslen /
bulk-len which can at least give some insight into the problem.
This memory is now added to the total clients memory usage, as well as
the client list.
Adding -D option for redis-cli to control newline between command
responses in raw mode.
Also removing cleanup code before calling exit, just in order
to avoid adding more adding more cleanup code (redis doesn't
bother to release allocations before exit anyway)
Co-authored-by: Oran Agra <oran@redislabs.com>
Add optional GET parameter to SET command in order to set a new value to
a key and retrieve the old key value. With this change we can deprecate
`GETSET` command and use only the SET command with the GET parameter.
This commit has two aspects:
1) improve memory reporting for all the places that use sdsAllocSize to compute
memory used by a string, in this case it'll include the internal fragmentation.
2) reduce the need for realloc calls by making the sds implicitly take over
the internal fragmentation of the block it allocated.
PROBLEM:
[$rd1 read] reads invalidation messages one by one, so it's never going to see the second invalidation message produced after INCR b, whether or not it exists. Adding another read will block incase no invalidation message is produced.
FIX:
We switch the order of "INCR a" and "INCR b" - now "INCR b" comes first. We still only read the first invalidation message produces. If an invalidation message is wrongly produces for b - then it will be produced before that of a, since "INCR b" comes before "INCR a".
Co-authored-by: Nitai Caro <caronita@amazon.com>
When REDISMODULE_EVENT_CLIENT_CHANGE events are delivered, modules may
want to mutate the client state (e.g. perform authentication).
This change links the module context with the real client rather than a
fake client for these events.
The client pointed to by the module context may in some cases be a fake
client. RM_Authenticate*() calls in this case would be ineffective but
appear to succeed, and this change fails them to make it easier to catch
such cases.
The tls-ca-cert or tls-ca-cert-dir configuration parameters are only
used when Redis needs to authenticate peer certificates, in one of these
scenarios:
1. Incoming clients or replicas, with `tls-auth-clients` enabled.
2. A replica authenticating the master's peer certificate.
3. Cluster nodes authenticating other nodes when establishing the bus
protocol connection.
- The argument `u` in for `ar` is ignored (and generates warnings since `D` became the default.
All it does is avoid updating unchanged objects (shouldn't have any impact on our build)
- Enable `LUA_USE_MKSTEMP` to force the use of `mkstemp()` instead of `tmpname()` (which is dead
code in redis anyway).
- Remove unused variable `c` in `f_parser()`
- Removed misleadingly indented space in `luaL_loadfile()` and ``addfield()`
Co-authored-by: Oran Agra <oran@redislabs.com>
when slaveof config is "no one", reset any pre-existing config and resume.
also solve a memory leak if slaveof appears twice.
and fail loading if port number is out of range or not an integer.
Co-authored-by: caozhengbin <caozb@yidingyun.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
We may access and modify these two variables in signal handler function,
to guarantee them async-signal-safe, so we should set them to volatile
sig_atomic_t type.
It doesn't look like this could have caused any real issue, and it seems that
signals are handled in main thread on most platforms. But we want to follow C
and POSIX standard in signal handler function.
Make sure we handle short writes correctly, sync to disk after writing and use
rename to make sure the replacement is actually atomic.
In any case of failure old configuration will remain in place.
Also, add some additional logging to make it easier to diagnose rewrite problems.
We should sync temp DB file before renaming as rdb_fsync_range does not use
flag `SYNC_FILE_RANGE_WAIT_AFTER`.
Refer to `Linux Programmer's Manual`:
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing any write.
When fclose would fail, the previous implementation would have attempted to do fclose again
this can in theory lead to segfault.
other changes:
check for non-zero return value as failure rather than a specific error code.
this doesn't fix a real bug, just a minor cleanup.
Before this commit, we would have continued to add replies to the reply buffer even if client
output buffer limit is reached, so the used memory would keep increasing over the configured limit.
What's more, we shouldn’t write any reply to the client if it is set 'CLIENT_CLOSE_ASAP' flag
because that doesn't conform to its definition and we will close all clients flagged with
'CLIENT_CLOSE_ASAP' in ‘beforeSleep’.
Because of code execution order, before this, we may firstly write to part of the replies to
the socket before disconnecting it, but in fact, we may can’t send the full replies to clients
since OS socket buffer is limited. But this unexpected behavior makes some commands work well,
for instance ACL DELUSER, if the client deletes the current user, we need to send reply to client
and close the connection, but before, we close the client firstly and write the reply to reply
buffer. secondly, we shouldn't do this despite the fact it works well in most cases.
We add a flag 'CLIENT_CLOSE_AFTER_COMMAND' to mark clients, this flag means we will close the
client after executing commands and send all entire replies, so that we can write replies to
reply buffer during executing commands, send replies to clients, and close them later.
We also fix some implicit problems. If client output buffer limit is enforced in 'multi/exec',
all commands will be executed completely in redis and clients will not read any reply instead of
partial replies. Even more, if the client executes 'ACL deluser' the using user in 'multi/exec',
it will not read the replies after 'ACL deluser' just like before executing 'client kill' itself
in 'multi/exec'.
We added some tests for output buffer limit breach during multi-exec and using a pipeline of
many small commands rather than one with big response.
Co-authored-by: Oran Agra <oran@redislabs.com>
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
This happens only on diskless replicas when attempting to reconnect after
failing to load an RDB file. It is more likely to occur with larger datasets.
After reconnection is initiated, replicationEmptyDbCallback() may get called
and try to write to an unconnected socket. This triggered another issue where
the connection is put into an error state and the connect handler never gets
called. The problem is a regression introduced by commit cad93ed.
When all replicas waiting for a bgsave get disconnected (possibly due to output buffer limit),
It may be good to kill the bgsave child. in diskless replication it already happens, but in
disk-based, the child may still serve some purpose (for persistence).
By killing the child, we prevent it from eating COW memory in vain, and we also allow a new child fork sooner for the next full synchronization or bgsave.
We do that only if rdb persistence wasn't enabled in the configuration.
Btw, now, rdbRemoveTempFile in killRDBChild won't block server, so we can killRDBChild safely.
This commit adds streamIteratorStop call in rewriteStreamObject function in some of the return statement. Although currently this will not cause memory leak since stream id is only 16 bytes long.
Change `val` to `unsigned char` before being tested.
The fix is identical to the one that's been made in upstream jemalloc.
warning is:
src/malloc_io.c: In function ‘malloc_vsnprintf’:
src/malloc_io.c:369:2: warning: case label value exceeds maximum value for type
369 | case '?' | 0x80: \
| ^~~~
src/malloc_io.c:581:5: note: in expansion of macro ‘GET_ARG_NUMERIC’
581 | GET_ARG_NUMERIC(val, 'p');
| ^~~~~~~~~~~~~~~
Refine comment of makeThreadKillable().
This commit can be backported to 5.0, only if we also backport cf8a6e3.
Co-authored-by: Oran Agra <oran@redislabs.com>
6918ebc introudced a makefile script that detects if the toolchain
supports c11, and it looked that it was passing on MacOS and fails on
Ubuntu, looks like Ubuntu's Dash was spawning a background process,
deleted foo.c before gcc tried to compile it.
