in case the rdb child failed, crashed or terminated unexpectedly redis
would have marked the replica clients with repl_put_online_on_ack and
then kill them only after a minute when no ack was received.
it would not stream anything to these connections, so the only effect of
this bug is a delay of 1 minute in the replicas attempt to re-connect.
(cherry picked from commit a176cb56a3c0235adddde33fcbaee2369a5af73e)
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
(cherry picked from commit 24b6f62741483f3f695838c0ad091f1931c36df5)
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
(cherry picked from commit 8128d39737adaf7092c9a367f71fbe9e0a2b33a2)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit 663e637da87ee9385527fe3a37edb241a1f97cc6)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit e5227aab899628653285478a9d1083e8e8f51b57)
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
(cherry picked from commit 3351549c22434337dfa8a262dce678679a35d7da)
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
(cherry picked from commit 02ef355f98691adba4126bbdab0d4d2bfe475701)
* update daily CI to include cluster and sentinel tests
* update daily CI to run when creating a new release
* update release scripts to work on the new redis.io hosts
(cherry picked from commit 2ee300481f3250760ba0ef4253438f6282cf9596)
* update daily CI to include cluster and sentinel tests
* update daily CI to run when creating a new release
* update release scripts to work on the new redis.io hosts
(cherry picked from commit 7f19a04f0f049720ff5f84f3ab1aa81014f2f4ed)
* fix description about ZIP_BIG_PREVLEN(the code is ok), it's similar to
antirez#4705
* fix description about ziplist entry encoding field (the code is ok),
the max length should be 2^32 - 1 when encoding is 5 bytes
(cherry picked from commit c05d8a0a31286688249de14e42c5a69b553563db)
* fix description about ZIP_BIG_PREVLEN(the code is ok), it's similar to
antirez#4705
* fix description about ziplist entry encoding field (the code is ok),
the max length should be 2^32 - 1 when encoding is 5 bytes
(cherry picked from commit 67660881ed5b19a979425c37b3e8beea3349043c)
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
(cherry picked from commit 99b920534f7710d544c38b870fd10c6053283d99)
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
(cherry picked from commit d9f970d8d3f0b694f1e8915cab6d4eab9cfb2ef1)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 1c35f8741baa0def2f87eeab17898c79f0147d11)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 5977a94842a25140520297fe4bfda15e0e4de711)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 6b53c630d92c8fbeb9bea0c406c9454fb68b8467)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 909bc97c526db757a3d022b29911ff6d08eba59c)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit efc4189b6227a17f26ed9bd6bbac62bf4bf7ab66)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit 8e76e13472b7d277af78691775c2cf845f68ab90)
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
(cherry picked from commit 8d4f055e43ab554adfce617c971f10c4b6423484)
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
(cherry picked from commit 69ade87325eedebdb44760af9a8c28e15381888e)
For example:
BITOP not targetkey sourcekey
If targetkey and sourcekey doesn't exist, BITOP has no effect,
we do not propagate it, thus can save aof and replica flow.
(cherry picked from commit 2cf11ce5ca6804df9ff65bc90dbd1dfc5e2e497c)
