Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
(cherry picked from commit 05a086617dc52d07868604e1a0fa922e5b9ce67c)
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
(cherry picked from commit 9824fe3e392caa04dc1b4071886e9ac402dd6d95)
The tests sometimes fail to find a log message.
Recently i added a print that shows the log files that are searched
and it shows that the message was in deed there.
The only reason i can't think of for this seach to fail, is we we
happened to read an incomplete line, which didn't match our pattern and
then on the next iteration we would continue reading from the line after
it.
The fix is to always re-evaluation the previous line.
(cherry picked from commit 35eb8ec6f3f6a2deab49ff70b0e9a8587adfd6de)
The tests sometimes fail to find a log message.
Recently i added a print that shows the log files that are searched
and it shows that the message was in deed there.
The only reason i can't think of for this seach to fail, is we we
happened to read an incomplete line, which didn't match our pattern and
then on the next iteration we would continue reading from the line after
it.
The fix is to always re-evaluation the previous line.
(cherry picked from commit 4e2e5be201439cae4c0a03cfc8b6a60be4bff625)
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
(cherry picked from commit 51f36283df29e6969215baf63223653d7cec0059)
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
(cherry picked from commit e05a7df7f942a2e17dee3e0e3d67d80e8d1d2e6e)
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
(cherry picked from commit f61435fe8b7907f59cb0f11f28f13db50b9023a5)
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
(cherry picked from commit 0f370f9b667fab4bede084f1b8b47c93f0d56069)
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 3b031b1 (invalidate watch on expire on access) was released in 6.0 RC2
and 62a3ec8 released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
(cherry picked from commit 44bcbed2eed8577e7634e04817c4a75f9b722a62)
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
(cherry picked from commit 556acefe7556443b6d1741d804add92047bf4a8b)
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 128bc0f4951e3c887a0cbe16360adb04fdeeda82)
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 6cf23d6610677d38e4892e02649fc2de7095274b)
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
(cherry picked from commit ee8cb472a781e42ec7b10c6a88d258a3399ca34f)
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
(cherry picked from commit 04a0af9085ed91eace8af94f71a07b651a1af454)
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
(cherry picked from commit 0de424cab96633a3fc94bcdaec83176eacb080b2)
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
(cherry picked from commit 457b7073b5d512c10aaeeb0dbf1763f0cb10462c)
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
(cherry picked from commit c7fe6387d92b266581ff313ab6a3b39443747b87)
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
(cherry picked from commit 19418b6b28b70818e67c50bbdfad8568da7c3458)
If we fail or stop to rewrite aof, we need to remove temporary aof.
We also remove temporary rdb when replicas abort to receive rdb.
But currently we delete them in main thread, to avoid blocking,
we should use bg_unlink to remove them in a background thread.
Btw, we have already used this way to removed child process temporary rdb.
(cherry picked from commit 5bb220660e6b548daee2a68c81d3e7f4b35e1fcc)
If we fail or stop to rewrite aof, we need to remove temporary aof.
We also remove temporary rdb when replicas abort to receive rdb.
But currently we delete them in main thread, to avoid blocking,
we should use bg_unlink to remove them in a background thread.
Btw, we have already used this way to removed child process temporary rdb.
(cherry picked from commit aaacb8c955779a76faaa15b7097eef4787a4339f)
- Clarify some documentation comments
- Make sure blocked-on-keys client privdata is accessible
from withing the timeout callback
- Handle blocked clients in beforeSleep - In case a key
becomes "ready" outside of processCommand
See #7879#7880
(cherry picked from commit c816eec8938297e827b0ddd19f9011847bab05c3)
- Clarify some documentation comments
- Make sure blocked-on-keys client privdata is accessible
from withing the timeout callback
- Handle blocked clients in beforeSleep - In case a key
becomes "ready" outside of processCommand
See #7879#7880
(cherry picked from commit addf47dcacec596eb7f6e1500846331d3e13fff4)
