* Debug Populate: Add checks for count and keysize to avoid crash
* provide getRangeLongFromObjectOrReply and getPositiveLongFromObjectOrReply for range check
Expose new `loading_rdb_used_mem` showing the used memory of the server
that saved the RDB file we're currently using.
This is useful in diskless replication when the total size of the rdb is
unkown, and can be used as a rought estimation of progres.
Use that new field to calculate the "user friendly"
`loading_loaded_perc` and `loading_eta_seconds`.
Expose `master_sync_total_bytes` and `master_sync_total_bytes` to complement
on the existing `master_sync_total_bytes` (which cannot be used on its own
to calculate progress).
Add "user friendly" field for `master_sync_perc`
Perform full reset of all client connection states, is if the client was
disconnected and re-connected. This affects:
* MULTI state
* Watched keys
* MONITOR mode
* Pub/Sub subscription
* ACL/Authenticated state
* Client tracking state
* Cluster read-only/asking state
* RESP version (reset to 2)
* Selected database
* CLIENT REPLY state
The response is +RESET to make it easily distinguishable from other
responses.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Not disabling save, slower systems begun background save that did not
complete in time, resulting with SAVE failing with "ERR Background save
already in progress".
- rdbSaveSingleModuleAux() used RedisModuleIO's "bytes" field for
tracking written bytes before calling moduleInitIOContext() which sets
"bytes" to zero
- rdbSaveObject() re-initialized RedisModuleIO too late
This return value is not used at the moment since it's only tested
against -1, and the actual byte count isn't used yet.
Co-authored-by: Tomasz Poradowski <tomasz.poradowski@generiscorp.com>
This will allow to use: RedisModule_CreateStringPrintf(ctx, "%s %c %s", "string1", 0, "string2");
On large string, the previous code would incrementally retry to double the output buffer.
now it uses the the return value of snprintf and grows to the right size in one step.
and also avoids an excessive strlen in sdscat at the end.
Make it possible for redis-cli cluster import to work with source and
target that require AUTH.
Adding two different flags --cluster-from-user, --cluster-from-pass
and --cluster-askpass for source node authentication.
Also for target authentication, using existing --user and --pass flag.
Example:
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --pass 1234 --user default --cluster-from-user default --cluster-from-pass 123456
./redis-cli --cluster import 127.0.0.1:7000 --cluster-from 127.0.0.1:6379 --askpass --cluster-from-user default --cluster-from-askpass
Few config settings are also reflected by the INFO command.
these are mainly ones that are important for either an instant view of
the server status (to compare a metric to it's limit config),
Important configurations that are necessary in the crash log (which
currently doesn't print the config),
And things that are important for monitoring solutions (such as
Prometheus), which rely on INFO to collect their data.
Add cluster_connections to INFO CLUSTER:
This makes it possible to be combined together with connected_clients
and connected_slaves and be matched against maxclients
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
The reason that we want to get a full crash report on SIGABRT
is that the jmalloc, when detecting a corruption, calls abort().
This will cause the Redis to exist silently without any report
and without any way to analyze what happened.
The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
Useful when you want to know through which bind address the client connected to
the server in case of multiple bind addresses.
- Adding `laddr` field to CLIENT list showing the local (bind) address.
- Adding `LADDR` option to CLIENT KILL to kill all the clients connected
to a specific local address.
- Refactoring to share code.
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
(cherry picked from commit 9824fe3e392caa04dc1b4071886e9ac402dd6d95)
The tests sometimes fail to find a log message.
Recently i added a print that shows the log files that are searched
and it shows that the message was in deed there.
The only reason i can't think of for this seach to fail, is we we
happened to read an incomplete line, which didn't match our pattern and
then on the next iteration we would continue reading from the line after
it.
The fix is to always re-evaluation the previous line.
(cherry picked from commit 4e2e5be201439cae4c0a03cfc8b6a60be4bff625)
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
(cherry picked from commit e05a7df7f942a2e17dee3e0e3d67d80e8d1d2e6e)
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
(cherry picked from commit 0f370f9b667fab4bede084f1b8b47c93f0d56069)
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
(cherry picked from commit 556acefe7556443b6d1741d804add92047bf4a8b)
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 6cf23d6610677d38e4892e02649fc2de7095274b)
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
(cherry picked from commit 04a0af9085ed91eace8af94f71a07b651a1af454)
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
(cherry picked from commit 457b7073b5d512c10aaeeb0dbf1763f0cb10462c)
