da723a917 added a file for stderr to keep valgrind log but i forgot to
add a similar thing when valgrind isn't being used.
the result is that `glob */err.txt` fails.
Starting redis 6.0 and the changes we made to the diskless master to be
suitable for TLS, I made the master avoid reaping (wait3) the pid of the
child until we know all replicas are done reading their rdb.
I did that in order to avoid a state where the rdb_child_pid is -1 but
we don't yet want to start another fork (still busy serving that data to
replicas).
It turns out that the solution used so far was problematic in case the
fork child was being killed (e.g. by the kernel OOM killer), in that
case there's a chance that we currently disabled the read event on the
rdb pipe, since we're waiting for a replica to become writable again.
and in that scenario the master would have never realized the child
exited, and the replica will remain hung too.
Note that there's no mechanism to detect a hung replica while it's in
rdb transfer state.
The solution here is to add another pipe which is used by the parent to
tell the child it is safe to exit. this mean that when the child exits,
for whatever reason, it is safe to reap it.
Besides that, i'm re-introducing an adjustment to REPLCONF ACK which was
part of #6271 (Accelerate diskless master connections) but was dropped
when that PR was rebased after the TLS fork/pipe changes (6fd5ff8).
Now that RdbPipeCleanup no longer calls checkChildrenDone, and the ACK
has chance to detect that the child exited, it should be the one to call
it so that we don't have to wait for cron (server.hz) to do that.
- redirect valgrind reports to a dedicated file rather than console
- try to avoid killing instances with SIGKILL so that we get the memory
leak report (killing with SIGTERM before resorting to SIGKILL)
- search for valgrind reports when done, print them and fail the tests
- add --dont-clean option to keep the logs on exit
- fix exit error code when crash is found (would have exited with 0)
changes that affect the normal redis test suite:
- refactor check_valgrind_errors into two functions one to search and
one to report
- move the search half into util.tcl to serve the cluster tests too
- ignore "address range perms" valgrind warnings which seem non relevant.
in some cases a command that returns an error possibly due to a timing
issue causes the tcl code to crash and thus prevents the rest of the
tests from running. this adds an option to make the test proceed despite
the crash.
maybe it should be the default mode some day.
- skip full units
- skip a single test (not just a list of tests)
- when skipping tag, skip spinning up servers, not just the tests
- skip tags when running against an external server too
- allow using multiple tags (split them)
Fix issues with writeConn() which resulted with corruption of the stream by leaving an extra byte in the buffer. The trigger for this is partial writes or write errors which were not experienced on Linux but reported on macOS.
1. default value of always-show-logo was not consistent with the default in the code
2. comment about cluster-replica-no-failover is wrong since we can only do manually failover upon replicas
3. improve description about always-show-logo
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
DEBUG ZIPLIST <key> currently returns the following error string if the
key is not a ziplist: "ERR Not an sds encoded string.". This looks like
an accidental copy/paste error from the error returned in the else if
branch above where this string is returned if the key is not an sds
string. The command was added in
f898429fe149f476d61270ed4299dd1f8f75ae50 and looking at the commit,
nothing indicates that it is not an accidental typo.
The error string now returns a correct error: "Not a ziplist encoded
object", which accurately describes the error.
This fixes the issue described in CVE-2014-5461. At this time we cannot
confirm that the original issue has a real impact on Redis, but it is
included as an extra safety measure.
The previous algorithm is of O(n^2) time complexity.
It would have run through the ziplist entries one by one, each time doing a `realloc` and a
`memmove` (moving the entire tail of the ziplist).
The new algorithm is O(n), it runs over all the records once, computing the size of the `realloc`
needed, then does one `realloc`, and run thought the records again doing many smaller `memmove`s,
each time moving just one record.
So this change reduces many reallocs, and moves each record just once.
Co-authored-by: zhumaohua <zhumaohua@megvii.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Update adds a general source for retrieving a monotonic time.
In addition, AE has been updated to utilize the new monotonic
clock for timer processing.
This performance improvement is **not** enabled in a default build due to various H/W compatibility
concerns, see README.md for details. It does however change the default use of gettimeofday with
clock_gettime and somewhat improves performance.
This update provides the following
1. An interface for retrieving a monotonic clock. getMonotonicUs returns a uint64_t (aka monotime)
with the number of micro-seconds from an arbitrary point. No more messing with tv_sec/tv_usec.
Simple routines are provided for measuring elapsed milli-seconds or elapsed micro-seconds (the
most common use case for a monotonic timer). No worries about time moving backwards.
2. High-speed assembler implementation for x86 and ARM. The standard method for retrieving the
monotonic clock is POSIX.1b (1993): clock_gettime(CLOCK_MONOTONIC, timespec*). However, most
modern processors provide a constant speed instruction clock which can be retrieved in a fraction
of the time that it takes to call clock_gettime. For x86, this is provided by the RDTSC
instruction. For ARM, this is provided by the CNTVCT_EL0 instruction. As a compile-time option,
these high-speed timers can be chosen. (Default is POSIX clock_gettime.)
3. Refactor of event loop timers. The timer processing in ae.c has been refactored to use the new
monotonic clock interface. This results in simpler/cleaner logic and improved performance.
fe8d6fe74 (released in 6.0.6) has a side effect, when processCommand
rejects a command with pre-made shared object error string, it trims the
newlines from the end of the string. if that string is later used with
addReply, the newline will be missing, breaking the protocol, and
leaving the client hung.
It seems that the only scenario which this happens is when replying with
-LOADING to some command, and later using that reply from the CONFIG
SET command (still during loading). this will result in hung client.
Refactoring the code in order to avoid trimming these newlines from
shared string objects, and do the newline trimming only in other cases
where it's needed.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
During a long AOF or RDB loading, the memory stats were not updated, and
INFO would return stale data, specifically about fragmentation and RSS.
In the past some of these were sampled directly inside the INFO command,
but were moved to cron as an optimization.
This commit introduces a concept of loadingCron which should take
some of the responsibilities of serverCron.
It attempts to limit it's rate to approximately the server Hz, but may
not be very accurate.
In order to avoid too many system call, we use the cached ustime, and
also make sure to update it in both AOF loading and RDB loading inside
processEventsWhileBlocked (it seems AOF loading was missing it).
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
A first step to enable a consistent full percentile analysis on query latency so that we can fully understand the performance and stability characteristics of the redis-server system we are measuring. It also improves the instantaneous reported metrics, and the csv output format.
Otherwise, it is treated as a single allocation and freed synchronously. The following logic is used for estimating the effort in constant-ish time complexity:
1. Check the number of nodes.
1. Add an allocation for each consumer group registered inside the stream.
1. Check the number of PELs in the first CG, and then add this count times the number of CGs.
1. Check the number of consumers in the first CG, and then add this count times the number of CGs.
The previous fix using _Atomic was insufficient, since we check and set it in
different places.
The implications of this bug are just that a portion of the bug report will be shown
twice, in the race case of two concurrent crashes.
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
After fork, the child process(redis-aof-rewrite) will get the fd opened
by the parent process(redis), when redis killed by kill -9, it will not
graceful exit(call prepareForShutdown()), so redis-aof-rewrite thread may still
alive, the fd(lock) will still be held by redis-aof-rewrite thread, and
redis restart will fail to get lock, means fail to start.
This issue was causing failures in the cluster tests in github actions.
Co-authored-by: Oran Agra <oran@redislabs.com>
Since users often post just the crash log in github issues, the log
print that's above it is missing.
No reason not to include the size in the panic message itself.
fe8d6fe749 added rejectCommand which takes an robj reply and passes it
through addReplyErrorSafe to addReplyErrorLength.
The robj contains newline at it's end, but addReplyErrorSafe converts it
to spaces, and passes it to addReplyErrorLength which adds the protocol
newlines.
The result was that most error replies (like OOM) had extra two trailing
spaces in them.
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
This resolves an issue with sentinel that was created when hiredis was recently updated.
this was due to sds symbol names clashing, since hiredis now includes different implementation
of sdsrange than the one in redis.
The state of things is that redis-benchamrk and redis-cli include only hiredis sds implementation.
redis-cli even operates (calls sdscatlen) on sds that's allocated by hiredis.
Sentinel however has both implementations of the sds library in it (now each with it's own unique
symbols).
