Previously we used zunionInterGetKeys(), however after this function was
fixed to account for the destination key (not needed when the API was
designed for "diskstore") the two set of commands can no longer be served
by an unique keys-extraction function.
This API originated from the "diskstore" experiment, not for Redis
Cluster itself, so there were legacy/useless things trying to
differentiate between keys that are going to be overwritten and keys
that need to be fetched from disk (preloaded).
All useless with Cluster, so removed with the result of code
simplification.
server.unixtime and server.mstime are cached less precise timestamps
that we use every time we don't need an accurate time representation and
a syscall would be too slow for the number of calls we require.
Such an example is the initialization and update process of the last
interaction time with the client, that is used for timeouts.
However rdbLoad() can take some time to load the DB, but at the same
time it did not updated the time during DB loading. This resulted in the
bug described in issue #1535, where in the replication process the slave
loads the DB, creates the redisClient representation of its master, but
the timestamp is so old that the master, under certain conditions, is
sensed as already "timed out".
Thanks to @yoav-steinberg and Redis Labs Inc for the bug report and
analysis.
A system similar to the RDB write error handling is used, in which when
we can't write to the AOF file, writes are no longer accepted until we
are able to write again.
For fsync == always we still abort on errors since there is currently no
easy way to avoid replying with success to the user otherwise, and this
would violate the contract with the user of only acknowledging data
already secured on disk.
The API is one of the bulding blocks of CLUSTER FAILOVER command that
executes a manual failover in Redis Cluster. However exposed as a
command that the user can call directly, it makes much simpler to
upgrade a standalone Redis instance using a slave in a safer way.
The commands works like that:
CLIENT PAUSE <milliesconds>
All the clients that are not slaves and not in MONITOR state are paused
for the specified number of milliesconds. This means that slaves are
normally served in the meantime.
At the end of the specified amount of time all the clients are unblocked
and will continue operations normally. This command has no effects on
the population of the slow log, since clients are not blocked in the
middle of operations but only when there is to process new data.
Note that while the clients are unblocked, still new commands are
accepted and queued in the client buffer, so clients will likely not
block while writing to the server while the pause is active.
server.lua_time_start is expressed in milliseconds. Use mstime_t instead
of long long, and populate it with mstime() instead of ustime()/1000.
Functionally identical but more natural.
In high RPS environments, the default listen backlog is not sufficient, so
giving users the power to configure it is the right approach, especially
since it requires only minor modifications to the code.
Return the number of slaves for the same master having a better
replication offset of the current slave, that is, the slave "rank" used
to pick a delay before the request for election.
A client can enter a special cluster read-only mode using the READONLY
command: if the client read from a slave instance after this command,
for slots that are actually served by the instance's master, the queries
will be processed without redirection, allowing clients to read from
slaves (but without any kind fo read-after-write guarantee).
The READWRITE command can be used in order to exit the readonly state.
Masters not understanding REPLCONF ACK will reply with errors to our
requests causing a number of possible issues.
This commit detects a global replication offest set to -1 at the end of
the replication, and marks the client representing the master with the
REDIS_PRE_PSYNC flag.
Note that this flag was called REDIS_PRE_PSYNC_SLAVE but now it is just
REDIS_PRE_PSYNC as it is used for both slaves and masters starting with
this commit.
This commit fixes issue #1488.
The previous fix for false positive timeout detected by master was not
complete. There is another blocking stage while loading data for the
first synchronization with the master, that is, flushing away the
current data from the DB memory.
This commit uses the newly introduced dict.c callback in order to make
some incremental work (to send "\n" heartbeats to the master) while
flushing the old data from memory.
It is hard to write a regression test for this issue unfortunately. More
support for debugging in the Redis core would be needed in terms of
functionalities to simulate a slow DB loading / deletion.
Redis hash table implementation has many non-blocking features like
incremental rehashing, however while deleting a large hash table there
was no way to have a callback called to do some incremental work.
This commit adds this support, as an optiona callback argument to
dictEmpty() that is currently called at a fixed interval (one time every
65k deletions).
The previous implementation of SCAN parsed the cursor in the generic
function implementing SCAN, SSCAN, HSCAN and ZSCAN.
The actual higher-level command implementation only checked for empty
keys and return ASAP in that case. The result was that inverting the
arguments of, for instance, SSCAN for example and write:
SSCAN 0 key
Instead of
SSCAN key 0
Resulted into no error, since 0 is a non-existing key name very likely.
Just the iterator returned no elements at all.
In order to fix this issue the code was refactored to extract the
function to parse the cursor and return the error. Every higher level
command implementation now parses the cursor and later checks if the key
exist or not.
All the internal state of cluster involving time is now using mstime_t
and mstime() in order to use milliseconds resolution.
Also the clusterCron() function is called with a 10 hz frequency instead
of 1 hz.
The cluster node_timeout must be also configured in milliseconds by the
user in redis.conf.
The new API is able to remember operations to perform before returning
to the event loop, such as checking if there is the failover quorum for
a slave, save and fsync the configuraiton file, and so forth.
Because this operations are performed before returning on the event
loop we are sure that messages that are sent in the same event loop run
will be delivered *after* the configuration is already saved, that is a
requirement sometimes. For instance we want to publish a new epoch only
when it is already stored in nodes.conf in order to avoid returning back
in the logical clock when a node is restarted.
This new API provides a big performance advantage compared to saving and
possibly fsyncing the configuration file multiple times in the same
event loop run, especially in the case of big clusters with tens or
hundreds of nodes.
The new algorithm does not check replies time as checking for the
currentEpoch in the reply ensures that the reply is about the current
election process.
The time is sent in requests, and copied back in reply packets.
This way the receiver can compare the time field in a reply with its
local clock and check the age of the request associated with this reply.
This is an easy way to discard delayed replies. Note that only a clock
is used here, that is the one of the node sending the packet. The
receiver only copies the field back into the reply, so no
synchronization is needed between clocks of different hosts.
Handshake nodes should turn into normal nodes or be freed in a
reasonable amount of time, otherwise they'll keep accumulating if the
address they are associated with is not reachable for some reason.
During the replication full resynchronization process, the RDB file is
transfered from the master to the slave. However there is a short
preamble to send, that is currently just the bulk payload length of the
file in the usual Redis form $..length..<CR><LF>.
This preamble used to be sent with a direct write call, assuming that
there was alway room in the socket output buffer to hold the few bytes
needed, however this does not scale in case we'll need to send more
stuff, and is not very robust code in general.
This commit introduces a more general mechanism to send a preamble up to
2GB in size (the max length of an sds string) in a non blocking way.
Example:
db0:keys=221913,expires=221913,avg_ttl=655
The algorithm uses a running average with only two samples (current and
previous). Keys found to be expired are considered at TTL zero even if
the actual TTL can be negative.
The TTL is reported in milliseconds.
The main idea here is that when we are no longer to expire keys at the
rate the are created, we can't block more in the normal expire cycle as
this would result in too big latency spikes.
For this reason the commit introduces a "fast" expire cycle that does
not run for more than 1 millisecond but is called in the beforeSleep()
hook of the event loop, so much more often, and with a frequency bound
to the frequency of executed commnads.
The fast expire cycle is only called when the standard expiration
algorithm runs out of time, that is, consumed more than
REDIS_EXPIRELOOKUPS_TIME_PERC of CPU in a given cycle without being able
to take the number of already expired keys that are yet not collected
to a number smaller than 25% of the number of keys.
You can test this commit with different loads, but a simple way is to
use the following:
Extreme load with pipelining:
redis-benchmark -r 100000000 -n 100000000 \
-P 32 set ele:rand:000000000000 foo ex 2
Remove the -P32 in order to avoid the pipelining for a more real-world
load.
In another terminal tab you can monitor the Redis behavior with:
redis-cli -i 0.1 -r -1 info keyspace
and
redis-cli --latency-history
Note: this commit will make Redis printing a lot of debug messages, it
is not a good idea to use it in production.
Previously two string encodings were used for string objects:
1) REDIS_ENCODING_RAW: a string object with obj->ptr pointing to an sds
stirng.
2) REDIS_ENCODING_INT: a string object where the obj->ptr void pointer
is casted to a long.
This commit introduces a experimental new encoding called
REDIS_ENCODING_EMBSTR that implements an object represented by an sds
string that is not modifiable but allocated in the same memory chunk as
the robj structure itself.
The chunk looks like the following:
+--------------+-----------+------------+--------+----+
| robj data... | robj->ptr | sds header | string | \0 |
+--------------+-----+-----+------------+--------+----+
| ^
+-----------------------+
The robj->ptr points to the contiguous sds string data, so the object
can be manipulated with the same functions used to manipulate plan
string objects, however we need just on malloc and one free in order to
allocate or release this kind of objects. Moreover it has better cache
locality.
This new allocation strategy should benefit both the memory usage and
the performances. A performance gain between 60 and 70% was observed
during micro-benchmarks, however there is more work to do to evaluate
the performance impact and the memory usage behavior.
