Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
this code is in use only if the master is disk-based, and the replica is
diskless. In this case we use a buffered reader, but we must avoid reading
past the rdb file, into the command stream. which Luckly rdb.c doesn't
really attempt to do (it knows how much it should read).
When rioConnRead detects that the extra buffering attempt reaches beyond
the read limit it should read less, but if the caller actually requested
more, then it should return with an error rather than a short read. the
bug would have resulted in short read.
in order to fix it, the code must consider the real requested size, and
not the extra buffering size.
this code is in use only if the master is disk-based, and the replica is
diskless. In this case we use a buffered reader, but we must avoid reading
past the rdb file, into the command stream. which Luckly rdb.c doesn't
really attempt to do (it knows how much it should read).
When rioConnRead detects that the extra buffering attempt reaches beyond
the read limit it should read less, but if the caller actually requested
more, then it should return with an error rather than a short read. the
bug would have resulted in short read.
in order to fix it, the code must consider the real requested size, and
not the extra buffering size.
Before that PR, processCommand() did not notice that cmd could be a module
command in which case getkeys_proc member has a different meaning.
The outcome was that a module command which doesn't take any key names in its
arguments (similar to SLOWLOG) would be handled as if it might have key name arguments
(similar to MEMORY), would consider cluster redirect but will end up with 0 keys
after an excessive call to getKeysFromCommand, and eventually do the right thing.
Before that PR, processCommand() did not notice that cmd could be a module
command in which case getkeys_proc member has a different meaning.
The outcome was that a module command which doesn't take any key names in its
arguments (similar to SLOWLOG) would be handled as if it might have key name arguments
(similar to MEMORY), would consider cluster redirect but will end up with 0 keys
after an excessive call to getKeysFromCommand, and eventually do the right thing.
Since the dynamic allocations in raxIterator are only used for deep walks, memory
leak due to missing call to raxStop can only happen for rax with key names longer
than 32 bytes.
Out of all the missing calls, the only ones that may lead to a leak are the rax
for consumer groups and consumers, and these were only in AOFRW and rdbSave, which
normally only happen in fork or at shutdown.
Since the dynamic allocations in raxIterator are only used for deep walks, memory
leak due to missing call to raxStop can only happen for rax with key names longer
than 32 bytes.
Out of all the missing calls, the only ones that may lead to a leak are the rax
for consumer groups and consumers, and these were only in AOFRW and rdbSave, which
normally only happen in fork or at shutdown.
Specifically, the key passed to the module aof_rewrite callback is a stack allocated robj. When passing it to RedisModule_EmitAOF (with appropriate "s" fmt string) redis used to panic when trying to inc the ref count of the stack allocated robj. Now support such robjs by coying them to a new heap robj. This doesn't affect performance because using the alternative "c" or "b" format strings also copies the input to a new heap robj.
(cherry picked from commit 8a2b0472a78c09398e4416c06b7c5f343348f96b)
Specifically, the key passed to the module aof_rewrite callback is a stack allocated robj. When passing it to RedisModule_EmitAOF (with appropriate "s" fmt string) redis used to panic when trying to inc the ref count of the stack allocated robj. Now support such robjs by coying them to a new heap robj. This doesn't affect performance because using the alternative "c" or "b" format strings also copies the input to a new heap robj.
(cherry picked from commit d484b8a04ed67e79030fcb060e88641acb6e4f98)
