This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
Makes spt_init more careful with assumptions about what memory regions
may be overwritten. It will now only consider a contiguous block of argv
and envp elements and mind any gaps.
Makes spt_init more careful with assumptions about what memory regions
may be overwritten. It will now only consider a contiguous block of argv
and envp elements and mind any gaps.
when the same consumer re-claim an entry that it already has, there's
no need to remove-and-insert if it's the same rax.
we do need to update the idle time though.
this commit only improves efficiency (doesn't change behavior).
when the same consumer re-claim an entry that it already has, there's
no need to remove-and-insert if it's the same rax.
we do need to update the idle time though.
this commit only improves efficiency (doesn't change behavior).
* Add CLIENT INFO subcommand.
The output is identical to CLIENT LIST but provides a single line for
the current client only.
* Add CLIENT LIST ID [id...].
Co-authored-by: Itamar Haber <itamar@redislabs.com>
* Add CLIENT INFO subcommand.
The output is identical to CLIENT LIST but provides a single line for
the current client only.
* Add CLIENT LIST ID [id...].
Co-authored-by: Itamar Haber <itamar@redislabs.com>
First, if the ziplist header is surely inside the ziplist, do fast path
decoding rather than the careful one.
In that case, streamline the encoding if-else chain to be executed only
once, and the encoding validity tested at the end.
encourage inlining
likely / unlikely hints for speculative execution
Assertion used _exit(1) to tell the compiler that the code after them is
not reachable and get rid of warnings.
But in some cases assertions are placed inside tight loops, and any
piece of code in them can slow down execution (code cache and other
reasons), instead using either abort() or better yet, unreachable
builtin.
First, if the ziplist header is surely inside the ziplist, do fast path
decoding rather than the careful one.
In that case, streamline the encoding if-else chain to be executed only
once, and the encoding validity tested at the end.
encourage inlining
likely / unlikely hints for speculative execution
Assertion used _exit(1) to tell the compiler that the code after them is
not reachable and get rid of warnings.
But in some cases assertions are placed inside tight loops, and any
piece of code in them can slow down execution (code cache and other
reasons), instead using either abort() or better yet, unreachable
builtin.
If RESTORE passes successfully with full sanitization, we can't affort
to crash later on assertion due to duplicate records in a hash when
converting it form ziplist to dict.
This means that when doing full sanitization, we must make sure there
are no duplicate records in any of the collections.
If RESTORE passes successfully with full sanitization, we can't affort
to crash later on assertion due to duplicate records in a hash when
converting it form ziplist to dict.
This means that when doing full sanitization, we must make sure there
are no duplicate records in any of the collections.
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
When client tracking is enabled signalModifiedKey can increase memory usage,
this can cause the loop in performEvictions to keep running since it was measuring
the memory usage impact of signalModifiedKey.
The section that measures the memory impact of the eviction should be just on dbDelete,
excluding keyspace notification, client tracking, and propagation to AOF and replicas.
This resolves part of the problem described in #8069
p.s. fix took 1 minute, test took about 3 hours to write.
