Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
on ci.redis.io the test fails a lot, reporting that bgsave didn't end.
increaseing the timeout we wait for that bgsave to get aborted.
in addition to that, i also verify that it indeed got aborted by
checking that the save counter wasn't reset.
add another test to verify that a successful bgsave indeed resets the
change counter.
in cases where you have
test name {
start_server {
start_server {
assert
}
}
}
the exception will be thrown to the test proc, and the servers are
supposed to be killed on the way out. but it seems there was always a
bug of not cleaning the server stack, and recently (#7404) we started
relying on that stack in order to kill them, so with that bug sometimes
we would have tried to kill the same server twice, and leave one alive.
luckly, in most cases the pattern is:
start_server {
test name {
}
}
This re-implements the redis-cli --pipe test so it no longer depends on a close feature available only in TCL 8.6.
Basically what this test does is run redis-cli --pipe, generates a bunch of commands and pipes them through redis-cli, and inspects the result in both Redis and the redis-cli output.
To do that, we need to close stdin for redis-cli to indicate we're done so it can flush its buffers and exit. TCL has bi-directional channels can only offers a way to "one-way close" a channel with TCL 8.6. To work around that, we now generate the commands into a file and feed that file to redis-cli directly.
As we're writing to an actual file, the number of commands is now reduced.
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
(cherry picked from commit 24b6f62741483f3f695838c0ad091f1931c36df5)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit 663e637da87ee9385527fe3a37edb241a1f97cc6)
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
(cherry picked from commit 3351549c22434337dfa8a262dce678679a35d7da)
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
(cherry picked from commit 99b920534f7710d544c38b870fd10c6053283d99)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 1c35f8741baa0def2f87eeab17898c79f0147d11)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 6b53c630d92c8fbeb9bea0c406c9454fb68b8467)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit efc4189b6227a17f26ed9bd6bbac62bf4bf7ab66)
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
(cherry picked from commit 8d4f055e43ab554adfce617c971f10c4b6423484)
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
(cherry picked from commit fe8d6fe74920798c146a587810ee91ff049a9093)
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
(cherry picked from commit e37c16e42551a3a5c61e1f8a90cfc672d3e010e4)
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
