This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
Starting redis 6.0 and the changes we made to the diskless master to be
suitable for TLS, I made the master avoid reaping (wait3) the pid of the
child until we know all replicas are done reading their rdb.
I did that in order to avoid a state where the rdb_child_pid is -1 but
we don't yet want to start another fork (still busy serving that data to
replicas).
It turns out that the solution used so far was problematic in case the
fork child was being killed (e.g. by the kernel OOM killer), in that
case there's a chance that we currently disabled the read event on the
rdb pipe, since we're waiting for a replica to become writable again.
and in that scenario the master would have never realized the child
exited, and the replica will remain hung too.
Note that there's no mechanism to detect a hung replica while it's in
rdb transfer state.
The solution here is to add another pipe which is used by the parent to
tell the child it is safe to exit. this mean that when the child exits,
for whatever reason, it is safe to reap it.
Besides that, i'm re-introducing an adjustment to REPLCONF ACK which was
part of #6271 (Accelerate diskless master connections) but was dropped
when that PR was rebased after the TLS fork/pipe changes (5a47794).
Now that RdbPipeCleanup no longer calls checkChildrenDone, and the ACK
has chance to detect that the child exited, it should be the one to call
it so that we don't have to wait for cron (server.hz) to do that.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
Don't assume `ps` handles `-h` to display output without headers and
manually trim headers line from output.
(cherry picked from commit b61b663895f16d9f559a14c408c225062254a57b)
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
(cherry picked from commit 2530dc0ebd8be8d792f4673073401377cd5bdc42)
Added RedisModule_HoldString that either returns a
shallow copy of the given String (by increasing
the String ref count) or a new deep copy of String
in case its not possible to get a shallow copy.
Co-authored-by: Itamar Haber <itamar@redislabs.com>
(cherry picked from commit 3f494cc49d25929f27fa75a78d9921a9dee771f2)
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
(cherry picked from commit 8d826393191399e132bd9e56fb51ed83223cc5ca)
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
(cherry picked from commit b7289e912cbe1a011a5569cd67929e83731b9660)
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
(cherry picked from commit 9204a9b2c2f6eb59767ab0bddcde62c75e8c20b0)
The `REDISMODULE_CLIENTINFO_FLAG_SSL` flag was already a part of the `RedisModuleClientInfo` structure but was not implemented.
(cherry picked from commit 64c360c5156ca6ee6d1eb52bfeb3fa48f3b25da5)
besides, hooks test was time sensitive. when the replica managed to
reconnect quickly after the client kill, the test would fail
(cherry picked from commit f7e77759902aa19cfa537ed454e6bc987498e8c5)
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
(cherry picked from commit 109b5ccdcd6e6b8cecdaeb13a246bc49ce7a61f4)
Adds an `optional` value to the previously boolean `tls-auth-clients` configuration keyword.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
(cherry picked from commit f31260b0445f5649449da41555e1272a40ae4af7)
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This is a rebased version of #3078 originally by shaharmor
with the following patches by TysonAndre made after rebasing
to work with the updated C API:
1. Add 2 more unit tests
(wrong argument count error message, integer over 64 bits)
2. Use addReplyArrayLen instead of addReplyMultiBulkLen.
3. Undo changes to src/help.h - for the ZMSCORE PR,
I heard those should instead be automatically
generated from the redis-doc repo if it gets updated
Motivations:
- Example use case: Client code to efficiently check if each element of a set
of 1000 items is a member of a set of 10 million items.
(Similar to reasons for working on #7593)
- HMGET and ZMSCORE already exist. This may lead to developers deciding
to implement functionality that's best suited to a regular set with a
data type of sorted set or hash map instead, for the multi-get support.
Currently, multi commands or lua scripting to call sismember multiple times
would almost definitely be less efficient than a native smismember
for the following reasons:
- Need to fetch the set from the string every time
instead of reusing the C pointer.
- Using pipelining or multi-commands would result in more bytes sent
and received by the client for the repeated SISMEMBER KEY sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- Proposed solutions using Lua or SADD/SDIFF could trigger writes to
memory, which is undesirable on a redis replica server
or when commands get replicated to replicas.
Co-Authored-By: Shahar Mor <shahar@peer5.com>
Co-Authored-By: Tyson Andre <tysonandre775@hotmail.com>
Added RedisModule_HoldString that either returns a
shallow copy of the given String (by increasing
the String ref count) or a new deep copy of String
in case its not possible to get a shallow copy.
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Diskless master has some inherent latencies.
1) fork starts with delay from cron rather than immediately
2) replica is put online only after an ACK. but the ACK
was sent only once a second.
3) but even if it would arrive immediately, it will not
register in case cron didn't yet detect that the fork is done.
Besides that, when a replica disconnects, it doesn't immediately
attempts to re-connect, it waits for replication cron (one per second).
in case it was already online, it may be important to try to re-connect
as soon as possible, so that the backlog at the master doesn't vanish.
In case it disconnected during rdb transfer, one can argue that it's
not very important to re-connect immediately, but this is needed for the
"diskless loading short read" test to be able to run 100 iterations in 5
seconds, rather than 3 (waiting for replication cron re-connection)
changes in this commit:
1) sync command starts a fork immediately if no sync_delay is configured
2) replica sends REPLCONF ACK when done reading the rdb (rather than on 1s cron)
3) when a replica unexpectedly disconnets, it immediately tries to
re-connect rather than waiting 1s
4) when when a child exits, if there is another replica waiting, we spawn a new
one right away, instead of waiting for 1s replicationCron.
5) added a call to connectWithMaster from replicationSetMaster. which is called
from the REPLICAOF command but also in 3 places in cluster.c, in all of
these the connection attempt will now be immediate instead of delayed by 1
second.
side note:
we can add a call to rdbPipeReadHandler in replconfCommand when getting
a REPLCONF ACK from the replica to solve a race where the replica got
the entire rdb and EOF marker before we detected that the pipe was
closed.
in the test i did see this race happens in one about of some 300 runs,
but i concluded that this race is unlikely in real life (where the
replica is on another host and we're more likely to first detect the
pipe was closed.
the test runs 100 iterations in 3 seconds, so in some cases it'll take 4
seconds instead (waiting for another REPLCONF ACK).
Removing unneeded startBgsaveForReplication from updateSlavesWaitingForBgsave
Now that CheckChildrenDone is calling the new replicationStartPendingFork
(extracted from serverCron) there's actually no need to call
startBgsaveForReplication from updateSlavesWaitingForBgsave anymore,
since as soon as updateSlavesWaitingForBgsave returns, CheckChildrenDone is
calling replicationStartPendingFork that handles that anyway.
The code in updateSlavesWaitingForBgsave had a bug in which it ignored
repl-diskless-sync-delay, but removing that code shows that this bug was
hiding another bug, which is that the max_idle should have used >= and
not >, this one second delay has a big impact on my new test.
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
(cherry picked from commit e5227aab899628653285478a9d1083e8e8f51b57)
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
(cherry picked from commit 5977a94842a25140520297fe4bfda15e0e4de711)
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
(cherry picked from commit 909bc97c526db757a3d022b29911ff6d08eba59c)
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
(cherry picked from commit 8e76e13472b7d277af78691775c2cf845f68ab90)
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
(cherry picked from commit 65a3307bc95aadbc91d85cdf9dfbe1b3493222ca)
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
(cherry picked from commit a89bf734a933e45b9dd3ae85ef4c3b62bd6891d8)
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
