Diskless master has some inherent latencies.
1) fork starts with delay from cron rather than immediately
2) replica is put online only after an ACK. but the ACK
was sent only once a second.
3) but even if it would arrive immediately, it will not
register in case cron didn't yet detect that the fork is done.
Besides that, when a replica disconnects, it doesn't immediately
attempts to re-connect, it waits for replication cron (one per second).
in case it was already online, it may be important to try to re-connect
as soon as possible, so that the backlog at the master doesn't vanish.
In case it disconnected during rdb transfer, one can argue that it's
not very important to re-connect immediately, but this is needed for the
"diskless loading short read" test to be able to run 100 iterations in 5
seconds, rather than 3 (waiting for replication cron re-connection)
changes in this commit:
1) sync command starts a fork immediately if no sync_delay is configured
2) replica sends REPLCONF ACK when done reading the rdb (rather than on 1s cron)
3) when a replica unexpectedly disconnets, it immediately tries to
re-connect rather than waiting 1s
4) when when a child exits, if there is another replica waiting, we spawn a new
one right away, instead of waiting for 1s replicationCron.
5) added a call to connectWithMaster from replicationSetMaster. which is called
from the REPLICAOF command but also in 3 places in cluster.c, in all of
these the connection attempt will now be immediate instead of delayed by 1
second.
side note:
we can add a call to rdbPipeReadHandler in replconfCommand when getting
a REPLCONF ACK from the replica to solve a race where the replica got
the entire rdb and EOF marker before we detected that the pipe was
closed.
in the test i did see this race happens in one about of some 300 runs,
but i concluded that this race is unlikely in real life (where the
replica is on another host and we're more likely to first detect the
pipe was closed.
the test runs 100 iterations in 3 seconds, so in some cases it'll take 4
seconds instead (waiting for another REPLCONF ACK).
Removing unneeded startBgsaveForReplication from updateSlavesWaitingForBgsave
Now that CheckChildrenDone is calling the new replicationStartPendingFork
(extracted from serverCron) there's actually no need to call
startBgsaveForReplication from updateSlavesWaitingForBgsave anymore,
since as soon as updateSlavesWaitingForBgsave returns, CheckChildrenDone is
calling replicationStartPendingFork that handles that anyway.
The code in updateSlavesWaitingForBgsave had a bug in which it ignored
repl-diskless-sync-delay, but removing that code shows that this bug was
hiding another bug, which is that the max_idle should have used >= and
not >, this one second delay has a big impact on my new test.
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
on ci.redis.io the test fails a lot, reporting that bgsave didn't end.
increaseing the timeout we wait for that bgsave to get aborted.
in addition to that, i also verify that it indeed got aborted by
checking that the save counter wasn't reset.
add another test to verify that a successful bgsave indeed resets the
change counter.
in cases where you have
test name {
start_server {
start_server {
assert
}
}
}
the exception will be thrown to the test proc, and the servers are
supposed to be killed on the way out. but it seems there was always a
bug of not cleaning the server stack, and recently (#7404) we started
relying on that stack in order to kill them, so with that bug sometimes
we would have tried to kill the same server twice, and leave one alive.
luckly, in most cases the pattern is:
start_server {
test name {
}
}
This re-implements the redis-cli --pipe test so it no longer depends on a close feature available only in TCL 8.6.
Basically what this test does is run redis-cli --pipe, generates a bunch of commands and pipes them through redis-cli, and inspects the result in both Redis and the redis-cli output.
To do that, we need to close stdin for redis-cli to indicate we're done so it can flush its buffers and exit. TCL has bi-directional channels can only offers a way to "one-way close" a channel with TCL 8.6. To work around that, we now generate the commands into a file and feed that file to redis-cli directly.
As we're writing to an actual file, the number of commands is now reduced.
Before this commit, the output of "./runtest-cluster --help" is incorrect.
After this commit, the format of the following 3 output is consistent:
./runtest --help
./runtest-cluster --help
./runtest-sentinel --help
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
in the majority of the cases (on this rarely used feature) we want to
stop and be able to connect to the shard with redis-cli.
since these are two different processes interracting with the tty we
need to stop both, and we'll have to hit enter twice, but it's not that
bad considering it is rarely used.
* Tests: fix and reintroduce redis-cli tests.
These tests have been broken and disabled for 10 years now!
* TLS: add remaining redis-cli support.
This adds support for the redis-cli --pipe, --rdb and --replica options
previously unsupported in --tls mode.
* Fix writeConn().
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
these tests create several edge cases that are otherwise uncovered (at
least not consistently) by the test suite, so although they're no longer
testing what they were meant to test, it's still a good idea to keep
them in hope that they'll expose some issue in the future.
i.e. don't start the search from scratch hitting the used ones again.
this will also reduce the likelihood of collisions (if there are any
left) by increasing the time until we re-use a port we did use in the
past.
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
There's a rare case which leads to stagnation in the defragger, causing
it to keep scanning the keyspace and do nothing (not moving any
allocation), this happens when all the allocator slabs of a certain bin
have the same % utilization, but the slab from which new allocations are
made have a lower utilization.
this commit fixes it by removing the current slab from the overall
average utilization of the bin, and also eliminate any precision loss in
the utilization calculation and move the decision about the defrag to
reside inside jemalloc.
and also add a test that consistently reproduce this issue.
