getKeysResults is typically initialized with 2kb of zeros (16 * 256),
which isn't strictly necessary since the only thing we have to
initialize is some of the metadata fields. The rest of the data can
remain junk as long as we don't access it. This was a bit of a
regression in 7.0 with the keyspecs, since we doubled the size of the
zeros, but hopefully this recovers a lot of the performance drop.
I saw a modest performance bump for deep pipeline of cluster mode (~8%).
I think we would see some comparable improvements in the other places
where we are using it such as tracking and ACLs.
---------
Signed-off-by: Madelyn Olson <matolson@amazon.com>
We added some clang-format off comments before we had decided on the
format configuration. Now, it turns out that turning formatting off is
often not necessary.
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
I have validated that these settings closely match the existing coding
style with one major exception on `BreakBeforeBraces`, which will be
`Attach` going forward. The mixed `BreakBeforeBraces` styles in the
current codebase are hard to imitate and also very odd IMHO - see below
```
if (a == 1) { /*Attach */
}
```
```
if (a == 1 ||
b == 2)
{ /* Why? */
}
```
Please do NOT merge just yet. Will add the github action next once the
style is reviewed/approved.
---------
Signed-off-by: Ping Xie <pingxie@google.com>
Updated serverPanic output in db.c based on the
extended-redis-compatibility config. and also updated comments in other
files.
---------
Signed-off-by: Shivshankar-Reddy <shiva.sheri.github@gmail.com>
This is a preparation for adding clang-format.
These comments prevent automatic formatting in some places. With these
exceptions, we will be able to run clang-format on the rest of the code.
This is a preparation for #323.
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This patch try to do following things:
1. Rename `redis_*` and `REDIS_*` macros defined in config.h to
`valkey_*`, `VALKEY_*` and update associated used files. (`redis_fstat`,
`redis_fsync`, `REDIS_THREAD_STACK_SIZE`, etc.)
2. Remove the leading double underscore for guard macro in config.h.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Log messages containing "Redis" in some files are changed.
Add macro SERVER_TITLE defined to "Valkey" (uppercase V) is introduced
and used in log messages, so at least it will be easy to patch this
definition to get Redis or any other name in the logs instead of Valkey.
Change "Redis" in some log messages to use %s and SERVER_TITLE.
This is a partial implementation of
https://github.com/valkey-io/valkey/issues/207
---------
Signed-off-by: 0del <bany.y0599@gmail.com>
Low-risk error replies containing "Redis" are changed.
In most cases, the word "Redis" is simply removed from the error message,
such as in "This Redis instance is not configured to use an ACL file. (...)",
the message is changed to "This instance is not configured to use an ACL
file. (...)".
Additionally, error replies from `redis.call` in a Lua script are
affected, such as
* "Please specify at least one argument for this redis lib call"
* "Wrong number of args calling Redis command from script"
* "Unknown Redis command called from script"
* "Invalid command passed to redis.acl_check_cmd()"
The name Redis is simply removed from these error message. In the last
one above, "redis.acl_check_cmd()" is replaced by
"server.acl_check_cmd()" in the error message.
The following error replies are considered high of causing problems for
clients, so they are not changed in this commit:
* (not in scope) "-MISCONF Redis is configured to save RDB snapshots
(...)"
* (not in scope) "-LOADING Redis is loading the dataset in memory"
* (not in scope) "-BUSY Redis is busy running a script (...)"
Fixes#204
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This includes comments used for module API documentation.
* Strategy for replacement: Regex search: `(//|/\*| \*|#).* ("|\()?(r|R)edis( |\.
|'|\n|,|-|\)|")(?!nor the names of its contributors)(?!Ltd.)(?!Labs)(?!Contributors.)`
* Don't edit copyright comments
* Replace "Redis version X.X" -> "Redis OSS version X.X" to distinguish
from newly licensed repository
* Replace "Redis Object" -> "Object"
* Exclude markdown for now
* Don't edit Lua scripting comments referring to redis.X API
* Replace "Redis Protocol" -> "RESP"
* Replace redis-benchmark, -cli, -server, -check-aof/rdb with "valkey-"
prefix
* Most other places, I use best judgement to either remove "Redis", or
replace with "the server" or "server"
Fixes#148
---------
Signed-off-by: Jacob Murphy <jkmurphy@google.com>
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Remove trademarked wording on configuration layer.
Following changes for release notes:
1. Rename redis.conf to valkey.conf
2. Pre-filled config in the template config file: Changing pidfile to `/var/run/valkey_6379.pid`
Signed-off-by: Harkrishn Patro <harkrisp@amazon.com>
# Description
Gather most of the scattered `redisDb`-related code from the per-slot
dict PR (#11695) and turn it to a new data structure, `kvstore`. i.e.
it's a class that represents an array of dictionaries.
# Motivation
The main motivation is code cleanliness, the idea of using an array of
dictionaries is very well-suited to becoming a self-contained data
structure.
This allowed cleaning some ugly code, among others: loops that run twice
on the main dict and expires dict, and duplicate code for allocating and
releasing this data structure.
# Notes
1. This PR reverts the part of https://github.com/redis/redis/pull/12848
where the `rehashing` list is global (handling rehashing `dict`s is
under the responsibility of `kvstore`, and should not be managed by the
server)
2. This PR also replaces the type of `server.pubsubshard_channels` from
`dict**` to `kvstore` (original PR:
https://github.com/redis/redis/pull/12804). After that was done,
server.pubsub_channels was also chosen to be a `kvstore` (with only one
`dict`, which seems odd) just to make the code cleaner by making it the
same type as `server.pubsubshard_channels`, see
`pubsubtype.serverPubSubChannels`
3. the keys and expires kvstores are currenlty configured to allocate
the individual dicts only when the first key is added (unlike before, in
which they allocated them in advance), but they won't release them when
the last key is deleted.
Worth mentioning that due to the recent change the reply of DEBUG
HTSTATS changed, in case no keys were ever added to the db.
before:
```
127.0.0.1:6379> DEBUG htstats 9
[Dictionary HT]
Hash table 0 stats (main hash table):
No stats available for empty dictionaries
[Expires HT]
Hash table 0 stats (main hash table):
No stats available for empty dictionaries
```
after:
```
127.0.0.1:6379> DEBUG htstats 9
[Dictionary HT]
[Expires HT]
```
Currently slowlog gets disabled if slowlog-log-slower-than is set to less than zero. I think we should also disable it if slowlog-max-len is set to zero. We apply the same logic to acllog-max-len.
We have achieved replacing `slots_to_keys` radix tree with key->slot
linked list (#9356), and then replacing the list with slot specific
dictionaries for keys (#11695).
Shard channels behave just like keys in many ways, and we also need a
slots->channels mapping. Currently this is still done by using a radix
tree. So we should split `server.pubsubshard_channels` into 16384 dicts
and drop the radix tree, just like what we did to DBs.
Some benefits (basically the benefits of what we've done to DBs):
1. Optimize counting channels in a slot. This is currently used only in
removing channels in a slot. But this is potentially more useful:
sometimes we need to know how many channels there are in a specific slot
when doing slot migration. Counting is now implemented by traversing the
radix tree, and with this PR it will be as simple as calling `dictSize`,
from O(n) to O(1).
2. The radix tree in the cluster has been removed. The shard channel
names no longer require additional storage, which can save memory.
3. Potentially useful in slot migration, as shard channels are logically
split by slots, thus making it easier to migrate, remove or add as a
whole.
4. Avoid rehashing a big dict when there is a large number of channels.
Drawbacks:
1. Takes more memory than using radix tree when there are relatively few
shard channels.
What this PR does:
1. in cluster mode, split `server.pubsubshard_channels` into 16384
dicts, in standalone mode, still use only one dict.
2. drop the `slots_to_channels` radix tree.
3. to save memory (to solve the drawback above), all 16384 dicts are
created lazily, which means only when a channel is about to be inserted
to the dict will the dict be initialized, and when all channels are
deleted, the dict would delete itself.
5. use `server.shard_channel_count` to keep track of the number of all
shard channels.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Previous implementation would disconnect _all_ clients when running `ACL
LOAD`, which wasn't very useful.
This change brings the behavior in line with that of `ACL SETUSER`, `ACL
DELUSER`, in that only clients whose user is deleted or clients
subscribed to channels which they no longer have access to will be
disconnected.
---------
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
The raxFind implementation uses a special pointer value (the address of
a static string) as the "not found" value. It works as long as actual
pointers were used. However we've seen usages where long long,
non-pointer values have been used. It creates a risk that one of the
long long value precisely is the address of the special "not found"
value. This commit changes raxFind to return 1 or 0 to indicate
elementhood, and take in a new void **value to optionally return the
associated value.
By extension, this also allow the RedisModule_DictSet/Replace operations
to also safely insert integers instead of just pointers.
In #11489, we consider acl username to be sensitive information,
and consider the ACL GETUSER a sensitive command and remove it
from redis-cli historyfile.
This PR redact username information in ACL GETUSER and ACL DELUSER
from SLOWLOG, and also remove ACL DELUSER from redis-cli historyfile.
This PR also mark tls-key-file-pass and tls-client-key-file-pass
as sensitive config, will redact it from SLOWLOG and also
remove them from redis-cli historyfile.
This is just a cleanup, although they are both correct, the change
is normatively better, and addReplyError is also much faster.
Although not important, speed is not important for these error cases.
This PR adds a new Module API int RM_AddACLCategory(RedisModuleCtx *ctx, const char *category_name) to add a new ACL command category.
Here, we initialize the ACLCommandCategories array by allocating space for 64 categories and duplicate the 21 default categories from the predefined array 'ACLDefaultCommandCategories' into the ACLCommandCategories array while ACL initialization. Valid ACL category names can only contain alphanumeric characters, underscores, and dashes.
The API when called, checks for the onload flag, category name validity, and for duplicate category name if present. If the conditions are satisfied, the API adds the new category to the trailing end of the ACLCommandCategories array and assigns the acl_categories flag bit according to the index at which the category is added.
If any error is encountered the errno is set accordingly by the API.
---------
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
When adding a new ACL rule was added, an attempt was made to remove
any "overlapping" rules. However, there when a match was found, the search
was not resumed at the right location, but instead after the original position of
the original command.
For example, if the current rules were `-config +config|get` and a rule `+config`
was added. It would identify that `-config` was matched, but it would skip over
`+config|get`, leaving the compacted rule `-config +config`. This would be evaluated
safely, but looks weird.
This bug can only be triggered with subcommands, since that is the only way to
have sequential matching rules. Resolves#12470. This is also only present in 7.2.
I think there was also a minor risk of removing another valid rule, since it would start
the search of the next command at an arbitrary point. I couldn't find a valid offset that
would have cause a match using any of the existing commands that have subcommands
with another command.
When doing merge selector, we should check whether the merge
has started (i.e., whether open_bracket_start is -1) every time.
Otherwise, encountering an illegal selector pattern could succeed
and also cause memory leaks, for example:
```
acl setuser test1 (+PING (+SELECT (+DEL )
```
The above would leak memory and succeed with only DEL being applied,
and would now error after the fix.
Co-authored-by: Oran Agra <oran@redislabs.com>
In the original implementation, the time complexity of the commands
is actually O(N*M), where N is the number of patterns the client is
already subscribed and M is the number of patterns to subscribe to.
The docs are all wrong about this.
Specifically, because the original client->pubsub_patterns is a list,
so we need to do listSearchKey which is O(N). In this PR, we change it
to a dict, so the search becomes O(1).
At the same time, both pubsub_channels and pubsubshard_channels are dicts.
Changing pubsub_patterns to a dictionary improves the readability and
maintainability of the code.
This leak will only happen in loadServerConfigFromString,
that is, when we are loading a redis.conf, and the user is wrong.
Because it happens in loadServerConfigFromString, redis will
exit if there is an error, so this is actually just a cleanup.
Technically declaring a prototype with an empty declaration has been deprecated since the early days of C, but we never got a warning for it. C2x will apparently be introducing a breaking change if you are using this type of declarator, so Clang 15 has started issuing a warning with -pedantic. Although not apparently a problem for any of the compiler we build on, if feels like the right thing is to properly adhere to the C standard and use (void).
The existing logic for killing pub-sub clients did not handle the `allchannels`
permission correctly. For example, if you:
ACL SETUSER foo allchannels
Have a client authenticate as the user `foo` and subscribe to a channel, and then:
ACL SETUSER foo resetchannels
The subscribed client would not be disconnected, though new clients under that user
would be blocked from subscribing to any channels.
This was caused by an incomplete optimization in `ACLKillPubsubClientsIfNeeded`
checking whether the new channel permissions were a strict superset of the old ones.
This allows modules to register commands to existing ACL categories and blocks the creation of [sub]commands, datatypes and registering the configs outside of the OnLoad function.
For allowing modules to register commands to existing ACL categories,
This PR implements a new API int RM_SetCommandACLCategories() which takes a pointer to a RedisModuleCommand and a C string aclflags containing the set of space separated ACL categories.
Example, 'write slow' marks the command as part of the write and slow ACL categories.
The C string aclflags is tokenized by implementing a helper function categoryFlagsFromString(). Theses tokens are matched and the corresponding ACL categories flags are set by a helper function matchAclCategoriesFlags. The helper function categoryFlagsFromString() returns the corresponding categories_flags or returns -1 if some token not processed correctly.
If the module contains commands which are registered to existing ACL categories, the number of [sub]commands are tracked by num_commands_with_acl_categories in struct RedisModule. Further, the allowed command bit-map of the existing users are recomputed from the command_rules list, by implementing a function called ACLRecomputeCommandBitsFromCommandRulesAllUsers() for the existing users to have access to the module commands on runtime.
## Breaking change
This change requires that registering commands and subcommands only occur during a modules "OnLoad" function, in order to allow efficient recompilation of ACL bits. We also chose to block registering configs and types, since we believe it's only valid for those to be created during onLoad. We check for this onload flag in struct RedisModule to check if the call is made from the OnLoad function.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
This change adds new module callbacks that can override the default password based authentication associated with ACLs. With this, Modules can register auth callbacks through which they can implement their own Authentication logic. When `AUTH` and `HELLO AUTH ...` commands are used, Module based authentication is attempted and then normal password based authentication is attempted if needed.
The new Module APIs added in this PR are - `RM_RegisterCustomAuthCallback` and `RM_BlockClientOnAuth` and `RedisModule_ACLAddLogEntryByUserName `.
Module based authentication will be attempted for all Redis users (created through the ACL SETUSER cmd or through Module APIs) even if the Redis user does not exist at the time of the command. This gives a chance for the Module to create the RedisModule user and then authenticate via the RedisModule API - from the custom auth callback.
For the AUTH command, we will support both variations - `AUTH <username> <password>` and `AUTH <password>`. In case of the `AUTH <password>` variation, the custom auth callbacks are triggered with “default” as the username and password as what is provided.
### RedisModule_RegisterCustomAuthCallback
```
void RM_RegisterCustomAuthCallback(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback cb) {
```
This API registers a callback to execute to prior to normal password based authentication. Multiple callbacks can be registered across different modules. These callbacks are responsible for either handling the authentication, each authenticating the user or explicitly denying, or deferring it to other authentication mechanisms. Callbacks are triggered in the order they were registered. When a Module is unloaded, all the auth callbacks registered by it are unregistered. The callbacks are attempted, in the order of most recently registered callbacks, when the AUTH/HELLO (with AUTH field is provided) commands are called. The callbacks will be called with a module context along with a username and a password, and are expected to take one of the following actions:
(1) Authenticate - Use the RM_Authenticate* API successfully and return `REDISMODULE_AUTH_HANDLED`. This will immediately end the auth chain as successful and add the OK reply.
(2) Block a client on authentication - Use the `RM_BlockClientOnAuth` API and return `REDISMODULE_AUTH_HANDLED`. Here, the client will be blocked until the `RM_UnblockClient `API is used which will trigger the auth reply callback (provided earlier through the `RM_BlockClientOnAuth`). In this reply callback, the Module should authenticate, deny or skip handling authentication.
(3) Deny Authentication - Return `REDISMODULE_AUTH_HANDLED` without authenticating or blocking the client. Optionally, `err` can be set to a custom error message. This will immediately end the auth chain as unsuccessful and add the ERR reply.
(4) Skip handling Authentication - Return `REDISMODULE_AUTH_NOT_HANDLED` without blocking the client. This will allow the engine to attempt the next custom auth callback.
If none of the callbacks authenticate or deny auth, then password based auth is attempted and will authenticate or add failure logs and reply to the clients accordingly.
### RedisModule_BlockClientOnAuth
```
RedisModuleBlockedClient *RM_BlockClientOnAuth(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback reply_callback,
void (*free_privdata)(RedisModuleCtx*,void*))
```
This API can only be used from a Module from the custom auth callback. If a client is not in the middle of custom module based authentication, ERROR is returned. Otherwise, the client is blocked and the `RedisModule_BlockedClient` is returned similar to the `RedisModule_BlockClient` API.
### RedisModule_ACLAddLogEntryByUserName
```
int RM_ACLAddLogEntryByUserName(RedisModuleCtx *ctx, RedisModuleString *username, RedisModuleString *object, RedisModuleACLLogEntryReason reason)
```
Adds a new entry in the ACL log with the `username` RedisModuleString provided. This simplifies the Module usage because now, developers do not need to create a Module User just to add an error ACL Log entry. Aside from accepting username (RedisModuleString) instead of a RedisModuleUser, it is the same as the existing `RedisModule_ACLAddLogEntry` API.
### Breaking changes
- HELLO command - Clients can now only set the client name and RESP protocol from the `HELLO` command if they are authenticated. Also, we now finish command arg validation first and return early with a ERR reply if any arg is invalid. This is to avoid mutating the client name / RESP from a command that would have failed on invalid arguments.
### Notable behaviors
- Module unblocking - Now, we will not allow Modules to block the client from inside the context of a reply callback (triggered from the Module unblock flow `moduleHandleBlockedClients`).
---------
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
* Make it clear that current_client is the root client that was called by
external connection
* add executing_client which is the client that runs the current command
(can be a module or a script)
* Remove script_caller that was used for commands that have CLIENT_SCRIPT
to get the client that called the script. in most cases, that's the current_client,
and in others (when being called from a module), it could be an intermediate
client when we actually want the original one used by the external connection.
bugfixes:
* RM_Call with C flag should log ACL errors with the requested user rather than
the one used by the original client, this also solves a crash when RM_Call is used
with C flag from a detached thread safe context.
* addACLLogEntry would have logged info about the script_caller, but in case the
script was issued by a module command we actually want the current_client. the
exception is when RM_Call is called from a timer event, in which case we don't
have a current_client.
behavior changes:
* client side tracking for scripts now tracks the keys that are read by the script
instead of the keys that are declared by the caller for EVAL
other changes:
* Log both current_client and executing_client in the crash log.
* remove prepareLuaClient and resetLuaClient, being dead code that was forgotten.
* remove scriptTimeSnapshot and snapshot_time and instead add cmd_time_snapshot
that serves all commands and is reset only when execution nesting starts.
* remove code to propagate CLIENT_FORCE_REPL from the executed command
to the script caller since scripts aren't propagated anyway these days and anyway
this flag wouldn't have had an effect since CLIENT_PREVENT_PROP is added by scriptResetRun.
* fix a module GIL violation issue in afterSleep that was introduced in #10300 (unreleased)
Added 3 fields to the ACL LOG - adds entry_id, timestamp_created and timestamp_last_updated, which updates similar existing log error entries. The pair - entry_id, timestamp_created is a unique identifier of this entry, in case the node dies and is restarted, it can detect that if it's a new series.
The primary use case of Unique id is to uniquely identify the error messages and not to detect if the server has restarted.
entry-id is the sequence number of the entry (starting at 0) since the server process started. Can also be used to check if items were "lost" if they fell between periods.
timestamp-created is the unix-time in ms at the time the entry was first created.
timestamp-last-updated is the unix-time in ms at the time the entry was last updated
Time_created gives the absolute time which better accounts for network time as compared to time since. It can also be older than 60 secs and presently there is no field that can display the original time of creation once the error entry is updated.
The reason of timestamp_last_updated field is that it provides a more precise value for the “last time” an error was seen where as, presently it is only in the 60 second period.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Motivation: for applications that use RM ACL verification functions, they would
want to return errors back to the user, in ways that are consistent with Redis.
While investigating how we should return ACL errors to the user, we realized that
Redis isn't consistent, and currently returns ACL error strings in 3 primary ways.
[For the actual implications of this change, see the "Impact" section at the bottom]
1. how it returns an error when calling a command normally
ACL_DENIED_CMD -> "this user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "this user has no permissions to access one of the keys used as arguments"
ACL_DENIED_CHANNEL -> "this user has no permissions to access one of the channels used as arguments"
2. how it returns an error when calling via 'acl dryrun' command
ACL_DENIED_CMD -> "This user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "This user has no permissions to access the '%s' key"
ACL_DENIED_CHANNEL -> "This user has no permissions to access the '%s' channel"
3. how it returns an error via RM_Call (and scripting is similar).
ACL_DENIED_CMD -> "can't run this command or subcommand";
ACL_DENIED_KEY -> "can't access at least one of the keys mentioned in the command arguments";
ACL_DENIED_CHANNEL -> "can't publish to the channel mentioned in the command";
In addition, if one wants to use RM_Call's "dry run" capability instead of the RM ACL
functions directly, one also sees a different problem than it returns ACL errors with a -ERR,
not a -PERM, so it can't be returned directly to the caller.
This PR modifies the code to generate a base message in a common manner with the ability
to set verbose flag for acl dry run errors, and keep it unset for normal/rm_call/script cases
```c
sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose) {
switch (acl_res) {
case ACL_DENIED_CMD:
return sdscatfmt(sdsempty(), "User %S has no permissions to run "
"the '%S' command", user->name, cmd->fullname);
case ACL_DENIED_KEY:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' key", user->name, errored_val);
} else {
return sdsnew("No permissions to access a key");
}
case ACL_DENIED_CHANNEL:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' channel", user->name, errored_val);
} else {
return sdsnew("No permissions to access a channel");
}
}
```
The caller can append/prepend the message (adding NOPERM for normal/RM_Call or indicating it's within a script).
Impact:
- Plain commands, as well as scripts and RM_Call now include the user name.
- ACL DRYRUN remains the only one that's verbose (mentions the offending channel or key name)
- Changes RM_Call ACL errors from being a `-ERR` to being `-NOPERM` (besides for textual changes)
**This somewhat a breaking change, but it only affects the RM_Call with both `C` and `E`, or `D`**
- Changes ACL errors in scripts textually from being
`The user executing the script <old non unified text>`
to
`ACL failure in script: <new unified text>`
Freeze time during execution of scripts and all other commands.
This means that a key is either expired or not, and doesn't change
state during a script execution. resolves#10182
This PR try to add a new `commandTimeSnapshot` function.
The function logic is extracted from `keyIsExpired`, but the related
calls to `fixed_time_expire` and `mstime()` are removed, see below.
In commands, we will avoid calling `mstime()` multiple times
and just use the one that sampled in call. The background is,
e.g. using `PEXPIRE 1` with valgrind sometimes result in the key
being deleted rather than expired. The reason is that both `PEXPIRE`
command and `checkAlreadyExpired` call `mstime()` separately.
There are other more important changes in this PR:
1. Eliminate `fixed_time_expire`, it is no longer needed.
When we want to sample time we should always use a time snapshot.
We will use `in_nested_call` instead to update the cached time in `call`.
2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`.
Now `commandTimeSnapshot` will always return the sample time, the
`lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated
cached time (because `processCommand` is out of the `call` context).
We put the call to `updateCachedTime` in `aftersleep`.
3. Cache the time each time the module lock Redis.
Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock`
and `RM_ThreadSafeContextTryLock`
Currently the commandTimeSnapshot change affects the following TTL commands:
- SET EX / SET PX
- EXPIRE / PEXPIRE
- SETEX / PSETEX
- GETEX EX / GETEX PX
- TTL / PTTL
- EXPIRETIME / PEXPIRETIME
- RESTORE key TTL
And other commands just use the cached mstime (including TIME).
This is considered to be a breaking change since it can break a script
that uses a loop to wait for a key to expire.
Adds a number of user management/ACL validaiton/command execution functions to improve a
Redis module's ability to enforce ACLs correctly and easily.
* RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both
validate ACLs (if requested and set) as well as assign to the client so that scripts executed via
RM_Call will have proper ACL validation.
* RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP
and have it applied to the user
* RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump
and list). Contains an optimization to cache the stringified version until the underlying ACL is modified.
* Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the
command, to actually running the command with the right user, so that it also affects commands
inside EVAL scripts. see #11231
Starting from 6.2, after ACL SETUSER user reset, the user
will carry the sanitize-payload flag. It was added in #7807,
and then ACL SETUSER reset is inconsistent with default
newly created user which missing sanitize-payload flag.
Same as `off` and `on` these two bits are mutually exclusive,
the default created user needs to have sanitize-payload flag.
Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser.
Note that the bug don't have any real implications,
since the code in rdb.c (rdbLoadObject) checks for
`USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that
`USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters.
Added tests to make sure it won't be broken in the future,
and updated the comment in ACLSetUser and redis.conf
As an outstanding part mentioned in #10737, we could just make the cluster config file and
ACL file saving done with a more safe and atomic pattern (write to temp file, fsync, rename, fsync dir).
The cluster config file uses an in-place overwrite and truncation (which was also used by the
main config file before #7824).
The ACL file is using the temp file and rename approach, but was missing an fsync.
Co-authored-by: 朱天 <zhutian03@meituan.com>
The PR extends RM_Call with 3 new capabilities using new flags that
are given to RM_Call as part of the `fmt` argument.
It aims to assist modules that are getting a list of commands to be
executed from the user (not hard coded as part of the module logic),
think of a module that implements a new scripting language...
* `S` - Run the command in a script mode, this means that it will raise an
error if a command which are not allowed inside a script (flaged with the
`deny-script` flag) is invoked (like SHUTDOWN). In addition, on script mode,
write commands are not allowed if there is not enough good replicas (as
configured with `min-replicas-to-write`) and/or a disk error happened.
* `W` - no writes mode, Redis will reject any command that is marked with `write`
flag. Again can be useful to modules that implement a new scripting language
and wants to prevent any write commands.
* `E` - Return errors as RedisModuleCallReply. Today the errors that happened
before the command was invoked (like unknown commands or acl error) return
a NULL reply and set errno. This might be missing important information about
the failure and it is also impossible to just pass the error to the user using
RM_ReplyWithCallReply. This new flag allows you to get a RedisModuleCallReply
object with the relevant error message and treat it as if it was an error that was
raised by the command invocation.
Tests were added to verify the new code paths.
In addition small refactoring was done to share some code between modules,
scripts, and `processCommand` function:
1. `getAclErrorMessage` was added to `acl.c` to unified to log message extraction
from the acl result
2. `checkGoodReplicasStatus` was added to `replication.c` to check the status of
good replicas. It is used on `scriptVerifyWriteCommandAllow`, `RM_Call`, and
`processCommand`.
3. `writeCommandsGetDiskErrorMessage` was added to `server.c` to get the error
message on persistence failure. Again it is used on `scriptVerifyWriteCommandAllow`,
`RM_Call`, and `processCommand`.
Currently the sort and sort_ro can access external keys via `GET` and `BY`
in order to make sure the user cannot violate the authorization ACL
rules, the decision is to reject external keys access patterns unless ACL allows
SORT full access to all keys.
I.e. for backwards compatibility, SORT with GET/BY keeps working, but
if ACL has restrictions to certain keys, these features get permission denied.
### Implemented solution
We have discussed several potential solutions and decided to only allow the GET and BY
arguments when the user has all key permissions with the SORT command. The reasons
being that SORT with GET or BY is problematic anyway, for instance it is not supported in
cluster mode since it doesn't declare keys, and we're not sure the combination of that feature
with ACL key restriction is really required.
**HOWEVER** If in the fullness of time we will identify a real need for fine grain access
support for SORT, we would implement the complete solution which is the alternative
described below.
### Alternative (Completion solution):
Check sort ACL rules after executing it and before committing output (either via store or
to COB). it would require making several changes to the sort command itself. and would
potentially cause performance degradation since we will have to collect all the get keys
instead of just applying them to a temp array and then scan the access keys against the
ACL selectors. This solution can include an optimization to avoid the overheads of collecting
the key names, in case the ACL rules grant SORT full key-access, or if the ACL key pattern
literal matches the one used in GET/BY. It would also mean that authorization would be
O(nlogn) since we will have to complete most of the command execution before we can
perform verification
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This implements the following main pieces of functionality:
* Renames key spec "CHANNEL" to be "NOT_KEY", and update the documentation to
indicate it's for cluster routing and not for any other key related purpose.
* Add the getchannels-api, so that modules can now define commands that are subject to
ACL channel permission checks.
* Add 4 new flags that describe how a module interacts with a command (SUBSCRIBE, PUBLISH,
UNSUBSCRIBE, and PATTERN). They are all technically composable, however not sure how a
command could both subscribe and unsubscribe from a command at once, but didn't see
a reason to add explicit validation there.
* Add two new module apis RM_ChannelAtPosWithFlags and RM_IsChannelsPositionRequest to
duplicate the functionality provided by the keys position APIs.
* The RM_ACLCheckChannelPermissions (only released in 7.0 RC1) was changed to take flags
rather than a boolean literal.
* The RM_ACLCheckKeyPermissions (only released in 7.0 RC1) was changed to take flags
corresponding to keyspecs instead of custom permission flags. These keyspec flags mimic
the flags for ACLCheckChannelPermissions.
