We don't think we really care about optimizing for the empty DB case,
which should be uncommon. Adding branches hurts branch prediction.
Signed-off-by: Binbin <binloveplay1314@qq.com>
The cluster-node-timeout is 3000 in our tests, the timing test wasn't
succeeding, so extending the wait_for made them much more reliable.
Signed-off-by: Binbin <binloveplay1314@qq.com>
In some cases bgsave child process can run for a long time exhausting
system resources. Although it is possible to kill the bgsave child
process from the system shell, sometimes it is not possible allowing OS
level access.
This PR adds a new subcommand to the BGSAVE command.
When user will issue `BGSAVE CANCEL`, it will do one of the 2:
1. In case a bgsave child process is currently running, the child
process would be immediately killed thus terminating any
save/replication full sync process.
2. In case a bgsave child process is SCHEDULED to run, the scheduled
execution will be cancelled.
---------
Signed-off-by: ranshid <ranshid@amazon.com>
Signed-off-by: ranshid <88133677+ranshid@users.noreply.github.com>
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This special pattern '#' is used to get the element itself,
it does not actually participate in the slot check.
In this case, passing `GET #` will cause '#' to participate
in the slot check, causing the command to get an
`pattern may be in different slots` error.
Signed-off-by: Binbin <binloveplay1314@qq.com>
There is no limitation in Valkey to create a cluster with 1 or 2 primaries,
only that it cannot do automatic failover. Remove this restriction and
add `are you sure` prompt to prompt the user.
This allow we use it to create a test cluster by cli or by
create-cluster.
Signed-off-by: Binbin <binloveplay1314@qq.com>
https://github.com/valkey-io/valkey/issues/1145
First part of a two-step effort to add `WithSlot` API for expiry. This
PR is to fix a crash that occurs when a RANDOMKEY uses a different slot
than the cached slot of a client during a multi-exec.
The next part will be to utilize the new API as an optimization to
prevent duplicate work when calculating the slot for a key.
---------
Signed-off-by: Nadav Levanoni <nadavl@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Nadav Levanoni <nadavl@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
The client that was killed by FUNCTION KILL received a reply of
SCRIPT KILL and the server log also showed SCRIPT KILL.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Sometimes when dual-channel is turned off the tested replica might
disconnect on COB overrun. disable the replica COB limit in order to
prevent such cases.
Fixes: #1153
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
in case of valgrind run, the replica might get disconnected from the
primary due to repl-timeout reached. Fix is to configure larger timeout
in case of valgrind test.
**Partially** fixes: #1152
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Ci report this failure:
```
*** [err]: SHUTDOWN NOSAVE can kill a timedout script anyway in tests/unit/scripting.tcl
Expected 'BUSY Valkey is busy running a script. *' to match '*connection refused*' (context: type eval line 8 cmd {assert_match {*connection refused*} $e} proc ::test)
```
We can see the logs the shutdown got rejected because there is an AOFRW
pending:
```
Writing initial AOF, can't exit.
Errors trying to shut down the server. Check the logs for more information.
```
The reason is that the previous test enabled the aof.
Signed-off-by: Binbin <binloveplay1314@qq.com>
this fixes: https://github.com/valkey-io/valkey/issues/1116
_Issue details from #1116 by @zuiderkwast_
> This config is undocumented since #758. The default was changed to
"yes" and it is quite useless to set it to "no". Yet, it can happen that
some user has an old config file where it is explicitly set to "no". The
result will be bad performace, since I/O threads will not do all the
I/O.
>
> It's indeed confusing.
>
> 1. Either remove the whole option from the code. And thus no need for
documentation. _OR:_
> 2. Introduce the option back in the configuration, just as a comment
is fine. And showing the default value "yes": `# io-threads-do-reads
yes` with additional text.
>
> _Originally posted by @melroy89 in [#1019 (reply in
thread)](https://github.com/orgs/valkey-io/discussions/1019#discussioncomment-10824778)_
---------
Signed-off-by: Shivshankar-Reddy <shiva.sheri.github@gmail.com>
The module commands which were added to acl categories were getting
skipped when `ACL CAT category` command was executed.
This PR fixes the bug.
Before:
```
127.0.0.1:6379> ACL CAT foocategory
(empty array)
```
After:
```
127.0.0.1:6379> ACL CAT foocategory
aclcheck.module.command.test.add.new.aclcategories
```
---------
Signed-off-by: Roshan Khatri <rvkhatri@amazon.com>
Co-authored-by: Harkrishn Patro <bunty.hari@gmail.com>
A new option for diskless replication on the replica side.
After a network failure, the replica may need to perform a full sync.
The other option for diskless full sync is `swapdb`, but it uses twice
as much memory, temporarily. In situations where this is not acceptable,
and where losing data is acceptable, the `flush-before-load` can be
useful. If the full sync fails, the old data is lost though. Therefore,
the new option is marked as "dangerous".
---------
Signed-off-by: kronwerk <ca11e5e22g@gmail.com>
Signed-off-by: kronwerk <kronwerk@users.noreply.github.com>
Co-authored-by: kronwerk <ca11e5e22g@gmail.com>
Currently when module loading fails due to busy name, we
don't have a clean way to assist to troubleshooting.
Case 1: when loading the same module multiple times, we can
not detemine the cause of its failure without referring to
the module list or the earliest module load log. The log
may not exist and sometimes it is difficult for people
to associate module list.
Case 2: when multiple modules use the same module name,
we can not quickly associate the busy name without referring
to the module list and the earliest module load log.
Different people wrote modules with the same module name,
they don't easily associate module name.
So in this PR, when doing module onload, we will try to
print a busy name log if this happen. Currently we check
ctx.module since if it is NULL it means the Init call
failed, and Init currently only fails with busy name.
It's kind of ugly. It would have been nice if we could have had a
better way for onload to signal why the load failed.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Until now, this flag only dumped logs on a failed assert in test case.
It is useful that this flag dumps logs on a crash as well.
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Since a7cbca40661 ("RDMA: Support .is_local method (#1089)"),
valkey-server started to support auto-detect local connection, then we
can use protected mode for local RDMA device for test.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This change counts both solo test executions to give an accurate total number of tests being run.
---------
Signed-off-by: Shivshankar-Reddy <shiva.sheri.github@gmail.com>
Applying the CVEs against mainline.
(CVE-2024-31449) Lua library commands may lead to stack overflow and
potential RCE.
(CVE-2024-31227) Potential Denial-of-service due to malformed ACL
selectors.
(CVE-2024-31228) Potential Denial-of-service due to unbounded pattern
matching.
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Since we paused the primary node earlier, the replica may enter
cluster down due to primary node pfail. Here set allow read to
prevent subsequent read errors.
Signed-off-by: Binbin <binloveplay1314@qq.com>
These two test cases run in a loop:
* AOF rewrite during write load: RDB preamble=yes
* AOF rewrite during write load: RDB preamble=no
Both of the test cases build up a lot of data (3-4 million keys when I
run locally) so we should empty the data before the second test case.
Otherwise, the second test cases adds keys on top of the keys added in
the first test case, resulting in the double number of keys and takes
more time.
Before this commit:
[ok]: AOF rewrite during write load: RDB preamble=yes (18225 ms)
[ok]: AOF rewrite during write load: RDB preamble=no (37249 ms)
After:
[ok]: AOF rewrite during write load: RDB preamble=yes (18777 ms)
[ok]: AOF rewrite during write load: RDB preamble=no (19940 ms)
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Currently cluster tests in unit/cluster are run as part of
the ./runtest. Sometims we change the cluster code and only
want to run cluster tests. This PR added a --cluster option
to runtest so that we can run only cluster tests.
Signed-off-by: Binbin <binloveplay1314@qq.com>
For fake clients like the ones used for Lua and modules, we don't
determine TLS in the right way, causing CLUSTER SLOTS from EVAL over TLS
to fail a debug-assert.
This error was introduced when the caching of CLUSTER SLOTS was
introduced, i.e. in 8.0.0.
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The reason is VM_Call will use a fake client without connection,
so we also need to check if c->conn is NULL.
This also affects scripts. If they are called in the script, the
server will crash. Injecting commands into AOF will also cause
startup failure.
Fixes#1054.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Ci reported this failure:
```
[exception]: Executing test client: ERR FAILOVER target replica is not online..
ERR FAILOVER target replica is not online.
while executing
"$node_0 failover to $node_1_host $node_1_port"
```
We can see somehow the replica is not online in time and
casuing this failure, added a verify_replica_online to make
sure the replica is online for the test.
Signed-off-by: Binbin <binloveplay1314@qq.com>
The one in CLUSTER SETSLOT help us keep track of state better,
of course it also can make the test case happy.
The one in gossip process fixes a problem that a replica can
print a log saying it is an empty primary.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Ping Xie <pingxie@outlook.com>
Apparently there is a timing issue when using wait_for_ofs_sync:
```
[exception]: Executing test client: can't read "out_before": no such variable.
can't read "out_before": no such variable
```
The reason is that if the connection between the primary
and the replica is not established yet, the master_repl_offset
of the primary and replica in wait_for_ofs_sync is 0, and
the check fails, resulting in no replica client in the
client list below.
In this case, we need to make sure the replica is online
before proceeding.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Call emptyData right before rdbLoad to prevent errors in the middle
and we drop the replication stream and leaving an empty database.
The real changes is in disk-based part, the rest is just code movement.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Fix timing issue in evaluating `cluster-allow-replica-migration` for replicas
There is a timing bug where the primary and replica have different
`cluster-allow-replica-migration` settings. In issue #970, we found that if
the replica receives `CLUSTER SETSLOT` before the gossip update, it remains
in the original shard. This happens because we only process the
`cluster-allow-replica-migration` flag for primaries during `CLUSTER SETSLOT`.
This commit fixes the issue by also evaluating this flag for replicas in the
`CLUSTER SETSLOT` path, ensuring correct replica migration behavior.
Closes#970
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Ping Xie <pingxie@outlook.com>
The node may not be able to initiate an election in time due to
problems with cluster communication. If an election is initiated,
make sure its offset is 0.
Closes#967.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Maybe partially resolves https://github.com/valkey-io/valkey/issues/952.
The hostnames test relies on an assumption that node zero and node six
don't communicate with each other to test a bunch of behavior in the
handshake stake. This was done by previously dropping all meet packets,
however it seems like there was some case where node zero was sending a
single pong message to node 6, which was partially initializing the
state.
I couldn't track down why this happened, but I adjusted the test to
simply pause node zero which also correctly emulates the state we want
to be in since we're just testing state on node 6, and removes the
chance of errant messages. The test was failing about 5% of the time
locally, and I wasn't able to reproduce a failure with this new
configuration.
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
In RdbLoad, we disable AOF before emptyData and rdbLoad to prevent copy-on-write issues. After rdbLoad completes, AOF should be re-enabled, but the code incorrectly checks server.aof_state, which has been reset to AOF_OFF in stopAppendOnly. This leads to AOF not being re-enabled after being disabled.
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
Prior to comparing the replica buffer against the configured limit, we
need to ensure that the limit configuration is enabled. If the limit is
set to zero, it indicates that there is no limit, and we should skip the
buffer limit check.
---------
Signed-off-by: naglera <anagler123@gmail.com>
If we modify aof-use-rdb-preamble in the middle of rewrite,
we may get a wrong aof base suffix. This is because the suffix
is concatenated by the main process afterwards, and it may be
different from the beginning.
We cache this value when we start the rewrite.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Implement data masking for user data in server logs and diagnostic output. This change prevents potential exposure of confidential information, such as PII, and enhances privacy protection. It masks all command arguments, client names, and client usernames.
Added a new hide-user-data-from-log configuration item, default yes.
---------
Signed-off-by: Amit Nagler <anagler123@gmail.com>
## Set replica-lazy-flush and lazyfree-lazy-user-flush to yes by
default.
There are many problems with running flush synchronously. Even in
single CPU environments, the thread managers should balance between
the freeing and serving incoming requests.
## Set lazy eviction, expire, server-del, user-del to yes by default
We now have a del and a lazyfree del, we also have these configuration
items to control: lazyfree-lazy-eviction, lazyfree-lazy-expire,
lazyfree-lazy-server-del, lazyfree-lazy-user-del. In most cases lazyfree
is better since it reduces the risk of blocking the main thread, and
because we have lazyfreeGetFreeEffort, on those with high effor
(currently
64) will use lazyfree.
Part of #653.
---------
Signed-off-by: Binbin <binloveplay1314@qq.com>
If the expiration time passed in SET is expired, for example, it
has expired due to the machine time (DTS) or the expiration time
passed in (wrong arg). In this case, we don't need to set the key
and wait for the active expire scan before deleting the key.
Compared with previous changes:
1. If the key does not exist, previously we would set the key and wait
for the active expire to delete it, so it is a set + del from the
perspective
of propaganda. Now we will no set the key and return, so it a NOP.
2. If the key exists, previously we woule set the key and wait
for the active expire to delete it, so it is a set + del From the
perspective
of propaganda. Now we will delete it and return, so it is a del.
Adding a new deleteExpiredKeyFromOverwriteAndPropagate function
to reduce the duplicate code.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
The reason is the server 3 still have the server 7 as its replica
due to a short wait, the wait is not enough, we should wait for
server loss its replica.
```
*** [err]: valkey-cli make source node ignores NOREPLICAS error when doing the last CLUSTER SETSLOT
Expected '{127.0.0.1 21497 267}' to be equal to '' (context: type eval line 34 cmd {assert_equal [lindex [R 3 role] 2] {}} proc ::test)
```
Signed-off-by: Binbin <binloveplay1314@qq.com>
In standalone mode, when a `-REDIRECT` error occurs, special handling is
required if the client is in the `MULTI` context.
We have adopted the same handling method as the cluster mode:
1. If a command in the transaction encounters a `REDIRECT` at the time
of queuing, the execution of `EXEC` will return an `EXECABORT` error (we
expect the client to redirect and discard the transaction upon receiving
a `REDIRECT`). That is:
```
MULTI ==> +OK
SET x y ==> -REDIRECT
EXEC ==> -EXECABORT
```
2. If all commands are successfully queued (i.e., `QUEUED` results are
received) but a redirect is detected during `EXEC` execution (such as a
primary-replica switch), a `REDIRECT` is returned to instruct the client
to perform a redirect. That is:
```
MULTI ==> +OK
SET x y ==> +QUEUED
failover
EXEC ==> -REDIRECT
```
---------
Signed-off-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
When reconfiguring sub-replica, there may a case that the sub-replica will
use the old offset and win the election and cause the data loss if the old
primary went down.
In this case, sender is myself's primary, when executing updateShardId,
not only the sender's shard_id is updated, but also the shard_id of
myself is updated, casuing the subsequent areInSameShard check, that is,
the full_sync_required check to fail.
As part of the recent fix of #885, the sub-replica needs to decide whether
a full sync is required or not when switching shards. This shard membership
check is supposed to be done against sub-replica's current shard_id, which
however was lost in this code path. This then leads to sub-replica joining
the other shard with a completely different and incorrect replication history.
This is the only place where replicaof state can be updated on this path
so the most natural fix would be to pull the chain replication reduction
logic into this code block and before the updateShardId call.
This one follow #885 and closes#942.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Ping Xie <pingxie@outlook.com>
Fix a bug in isValidAuxChar where valid characters '.' and ':' were
incorrectly included in the banned charset. This issue affected the
validation of auxiliary fields in the nodes.conf file used by Valkey in
cluster mode, particularly when handling IPv4 and IPv6 addresses. The
code now correctly allows '.' and ':' as valid characters, ensuring
proper handling of these fields. Comments were added to clarify the use
of the banned charset.
Related to #736
---------
Signed-off-by: Ping Xie <pingxie@google.com>
In #792, the time complexity became ambiguous, fluctuating between
O(1) and O(n), which is a significant difference. And we agree uncertainty
can potentially bring disaster to the business, the right thing to do is
to persuade users to use EXISTS instead of KEYS in this case, to do the
right thing the right way, rather than accommodating this incorrect usage.
This reverts commit d66a06e8183818c035bb78706f46fd62645db07e.
This reverts #792.
Signed-off-by: Binbin <binloveplay1314@qq.com>
