## Description
When I explore the cycles distributions for `lrange` test (
`valkey-benchmark -p 9001 -t lrange -d 100 -r 1000000 -n 1000000 -c 50
--threads 4`). I found the `prepareClientToWrite` and
`clientHasPendingReplies` could be reduced to single call outside
instead of called in a loop, ideally we can gain 3% performance. The
corresponding `LRANG_100`, `LRANG_300`, `LRANGE_500`, `LRANGE_600` have
~2% - 3% performance boost, the benchmark test prove it helps.
This patch try to move the `prepareClientToWrite` and its child
`clientHasPendingReplies` out of the loop to reduce the function
overhead.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
sdsAllocSize returns the correct size without consulting the
allocator. Which is much faster than consulting the allocator.
The only exception is SDS_TYPE_5, for which it has to
consult the allocator.
This PR also sets alloc field correctly for embedded string objects.
It assumes that no allocator would allocate a buffer larger
than `259 + sizeof(robj)` for embedded string. We use embedded strings
for strings up to 44 bytes. If this assumption is wrong, the whole
function would require a rewrite. In general case sds type adjustment
might be needed. Such logic should go to sds.c.
---------
Signed-off-by: Vadym Khoptynets <vadymkh@amazon.com>
This PR utilizes the IO threads to execute commands in batches, allowing
us to prefetch the dictionary data in advance.
After making the IO threads asynchronous and offloading more work to
them in the first 2 PRs, the `lookupKey` function becomes a main
bottle-neck and it takes about 50% of the main-thread time (Tested with
SET command). This is because the Valkey dictionary is a straightforward
but inefficient chained hash implementation. While traversing the hash
linked lists, every access to either a dictEntry structure, pointer to
key, or a value object requires, with high probability, an expensive
external memory access.
### Memory Access Amortization
Memory Access Amortization (MAA) is a technique designed to optimize the
performance of dynamic data structures by reducing the impact of memory
access latency. It is applicable when multiple operations need to be
executed concurrently. The principle behind it is that for certain
dynamic data structures, executing operations in a batch is more
efficient than executing each one separately.
Rather than executing operations sequentially, this approach interleaves
the execution of all operations. This is done in such a way that
whenever a memory access is required during an operation, the program
prefetches the necessary memory and transitions to another operation.
This ensures that when one operation is blocked awaiting memory access,
other memory accesses are executed in parallel, thereby reducing the
average access latency.
We applied this method in the development of `dictPrefetch`, which takes
as parameters a vector of keys and dictionaries. It ensures that all
memory addresses required to execute dictionary operations for these
keys are loaded into the L1-L3 caches when executing commands.
Essentially, `dictPrefetch` is an interleaved execution of dictFind for
all the keys.
**Implementation details**
When the main thread iterates over the `clients-pending-io-read`, for
clients with ready-to-execute commands (i.e., clients for which the IO
thread has parsed the commands), a batch of up to 16 commands is
created. Initially, the command's argv, which were allocated by the IO
thread, is prefetched to the main thread's L1 cache. Subsequently, all
the dict entries and values required for the commands are prefetched
from the dictionary before the command execution. Only then will the
commands be executed.
---------
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
This example was for script replication which we have
completely removed in 7.0, so this example is outdated now.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Saves some memory (one pointer) in the client struct.
Since a client cannot be blocked multiple times, we can assume
it will be held in only one extra utility list, so it is ok to maintain
a union of these listNode references.
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Signed-off-by: ranshid <88133677+ranshid@users.noreply.github.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Update references of copyright being assigned to Salvatore when it was
transferred to Redis Ltd. as per
https://github.com/valkey-io/valkey/issues/544.
---------
Signed-off-by: Pieter Cailliau <pieter@redis.com>
- Fix TLS bug where connection were shutdown by primary's main process
while the child process was still writing- causing main process to be
blocked.
- TLS connection fix -file descriptors are set to blocking mode in the
main thread, followed by a blocking write. This sets the file
descriptors to non-blocking if TLS is used (see `connTLSSyncWrite()`)
(@xbasel).
- Improve the reliability of dual-channel tests. Modify the pause
mechanism to verify process status directly, rather than relying on log.
- Ensure that `server.repl_offset` and `server.replid` are updated
correctly when dual channel synchronization completes successfully.
Thist led to failures in replication tests that validate replication IDs
or compare replication offsets.
---------
Signed-off-by: naglera <anagler123@gmail.com>
Signed-off-by: naglera <58042354+naglera@users.noreply.github.com>
Signed-off-by: xbasel <103044017+xbasel@users.noreply.github.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: ranshid <88133677+ranshid@users.noreply.github.com>
Co-authored-by: xbasel <103044017+xbasel@users.noreply.github.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
When debug assert mode enabled, verify that we don't insert the same
client twice into server.clients_to_close.
Signed-off-by: naglera <anagler123@gmail.com>
Fix bug in writeToClient
In https://github.com/valkey-io/valkey/pull/758, a major refactor was
done to `networking.c`.
As part of this refactor, a new bug was introduced: we don't advance the
`c->buf` pointer in repeated writes.
This bug should be very unlikely to manifest, as it requires the
client's TCP buffer to be filled in the first try and then released
immediately after in the second try.
Despite all my efforts to reproduce this scenario, I was unable to do
so.
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
Adds two new metrics for per-slot statistics, network-bytes-in and
network-bytes-out. The network bytes are inclusive of replication bytes
but exclude other types of network traffic such as clusterbus traffic.
#### network-bytes-in
The metric tracks network ingress bytes under per-slot context, by
reverse calculation of `c->argv_len_sum` and `c->argc`, stored under a
newly introduced field `c->net_input_bytes_curr_cmd`.
#### network-bytes-out
The metric tracks network egress bytes under per-slot context, by
hooking onto COB buffer mutations.
#### sample response
Both metrics are reported under the `CLUSTER SLOT-STATS` command.
```
127.0.0.1:6379> cluster slot-stats slotsrange 0 0
1) 1) (integer) 0
2) 1) "key-count"
2) (integer) 0
3) "cpu-usec"
4) (integer) 0
5) "network-bytes-in"
6) (integer) 0
7) "network-bytes-out"
8) (integer) 0
```
---------
Signed-off-by: Kyle Kim <kimkyle@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Introduce several improvements to improve the stability of dual-channel
replication and fix compatibility issues.
1. Make dual-channel-replication tests more reliable: use pause instead
of forced sleep.
2. Fix race conditions when freeing RDB client.
3. Check if sync was stopped during local buffer streaming.
4. Fix $ENDOFFSET reply format to work on 32-bit machines too.
---------
Signed-off-by: naglera <anagler123@gmail.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
### IO-Threads Work Offloading
This PR is the 2nd of 3 PRs intended to achieve the goal of 1M requests
per second.
(1st PR: https://github.com/valkey-io/valkey/pull/758)
This PR offloads additional work to the I/O threads, beyond the current
read-parse/write operations, to better utilize the I/O threads and
reduce the load on the main thread.
It contains the following 3 commits:
### Poll Offload
Currently, the main thread is responsible for executing the poll-wait
system call, while the IO threads wait for tasks from the main thread.
The poll-wait operation is expensive and can consume up to 30% of the
main thread's time. We could have let the IO threads do the poll-wait by
themselves, with each thread listening to some of the clients and
notifying the main thread when a client's command is ready to execute.
However, the current approach, where the main thread listens for events
from the network, has several benefits. The main thread remains in
charge, allowing it to know the state of each client
(idle/read/write/close) at any given time. Additionally, it makes the
threads flexible, enabling us to drain an IO thread's job queue and stop
a thread when the load is light without modifying the event loop and
moving its clients to a different IO thread. Furthermore, with this
approach, the IO threads don't need to wait for both messages from the
network and from the main thread instead, the threads wait only for
tasks from the main thread.
To enjoy the benefits of both the main thread remaining in charge and
the poll being offloaded, we propose offloading the poll-wait as a
single-time, non-blocking job to one of the IO threads. The IO thread
will perform a poll-wait non-blocking call while the main thread
processes the client commands. Later, in `aeProcessEvents`, instead of
sleeping on the poll, we check for the IO thread's poll-wait results.
The poll-wait will be offloaded in `beforeSleep` only when there are
ready events for the main thread to process. If no events are pending,
the main thread will revert to the current behavior and sleep on the
poll by itself.
**Implementation Details**
A new call back `custompoll` was added to the `aeEventLoop` when not set
to `NULL` the ae will call the `custompoll` callback instead of the
`aeApiPoll`.
When the poll is offloaded we will set the `custompoll` to
`getIOThreadPollResults` and send a poll-job to the thread. the thread
will take a mutex, call a non-blocking (with timeout 0) to `aePoll`
which will populate the fired events array. the IO thread will set the
`server.io_fired_events` to the number of the returning `numevents`,
later the main-thread in `custompoll` will return the
`server.io_fired_events` and will set the `customPoll` back to `NULL`.
To ensure thread safety when accessing server.el, all functions that
modify the eventloop events were wrapped with a mutex to ensure mutual
exclusion when modifying the events.
### Command Lookup Offload
As the IO thread parses the command from the client's Querybuf, it can
perform a command lookup in the commands dictionary, which can consume
up to ~5% of the main-thread runtime.
**Implementation details**
The IO thread will store the looked-up command in the client's new field
`io_parsed_cmd` field. We can't use `c->cmd` for that since we use
`c->cmd `to check if a command was reprocessed or not.
To ensure thread safety when accessing the command dictionary, we make
sure the main thread isn't changing the dictionary while IO threads are
accessing it. This is accomplished by introducing a new flag called
`no_incremental_rehash` for the `dictType` commands. When performing
`dictResize`, we will rehash the entire dictionary in place rather than
deferring the process.
### Free Offload
Since the command arguments are allocated by the I/O thread, it would be
beneficial if they were also freed by the same thread. If the main
thread frees objects allocated by the I/O thread, two issues arise:
1. During the freeing process, the main thread needs to access the SDS
pointed to by the object to get its length.
2. With Jemalloc, each thread manages thread local pool (`tcache`) of
buffers for quick reallocation without accessing the arena. If the main
thread constantly frees objects allocated by other threads, those
threads will have to frequently access the shared arena to obtain new
memory allocations
**Implementation Details**
When freeing the client's argv, we will send the argv array to the
thread that allocated it. The thread will be identified by the client
ID. When freeing an object during `dbOverwrite`, we will offload the
object free as well. We will extend this to offload the free during
`dbDelete` in a future PR, as its effects on defrag/memory evictions
need to be studied.
---------
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
Primary side: Remove read handler upon RDB connection close.
At this stage we do not expect any writed form that connection
so it should be safe to remove the read handler. Otherwise the
read handler will keep printing the `Client closed connection`
logs, see handleReadResult.
Signed-off-by: naglera <anagler123@gmail.com>
In this PR we introduce the main benefit of dual channel replication by
continuously steaming the COB (client output buffers) in parallel to the
RDB and thus keeping the primary's side COB small AND accelerating the
overall sync process. By streaming the replication data to the replica
during the full sync, we reduce
1. Memory load from the primary's node.
2. CPU load from the primary's main process. [Latest performance
tests](#data)
## Motivation
* Reduce primary memory load. We do that by moving the COB tracking to
the replica side. This also decrease the chance for COB overruns. Note
that primary's input buffer limits at the replica side are less
restricted then primary's COB as the replica plays less critical part in
the replication group. While increasing the primary’s COB may end up
with primary reaching swap and clients suffering, at replica side we’re
more at ease with it. Larger COB means better chance to sync
successfully.
* Reduce primary main process CPU load. By opening a new, dedicated
connection for the RDB transfer, child processes can have direct access
to the new connection. Due to TLS connection restrictions, this was not
possible using one main connection. We eliminate the need for the child
process to use the primary's child-proc -> main-proc pipeline, thus
freeing up the main process to process clients queries.
## Dual Channel Replication high level interface design
- Dual channel replication begins when the replica sends a `REPLCONF
CAPA DUALCHANNEL` to the primary during initial
handshake. This is used to state that the replica is capable of dual
channel sync and that this is the replica's main channel, which is not
used for snapshot transfer.
- When replica lacks sufficient data for PSYNC, the primary will send
`-FULLSYNCNEEDED` response instead
of RDB data. As a next step, the replica creates a new connection
(rdb-channel) and configures it against
the primary with the appropriate capabilities and requirements. The
replica then requests a sync
using the RDB channel.
- Prior to forking, the primary sends the replica the snapshot's end
repl-offset, and attaches the replica
to the replication backlog to keep repl data until the replica requests
psync. The replica uses the main
channel to request a PSYNC starting at the snapshot end offset.
- The primary main threads sends incremental changes via the main
channel, while the bgsave process
sends the RDB directly to the replica via the rdb-channel. As for the
replica, the incremental
changes are stored on a local buffer, while the RDB is loaded into
memory.
- Once the replica completes loading the rdb, it drops the
rdb-connection and streams the accumulated incremental
changes into memory. Repl steady state continues normally.
## New replica state machine
## Data <a name="data"></a>
## Explanation
These graphs demonstrate performance improvements during full sync
sessions using rdb-channel + streaming rdb directly from the background
process to the replica.
First graph- with at most 50 clients and light weight commands, we saw
5%-7.5% improvement in write latency during sync session.
Two graphs below- full sync was tested during heavy read commands from
the primary (such as sdiff, sunion on large sets). In that case, the
child process writes to the replica without sharing CPU with the loaded
main process. As a result, this not only improves client response time,
but may also shorten sync time by about 50%. The shorter sync time
results in less memory being used to store replication diffs (>60% in
some of the tested cases).
## Test setup
Both primary and replica in the performance tests ran on the same
machine. RDB size in all tests is 3.7gb. I generated write load using
valkey-benchmark ` ./valkey-benchmark -r 100000 -n 6000000 lpush my_list
__rand_int__`.
---------
Signed-off-by: naglera <anagler123@gmail.com>
Signed-off-by: naglera <58042354+naglera@users.noreply.github.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Ping Xie <pingxie@outlook.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Implementing the change proposed here:
https://github.com/valkey-io/valkey/issues/487
In this PR, we prevent tracking new custom error messages (e.g. LUA) if
the number of error messages (in the errors RAX) is greater than 128.
Instead, we will track any additional custom error prefix in a new
counter: `errorstat_ERRORSTATS_OVERFLOW ` and if any non-custom flagged
errors (e.g. MOVED / CLUSTERDOWN) occur, they will continue to be
tracked as usual.
This will address the issue of spammed error messages / memory usage of
the errors RAX. Additionally, we will not have to execute `CONFIG
RESETSTAT` to restore error stats functionality because normal error
messages continue to be tracked.
Example:
```
# Errorstats
.
.
.
errorstat_127:count=2
errorstat_128:count=2
errorstat_ERR:count=1
errorstat_ERRORSTATS_OVERFLOW:count=2
```
---------
Signed-off-by: Karthik Subbarao <karthikrs2021@gmail.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
New configs:
* `cluster-announce-client-ipv4`
* `cluster-announce-client-ipv6`
New module API function:
* `ValkeyModule_GetClusterNodeInfoForClient`, takes a client id and is
otherwise just like its non-ForClient cousin.
If configured, one of these IP addresses are reported to each client in
CLUSTER SLOTS, CLUSTER SHARDS, CLUSTER NODES and redirects, replacing
the IP (`custer-announce-ip` or the auto-detected IP) of each node.
Which one is reported to the client depends on whether the client is
connected over IPv4 or IPv6.
Benefits:
* This allows clients using IPv4 to get the IPv4 addresses of all
cluster nodes and IPv6 clients to get the IPv6 clients.
* This allows the IPs visible to clients to be different to the IPs used
between the cluster nodes due to NAT'ing.
The information is propagated in the cluster bus using new Ping
extensions. (Old nodes without this feature ignore unknown Ping
extensions.)
This adds another dimension to CLUSTER SLOTS reply. It now depends on
the client's use of TLS, the IP address family and RESP version.
Refactoring: The cached connection type definition is moved from
connection.h (it actually has nothing to do with the connection
abstraction) to server.h and is changed to a bitmap, with one bit for
each of TLS, IPv6 and RESP3.
Fixes#337
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This PR is 1 of 3 PRs intended to achieve the goal of 1 million requests
per second, as detailed by [dan touitou](https://github.com/touitou-dan)
in https://github.com/valkey-io/valkey/issues/22. This PR modifies the
IO threads to be fully asynchronous, which is a first and necessary step
to allow more work offloading and better utilization of the IO threads.
### Current IO threads state:
Valkey IO threads were introduced in Redis 6.0 to allow better
utilization of multi-core machines. Before this, Redis was
single-threaded and could only use one CPU core for network and command
processing. The introduction of IO threads helps in offloading the IO
operations to multiple threads.
**Current IO Threads flow:**
1. Initialization: When Redis starts, it initializes a specified number
of IO threads. These threads are in addition to the main thread, each
thread starts with an empty list, the main thread will populate that
list in each event-loop with pending-read-clients or
pending-write-clients.
2. Read Phase: The main thread accepts incoming connections and reads
requests from clients. The reading of requests are offloaded to IO
threads. The main thread puts the clients ready-to-read in a list and
set the global io_threads_op to IO_THREADS_OP_READ, the IO threads pick
the clients up, perform the read operation and parse the first incoming
command.
3. Command Processing: After reading the requests, command processing is
still single-threaded and handled by the main thread.
4. Write Phase: Similar to the read phase, the write phase is also be
offloaded to IO threads. The main thread prepares the response in the
clients’ output buffer then the main thread puts the client in the list,
and sets the global io_threads_op to the IO_THREADS_OP_WRITE. The IO
threads then pick the clients up and perform the write operation to send
the responses back to clients.
5. Synchronization: The main-thread communicate with the threads on how
many jobs left per each thread with atomic counter. The main-thread
doesn’t access the clients while being handled by the IO threads.
**Issues with current implementation:**
* Underutilized Cores: The current implementation of IO-threads leads to
the underutilization of CPU cores.
* The main thread remains responsible for a significant portion of
IO-related tasks that could be offloaded to IO-threads.
* When the main-thread is processing client’s commands, the IO threads
are idle for a considerable amount of time.
* Notably, the main thread's performance during the IO-related tasks is
constrained by the speed of the slowest IO-thread.
* Limited Offloading: Currently, Since the Main-threads waits
synchronously for the IO threads, the Threads perform only read-parse,
and write operations, with parsing done only for the first command. If
the threads can do work asynchronously we may offload more work to the
threads reducing the load from the main-thread.
* TLS: Currently, we don't support IO threads with TLS (where offloading
IO would be more beneficial) since TLS read/write operations are not
thread-safe with the current implementation.
### Suggested change
Non-blocking main thread - The main thread and IO threads will operate
in parallel to maximize efficiency. The main thread will not be blocked
by IO operations. It will continue to process commands independently of
the IO thread's activities.
**Implementation details**
**Inter-thread communication.**
* We use a static, lock-free ring buffer of fixed size (2048 jobs) for
the main thread to send jobs and for the IO to receive them. If the ring
buffer fills up, the main thread will handle the task itself, acting as
back pressure (in case IO operations are more expensive than command
processing). A static ring buffer is a better candidate than a dynamic
job queue as it eliminates the need for allocation/freeing per job.
* An IO job will be in the format: ` [void* function-call-back | void
*data] `where data is either a client to read/write from and the
function-ptr is the function to be called with the data for example
readQueryFromClient using this format we can use it later to offload
other types of works to the IO threads.
* The Ring buffer is one way from the main-thread to the IO thread, Upon
read/write event the main thread will send a read/write job then in
before sleep it will iterate over the pending read/write clients to
checking for each client if the IO threads has already finished handling
it. The IO thread signals it has finished handling a client read/write
by toggling an atomic flag read_state / write_state on the client
struct.
**Thread Safety**
As suggested in this solution, the IO threads are reading from and
writing to the clients' buffers while the main thread may access those
clients.
We must ensure no race conditions or unsafe access occurs while keeping
the Valkey code simple and lock free.
Minimal Action in the IO Threads
The main change is to limit the IO thread operations to the bare
minimum. The IO thread will access only the client's struct and only the
necessary fields in this struct.
The IO threads will be responsible for the following:
* Read Operation: The IO thread will only read and parse a single
command. It will not update the server stats, handle read errors, or
parsing errors. These tasks will be taken care of by the main thread.
* Write Operation: The IO thread will only write the available data. It
will not free the client's replies, handle write errors, or update the
server statistics.
To achieve this without code duplication, the read/write code has been
refactored into smaller, independent components:
* Functions that perform only the read/parse/write calls.
* Functions that handle the read/parse/write results.
This refactor accounts for the majority of the modifications in this PR.
**Client Struct Safe Access**
As we ensure that the IO threads access memory only within the client
struct, we need to ensure thread safety only for the client's struct's
shared fields.
* Query Buffer
* Command parsing - The main thread will not try to parse a command from
the query buffer when a client is offloaded to the IO thread.
* Client's memory checks in client-cron - The main thread will not
access the client query buffer if it is offloaded and will handle the
querybuf grow/shrink when the client is back.
* CLIENT LIST command - The main thread will busy-wait for the IO thread
to finish handling the client, falling back to the current behavior
where the main thread waits for the IO thread to finish their
processing.
* Output Buffer
* The IO thread will not change the client's bufpos and won't free the
client's reply lists. These actions will be done by the main thread on
the client's return from the IO thread.
* bufpos / block→used: As the main thread may change the bufpos, the
reply-block→used, or add/delete blocks to the reply list while the IO
thread writes, we add two fields to the client struct: io_last_bufpos
and io_last_reply_block. The IO thread will write until the
io_last_bufpos, which was set by the main-thread before sending the
client to the IO thread. If more data has been added to the cob in
between, it will be written in the next write-job. In addition, the main
thread will not trim or merge reply blocks while the client is
offloaded.
* Parsing Fields
* Client's cmd, argc, argv, reqtype, etc., are set during parsing.
* The main thread will indicate to the IO thread not to parse a cmd if
the client is not reset. In this case, the IO thread will only read from
the network and won't attempt to parse a new command.
* The main thread won't access the c→cmd/c→argv in the CLIENT LIST
command as stated before it will busy wait for the IO threads.
* Client Flags
* c→flags, which may be changed by the main thread in multiple places,
won't be accessed by the IO thread. Instead, the main thread will set
the c→io_flags with the information necessary for the IO thread to know
the client's state.
* Client Close
* On freeClient, the main thread will busy wait for the IO thread to
finish processing the client's read/write before proceeding to free the
client.
* Client's Memory Limits
* The IO thread won't handle the qb/cob limits. In case a client crosses
the qb limit, the IO thread will stop reading for it, letting the main
thread know that the client crossed the limit.
**TLS**
TLS is currently not supported with IO threads for the following
reasons:
1. Pending reads - If SSL has pending data that has already been read
from the socket, there is a risk of not calling the read handler again.
To handle this, a list is used to hold the pending clients. With IO
threads, multiple threads can access the list concurrently.
2. Event loop modification - Currently, the TLS code
registers/unregisters the file descriptor from the event loop depending
on the read/write results. With IO threads, multiple threads can modify
the event loop struct simultaneously.
3. The same client can be sent to 2 different threads concurrently
(https://github.com/redis/redis/issues/12540).
Those issues were handled in the current PR:
1. The IO thread only performs the read operation. The main thread will
check for pending reads after the client returns from the IO thread and
will be the only one to access the pending list.
2. The registering/unregistering of events will be similarly postponed
and handled by the main thread only.
3. Each client is being sent to the same dedicated thread (c→id %
num_of_threads).
**Sending Replies Immediately with IO threads.**
Currently, after processing a command, we add the client to the
pending_writes_list. Only after processing all the clients do we send
all the replies. Since the IO threads are now working asynchronously, we
can send the reply immediately after processing the client’s requests,
reducing the command latency. However, if we are using AOF=always, we
must wait for the AOF buffer to be written, in which case we revert to
the current behavior.
**IO threads dynamic adjustment**
Currently, we use an all-or-nothing approach when activating the IO
threads. The current logic is as follows: if the number of pending write
clients is greater than twice the number of threads (including the main
thread), we enable all threads; otherwise, we enable none. For example,
if 8 IO threads are defined, we enable all 8 threads if there are 16
pending clients; else, we enable none.
It makes more sense to enable partial activation of the IO threads. If
we have 10 pending clients, we will enable 5 threads, and so on. This
approach allows for a more granular and efficient allocation of
resources based on the current workload.
In addition, the user will now be able to change the number of I/O
threads at runtime. For example, when decreasing the number of threads
from 4 to 2, threads 3 and 4 will be closed after flushing their job
queues.
**Tests**
Currently, we run the io-threads tests with 4 IO threads
(443d80f168/.github/workflows/daily.yml (L353)).
This means that we will not activate the IO threads unless there are 8
(threads * 2) pending write clients per single loop, which is unlikely
to happened in most of tests, meaning the IO threads are not currently
being tested.
To enforce the main thread to always offload work to the IO threads,
regardless of the number of pending events, we add an
events-per-io-thread configuration with a default value of 2. When set
to 0, this configuration will force the main thread to always offload
work to the IO threads.
When we offload every single read/write operation to the IO threads, the
IO-threads are running with 100% CPU when running multiple tests
concurrently some tests fail as a result of larger than expected command
latencies. To address this issue, we have to add some after or wait_for
calls to some of the tests to ensure they pass with IO threads as well.
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
#### Description
This patch try to introduce a thread-local storage variable for each
thread to update its own `used_memory`, and then sum them together when
reading in `zmalloc_used_memory`. Then we can reduce unnecessary `lock
add` contention from atomic variable. We also add a protection if too
many threads created and the total threads number greater than 132, then
fall back to atomic operation for the threads index >= 132.
#### Problem Statement
`zmalloc` and `zfree` related functions will update the `used_memory`
atomicity for each operation, and they are called very frequency. From
the benchmark of
[memtier_benchmark-1Mkeys-load-stream-5-fields-with-100B-values-pipeline-10.yml](https://github.com/redis/redis-benchmarks-specification/blob/main/redis_benchmarks_specification/test-suites/memtier_benchmark-1Mkeys-load-stream-5-fields-with-100B-values-pipeline-10.yml)
, the cycles ratio of `zmalloc` and `zfree` are high, they are wrappers
for the lower allocator library, it should not take too much cycles. And
most of the cycles are contributed by `lock add` and `lock sub` , they
are expensive instructions. From the profiling, the metrics' update
mainly come from the main thread, use a TLS will reduce a lot of
contention.
#### Performance Boost
**Note:** This optimization should benefit common benchmark widely. I
choose below 2 scenarios to validate the performance boost in my local
environment.
| Test Suites | Performance Boost |
|-|-|
|[memtier_benchmark-1Mkeys-load-stream-5-fields-with-100B-values-pipeline-10](https://github.com/redis/redis-benchmarks-specification/blob/main/redis_benchmarks_specification/test-suites/memtier_benchmark-1Mkeys-load-stream-5-fields-with-100B-values-pipeline-10.yml)|8%|
|[memtier_benchmark-1Mkeys-load-string-with-100B-values-pipeline-10](https://github.com/redis/redis-benchmarks-specification/blob/main/redis_benchmarks_specification/test-suites/memtier_benchmark-1Mkeys-load-string-with-100B-values-pipeline-10.yml)|4%|
##### Test Env
- OS: Ubuntu 22.04.4 LTS
- Platform: Intel Xeon Platinum 8380
- Server and Client in same socket
##### Start Server
```sh
taskset -c 0-3 ~/valkey/src/valkey-server /tmp/valkey_1.conf
port 9001
bind * -::*
daemonize yes
protected-mode no
save ""
```
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Co-authored-by: Wangyang Guo <wangyang.guo@intel.com>
To implement #319
1. replica is able to redirect read and write commands to it's primary
in standalone mode
* reply with "-REDIRECT primary-ip:port"
2. add a subcommand `CLIENT CAPA redirect`, a client can announce the
capability to handle redirection
* if a client can handle redirection, the data access commands (read and
write) will be redirected
3. allow `readonly` and `readwrite` command in standalone mode, may be a
breaking change
* a client with redirect capability cannot process read commands on a
replica by default
* use READONLY command can allow read commands on a replica
---------
Signed-off-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
## Description
While exploring hotspots with profiling some benchmark workloads, we
noticed the high cycles ratio of `prepareClientToWrite`, taking about 9%
of the CPU of `smembers`, `lrange` commands. After deep dive the code
logic, we thought we can gain the performance by reducing the redundant
call of `prepareClientToWrite` when call addReply* continuously.
For example: In
https://github.com/valkey-io/valkey/blob/unstable/src/networking.c#L1080-L1082,
`prepareClientToWrite` is called three times in a row.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Co-authored-by: Wangyang Guo <wangyang.guo@intel.com>
We added some clang-format off comments before we had decided on the
format configuration. Now, it turns out that turning formatting off is
often not necessary.
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
More rebranding of
* Log messages (#252)
* The DENIED error reply
* Internal function names and comments, mainly Lua API
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
There are currently three block types: BLOCKED_WAIT, BLOCKED_WAITAOF,
and BLOCKED_WAIT_PREREPL, used to block clients executing `WAIT`,
`WAITAOF`, and `CLUSTER SETSLOT`, respectively. They share the same
workflow: the client is blocked until replication to the expected number
of replicas completes. However, they provide different responses
depending on the commands involved. Using distinct block types leads to
code duplication and reduced readability. This PR consolidates the three
types into a single WAIT type, differentiating them using the pending
command to ensure the appropriate response is returned.
Fix#427
---------
Signed-off-by: Ping Xie <pingxie@google.com>
This PR optimizes client query buffer handling in Valkey by introducing
a shared query buffer that is used by default for client reads. This
reduces memory usage by ~20KB per client by avoiding allocations for
most clients using short (<16KB) complete commands. For larger or
partial commands, the client still gets its own private buffer.
The primary changes are:
* Adding a shared query buffer `shared_qb` that clients use by default
* Modifying client querybuf initialization and reset logic
* Copying any partial query from shared to private buffer before command
execution
* Freeing idle client query buffers when empty to allow reuse of shared
buffer
* Master client query buffers are kept private as their contents need to
be preserved for replication stream
In addition to the memory savings, this change shows a 3% improvement in
latency and throughput when running with 1000 active clients.
The memory reduction may also help reduce the need to evict clients when
reaching max memory limit, as the query buffer is the main memory
consumer per client.
---------
Signed-off-by: Uri Yagelnik <uriy@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
The replica sends its version when initiating replication, in
pipeline with other REPLCONF commands.
The primary stores it in the client struct. Other fields are made
smaller to avoid making the client struct consume more memory.
Fixes#414.
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
- Replaces custom atomics logic with C11 default atomics logic.
- Drops "atomicvar_api" field from server info
Closes#485
---------
Signed-off-by: adetunjii <adetunjithomas1@outlook.com>
Signed-off-by: Samuel Adetunji <adetunjithomas1@outlook.com>
Co-authored-by: teej4y <samuel.adetunji@prunny.com>
I have validated that these settings closely match the existing coding
style with one major exception on `BreakBeforeBraces`, which will be
`Attach` going forward. The mixed `BreakBeforeBraces` styles in the
current codebase are hard to imitate and also very odd IMHO - see below
```
if (a == 1) { /*Attach */
}
```
```
if (a == 1 ||
b == 2)
{ /* Why? */
}
```
Please do NOT merge just yet. Will add the github action next once the
style is reviewed/approved.
---------
Signed-off-by: Ping Xie <pingxie@google.com>
This commit adds a logic to cache `CLUSTER SLOTS` response for reduced
latency and also updates the cache when a change in the cluster is
detected.
Historically, `CLUSTER SLOTS` command was deprecated, however all the
server clients have been using `CLUSTER SLOTS` and have not migrated to
`CLUSTER SHARDS`. In future this logic can be added to any other
commands to improve the performance of the engine.
---------
Signed-off-by: Roshan Khatri <rvkhatri@amazon.com>
This is a preparation for adding clang-format.
These comments prevent automatic formatting in some places. With these
exceptions, we will be able to run clang-format on the rest of the code.
This is a preparation for #323.
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
We already have global stats for input traffic, output traffic and how
many commands have been executed.
However, some users have the difficulty of locating the IP(s) which have
heavy network traffic. So here some stats for single client are
introduced.
```
tot-net-in // Total network input bytes read from the client
tot-net-out // Total network output bytes sent to the client
tot-cmds // Total commands the client has executed
```
These three stats are shown in `CLIENT LIST` and `CLIENT INFO`.
Though the metrics are handled in hot paths of the code, personally I
don't think it will slow down the server. Considering all other complex
operations handled nearby, this is only a small and simple operation.
However we do need to be cautious when adding more and more metrics, as
discussed in redis/redis#12640, we may need to find a way to tell
whether this has obvious performance degradation.
---------
Signed-off-by: Chen Tianjie <TJ_Chen@outlook.com>
This patch try to do following things:
1. Rename `redis_*` and `REDIS_*` macros defined in config.h to
`valkey_*`, `VALKEY_*` and update associated used files. (`redis_fstat`,
`redis_fsync`, `REDIS_THREAD_STACK_SIZE`, etc.)
2. Remove the leading double underscore for guard macro in config.h.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
New config 'extended-redis-compatibility' (yes/no) default no
* When yes:
* Use "Redis" in the following error replies:
- `-LOADING Redis is loading the dataset in memory`
- `-BUSY Redis is busy`...
- `-MISCONF Redis is configured to`...
* Use `=== REDIS BUG REPORT` in the crash log delimiters (START and
END).
* The HELLO command returns `"server" => "redis"` and `"version" =>
"7.2.4"` (our Redis OSS compatibility version).
* The INFO field for mode is called `"redis_mode"`.
* When no:
* Use "Valkey" instead of "Redis" in the mentioned errors and crash log
delimiters.
* The HELLO command returns `"server" => "valkey"` and the Valkey
version for `"version"`.
* The INFO field for mode is called `"server_mode"`.
* Documentation added in valkey.conf:
> Valkey is largely compatible with Redis OSS, apart from a few cases
where
> Redis OSS compatibility mode makes Valkey pretend to be Redis. Enable
this
> only if you have problems with tools or clients. This is a temporary
> configuration added in Valkey 8.0 and is scheduled to have no effect
in Valkey
> 9.0 and be completely removed in Valkey 10.0.
* A test case for the config is added. It is designed to fail if the
config is not deprecated (has no effect) in Valkey 9 and deleted in
Valkey 10.
* Other test cases are adjusted to work regardless of this config.
Fixes#274Fixes#61
---------
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This includes comments used for module API documentation.
* Strategy for replacement: Regex search: `(//|/\*| \*|#).* ("|\()?(r|R)edis( |\.
|'|\n|,|-|\)|")(?!nor the names of its contributors)(?!Ltd.)(?!Labs)(?!Contributors.)`
* Don't edit copyright comments
* Replace "Redis version X.X" -> "Redis OSS version X.X" to distinguish
from newly licensed repository
* Replace "Redis Object" -> "Object"
* Exclude markdown for now
* Don't edit Lua scripting comments referring to redis.X API
* Replace "Redis Protocol" -> "RESP"
* Replace redis-benchmark, -cli, -server, -check-aof/rdb with "valkey-"
prefix
* Most other places, I use best judgement to either remove "Redis", or
replace with "the server" or "server"
Fixes#148
---------
Signed-off-by: Jacob Murphy <jkmurphy@google.com>
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This commit updates the following fields:
1. server_version -> valkey_version in server info. Since we would like
to advertise specific compatibility, we are making the version specific
to valkey. servername will remain as an optional indicator, and other
valkey compatible stores might choose to advertise something else.
1. We dropped redis-ver from the API. This isn't related to API
compatibility, but we didn't want to "fake" that valkey was creating an
rdb from a Redis version.
1. Renamed server-ver -> valkey_version in rdb info. Same as point one,
we want to explicitly indicate this was created by a valkey server.
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Fix#146
Removed REDISMODULE_ prefixes from the core source code to align with
the new SERVERMODULE_ naming convention. Added a new 'redismodule.h'
header file to ensure full backward compatibility with existing modules.
This compatibility layer maps all legacy REDISMODULE_ prefixed
identifiers to their new SERVERMODULE_ equivalents, allowing existing
Redis modules to function without modification.
---------
Signed-off-by: Ping Xie <pingxie@google.com>
New info information to be used to determine the valkey versioning info.
Internally, introduce new define values for "SERVER_VERSION" which is
different from the Redis compatibility version, "REDIS_VERSION".
Add two new info fields:
`server_version`: The Valkey server version
`server_name`: Indicates that the server is valkey.
Add one new RDB field: `server_ver`, which indicates the valkey version
that produced the server.
Add 3 new LUA globals: `SERVER_VERSION_NUM`, `SERVER_VERSION`, and
`SERVER_NAME`. Which reflect the valkey version instead of the Redis
compatibility version.
Also clean up various places where Redis and configuration was being
used that is no longer necessary.
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
There is a timing issue in the test, close may arrive late, or in
freeClientAsync we will free the client in async way, which will
lead to errors in watching_clients statistics, since we will only
unwatch all keys when we truly freeClient.
Add a wait here to avoid this problem. Also fixed some outdated
comments i saw. The test was introduced in #12966.
