When test stop 'load handler' by killing the process that generating the load,
some commands that already in the input buffer, still might be processed by the server.
This may cause some instability in tests, that count on that no more commands
processed after we stop the `load handler'
In this commit, new proc 'wait_load_handlers_disconnected' added, to verify that no more
cammands from any 'load handler' prossesed, by checking that the clients who
genreate the load is disconnceted.
Also, replacing check of dbsize with wait_for_ofs_sync before comparing debug digest, as
it would fail in case the last key the workload wrote was an overridden key (not a new one).
Affected tests
Race fix:
- failover command to specific replica works
- Connect multiple replicas at the same time (issue #141), master diskless=$mdl, replica diskless=$sdl
- AOF rewrite during write load: RDB preamble=$rdbpre
Cleanup and speedup:
- Test replication with blocking lists and sorted sets operations
- Test replication with parallel clients writing in different DBs
- Test replication partial resync: $descr (diskless: $mdl, $sdl, reconnect: $reconnect
(cherry picked from commit 32a2584e079a1b3c2d1e6649e38239381a73a459)
There are two issues fixed in this commit:
1. we want to fail the EXEC command in case there is a watched key that's logically
expired but not yet deleted by active expire or lazy expire.
2. we saw that currently cache time is update in every `call()` (including nested calls),
this time is being also being use for the isKeyExpired comparison, we want to update
the cache time only in the first call (execCommand)
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit ac8b1df8850cc80fbf9ce8c2fbde0c1d3a1b4e91)
The `Tracking gets notification of expired keys` test in tracking.tcl
used to hung in valgrind CI quite a lot.
It turns out the reason is that with valgrind and a busy machine, the
server cron active expire cycle could easily run in the same event loop
as the command that created `mykey`, so that when they key got expired,
there were two change events to broadcast, one that set the key and one
that expired it, but since we used raxTryInsert, the client that was
associated with the "last" change was the one that created the key, so
the NOLOOP filtered that event.
This commit adds a test that reproduces the problem by using lazy expire
in a multi-exec which makes sure the key expires in the same event loop
as the one that added it.
(cherry picked from commit 9b564b525d8ce88295ec14ffdc3bede7e5f5c33e)
When client breached the output buffer soft limit but then went idle,
we didn't disconnect on soft limit timeout, now we do.
Note this also resolves some sporadic test failures in due to Linux
buffering data which caused tests to fail if during the test we went
back under the soft COB limit.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
(cherry picked from commit 152fce5e2cbf947a389da414a431f7331981a374)
Use an invalid IP address to trigger CONFIG SET bind failure, instead of DNS which is not guaranteed to always fail.
(cherry picked from commit 2b22fffc787e91df789dabf23ddcf19ecf34cf6f)
Adding a new type mask for key space notification, REDISMODULE_NOTIFY_MODULE, to enable unique notifications from commands on REDISMODULE_KEYTYPE_MODULE type keys (which is currently unsupported).
Modules can subscribe to a module key keyspace notification by RM_SubscribeToKeyspaceEvents,
and clients by notify-keyspace-events of redis.conf or via the CONFIG SET, with the characters 'd' or 'A'
(REDISMODULE_NOTIFY_MODULE type mask is part of the '**A**ll' notation for key space notifications).
Refactor: move some pubsub test infra from pubsub.tcl to util.tcl to be re-used by other tests.
Before this commit using RM_Call without "!" could cause the master
to lazy-expire a key (delete it) but without replicating to replicas.
This could cause the replica's memory usage to gradually grow and
could also cause consistency issues if the master and replica have
a clock diff.
This bug was introduced in #8617
Added a test which demonstrates that scenario.
In the initial release of Redis 6.2 setting a user to only allow pubsub access to
a specific channel, and doing ACL SAVE, resulted in an assertion when
ACL LOAD was used. This was later changed by #8723 (not yet released),
but still not properly resolved (now it errors instead of crash).
The problem is that the server that generates an ACL file, doesn't know what
would be the setting of the acl-pubsub-default config in the server that will load it.
so ACL SAVE needs to always start with resetchannels directive.
This should still be compatible with old acl files (from redis 6.0), and ones from earlier
versions of 6.2 that didn't mess with channels.
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The tail size of c->reply is 16kb, but in the test only publish a
few chars each time, due to a change in #8699, the obuf limit
is now checked a new memory allocation is made, so this test
would have sometimes failed to trigger a soft limit disconnection
in time.
The solution is to write bigger payloads to the output buffer, but
still limit their rate (not more than 100k/s).
Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
Background:
Redis 6.2 added ACL control for pubsub channels (#7993), which were supposed
to be permissive by default to retain compatibility with redis 6.0 ACL.
But due to a bug, only newly created users got this `acl-pubsub-default` applied,
while overwritten (updated) users got reset to `resetchannels` (denied).
Since the "default" user exists before loading the config file,
any ACL change to it, results in an update / overwrite.
So when a "default" user is loaded from config file or include ACL
file with no channels related rules, the user will not have any
permissions to any channels. But other users will have default
permissions to any channels.
When upgraded from 6.0 with config rewrite, this will lead to
"default" user channels permissions lost.
When users are loaded from include file, then call "acl load", users
will also lost channels permissions.
Similarly, the `reset` ACL rule, would have reset the user to be denied
access to any channels, ignoring `acl-pubsub-default` and breaking
compatibility with redis 6.0.
The implication of this fix is that it regains compatibility with redis 6.0,
but breaks compatibility with redis 6.2.0 and 2.0.1. e.g. after the upgrade,
the default user will regain access to pubsub channels.
Other changes:
Additionally this commit rename server.acl_pubusub_default to
server.acl_pubsub_default and fix typo in acl tests.
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
Problem:
Currently, when performing random distribution verification, we determine
the probability of each element occurring in the sum, but the probability is
only an estimate, these tests had rare sporadic failures, and we cannot verify
what the probability of failure will be.
Solution:
Using the chi-square distribution instead of the original random distribution
validation makes the test more reasonable and easier to find problems.
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
'processCommandAndResetClient' returns 1 if client is dead. It does it
by checking if serve.current_client is NULL. On script timeout, Redis will re-enter
'processCommandAndResetClient' and when finish we will set server.current_client
to NULL. This will cause later to falsely return 1 and think that the client that
sent the timed-out script is dead (Redis to stop reading from the client buffer).
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
