futriix/src/functions.c

1140 lines
38 KiB
C
Raw Permalink Normal View History

/*
* Copyright (c) 2021, Redis Ltd.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Redis nor the names of its contributors may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "functions.h"
#include "sds.h"
#include "dict.h"
#include "adlist.h"
#include "atomicvar.h"
#define LOAD_TIMEOUT_MS 500
typedef enum {
restorePolicy_Flush, restorePolicy_Append, restorePolicy_Replace
} restorePolicy;
static size_t engine_cache_memory = 0;
/* Forward declaration */
static void engineFunctionDispose(dict *d, void *obj);
static void engineStatsDispose(dict *d, void *obj);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
static void engineLibraryDispose(dict *d, void *obj);
static int functionsVerifyName(sds name);
typedef struct functionsLibEngineStats {
size_t n_lib;
size_t n_functions;
} functionsLibEngineStats;
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
struct functionsLibCtx {
dict *libraries; /* Library name -> Library object */
dict *functions; /* Function name -> Function object that can be used to run the function */
size_t cache_memory; /* Overhead memory (structs, dictionaries, ..) used by all the functions */
dict *engines_stats; /* Per engine statistics */
};
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
typedef struct functionsLibMataData {
sds engine;
sds name;
sds code;
} functionsLibMataData;
dictType engineDictType = {
dictSdsCaseHash, /* hash function */
dictSdsDup, /* key dup */
NULL, /* val dup */
dictSdsKeyCaseCompare, /* key compare */
dictSdsDestructor, /* key destructor */
NULL, /* val destructor */
NULL /* allow to expand */
};
dictType functionDictType = {
dictSdsCaseHash, /* hash function */
dictSdsDup, /* key dup */
NULL, /* val dup */
dictSdsKeyCaseCompare,/* key compare */
dictSdsDestructor, /* key destructor */
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
NULL, /* val destructor */
NULL /* allow to expand */
};
dictType engineStatsDictType = {
dictSdsCaseHash, /* hash function */
dictSdsDup, /* key dup */
NULL, /* val dup */
dictSdsKeyCaseCompare,/* key compare */
dictSdsDestructor, /* key destructor */
engineStatsDispose, /* val destructor */
NULL /* allow to expand */
};
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictType libraryFunctionDictType = {
dictSdsHash, /* hash function */
dictSdsDup, /* key dup */
NULL, /* val dup */
dictSdsKeyCompare, /* key compare */
dictSdsDestructor, /* key destructor */
engineFunctionDispose,/* val destructor */
NULL /* allow to expand */
};
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictType librariesDictType = {
dictSdsHash, /* hash function */
dictSdsDup, /* key dup */
NULL, /* val dup */
dictSdsKeyCompare, /* key compare */
dictSdsDestructor, /* key destructor */
engineLibraryDispose, /* val destructor */
NULL /* allow to expand */
};
/* Dictionary of engines */
static dict *engines = NULL;
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
/* Libraries Ctx.
* Contains the dictionary that map a library name to library object,
* Contains the dictionary that map a function name to function object,
* and the cache memory used by all the functions */
static functionsLibCtx *curr_functions_lib_ctx = NULL;
static size_t functionMallocSize(functionInfo *fi) {
return zmalloc_size(fi) + sdsZmallocSize(fi->name)
+ (fi->desc ? sdsZmallocSize(fi->desc) : 0)
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
+ fi->li->ei->engine->get_function_memory_overhead(fi->function);
}
static size_t libraryMallocSize(functionLibInfo *li) {
return zmalloc_size(li) + sdsZmallocSize(li->name)
+ sdsZmallocSize(li->code);
}
static void engineStatsDispose(dict *d, void *obj) {
UNUSED(d);
functionsLibEngineStats *stats = obj;
zfree(stats);
}
/* Dispose function memory */
static void engineFunctionDispose(dict *d, void *obj) {
UNUSED(d);
if (!obj) {
return;
}
functionInfo *fi = obj;
sdsfree(fi->name);
if (fi->desc) {
sdsfree(fi->desc);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
engine *engine = fi->li->ei->engine;
engine->free_function(engine->engine_ctx, fi->function);
zfree(fi);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
static void engineLibraryFree(functionLibInfo* li) {
if (!li) {
return;
}
dictRelease(li->functions);
sdsfree(li->name);
sdsfree(li->code);
zfree(li);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
static void engineLibraryDispose(dict *d, void *obj) {
UNUSED(d);
engineLibraryFree(obj);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
/* Clear all the functions from the given library ctx */
void functionsLibCtxClear(functionsLibCtx *lib_ctx) {
dictEmpty(lib_ctx->functions, NULL);
dictEmpty(lib_ctx->libraries, NULL);
dictIterator *iter = dictGetIterator(lib_ctx->engines_stats);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
functionsLibEngineStats *stats = dictGetVal(entry);
stats->n_functions = 0;
stats->n_lib = 0;
}
dictReleaseIterator(iter);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
curr_functions_lib_ctx->cache_memory = 0;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
void functionsLibCtxClearCurrent(int async) {
Change FUNCTION CREATE, DELETE and FLUSH to be WRITE commands instead of MAY_REPLICATE. (#9953) The issue with MAY_REPLICATE is that all automatic mechanisms to handle write commands will not work. This require have a special treatment for: * Not allow those commands to be executed on RO replica. * Allow those commands to be executed on RO replica from primary connection. * Allow those commands to be executed on the RO replica from AOF. By setting those commands as WRITE commands we are getting all those properties from Redis. Test was added to verify that those properties work as expected. In addition, rearrange when and where functions are flushed. Before this PR functions were flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the assumptions that functions are data and need to be created/deleted alongside with the data. A side effect of this, for example, `debug reload noflush` did not flush the data but did flush the functions, `debug loadaof` flush the data but not the functions. This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not want to flush the functions (on all other cases, functions will be flushed). Used the new flag on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof` to verify that functions behave the same as the data. Notice that because now functions will be deleted along side with the data we can not allow `CLUSTER RESET` to be called from within a function (it will cause the function to be released while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET` so it will not be possible to be called from within a function. The other cluster commands are allowed from within a function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script. Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions. When loading functions, if this flag is set, we will replace old functions with new ones on collisions.
2021-12-21 16:13:29 +02:00
if (async) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtx *old_l_ctx = curr_functions_lib_ctx;
curr_functions_lib_ctx = functionsLibCtxCreate();
freeFunctionsAsync(old_l_ctx);
Change FUNCTION CREATE, DELETE and FLUSH to be WRITE commands instead of MAY_REPLICATE. (#9953) The issue with MAY_REPLICATE is that all automatic mechanisms to handle write commands will not work. This require have a special treatment for: * Not allow those commands to be executed on RO replica. * Allow those commands to be executed on RO replica from primary connection. * Allow those commands to be executed on the RO replica from AOF. By setting those commands as WRITE commands we are getting all those properties from Redis. Test was added to verify that those properties work as expected. In addition, rearrange when and where functions are flushed. Before this PR functions were flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the assumptions that functions are data and need to be created/deleted alongside with the data. A side effect of this, for example, `debug reload noflush` did not flush the data but did flush the functions, `debug loadaof` flush the data but not the functions. This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not want to flush the functions (on all other cases, functions will be flushed). Used the new flag on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof` to verify that functions behave the same as the data. Notice that because now functions will be deleted along side with the data we can not allow `CLUSTER RESET` to be called from within a function (it will cause the function to be released while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET` so it will not be possible to be called from within a function. The other cluster commands are allowed from within a function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script. Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions. When loading functions, if this flag is set, we will replace old functions with new ones on collisions.
2021-12-21 16:13:29 +02:00
} else {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtxClear(curr_functions_lib_ctx);
Change FUNCTION CREATE, DELETE and FLUSH to be WRITE commands instead of MAY_REPLICATE. (#9953) The issue with MAY_REPLICATE is that all automatic mechanisms to handle write commands will not work. This require have a special treatment for: * Not allow those commands to be executed on RO replica. * Allow those commands to be executed on RO replica from primary connection. * Allow those commands to be executed on the RO replica from AOF. By setting those commands as WRITE commands we are getting all those properties from Redis. Test was added to verify that those properties work as expected. In addition, rearrange when and where functions are flushed. Before this PR functions were flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the assumptions that functions are data and need to be created/deleted alongside with the data. A side effect of this, for example, `debug reload noflush` did not flush the data but did flush the functions, `debug loadaof` flush the data but not the functions. This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not want to flush the functions (on all other cases, functions will be flushed). Used the new flag on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof` to verify that functions behave the same as the data. Notice that because now functions will be deleted along side with the data we can not allow `CLUSTER RESET` to be called from within a function (it will cause the function to be released while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET` so it will not be possible to be called from within a function. The other cluster commands are allowed from within a function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script. Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions. When loading functions, if this flag is set, we will replace old functions with new ones on collisions.
2021-12-21 16:13:29 +02:00
}
}
/* Free the given functions ctx */
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
void functionsLibCtxFree(functionsLibCtx *functions_lib_ctx) {
functionsLibCtxClear(functions_lib_ctx);
dictRelease(functions_lib_ctx->functions);
dictRelease(functions_lib_ctx->libraries);
dictRelease(functions_lib_ctx->engines_stats);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
zfree(functions_lib_ctx);
}
/* Swap the current functions ctx with the given one.
* Free the old functions ctx. */
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
void functionsLibCtxSwapWithCurrent(functionsLibCtx *new_lib_ctx) {
functionsLibCtxFree(curr_functions_lib_ctx);
curr_functions_lib_ctx = new_lib_ctx;
}
/* return the current functions ctx */
functionsLibCtx* functionsLibCtxGetCurrent(void) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return curr_functions_lib_ctx;
}
/* Create a new functions ctx */
functionsLibCtx* functionsLibCtxCreate(void) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtx *ret = zmalloc(sizeof(functionsLibCtx));
ret->libraries = dictCreate(&librariesDictType);
ret->functions = dictCreate(&functionDictType);
ret->engines_stats = dictCreate(&engineStatsDictType);
dictIterator *iter = dictGetIterator(engines);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
engineInfo *ei = dictGetVal(entry);
functionsLibEngineStats *stats = zcalloc(sizeof(*stats));
dictAdd(ret->engines_stats, ei->name, stats);
}
dictReleaseIterator(iter);
ret->cache_memory = 0;
return ret;
}
/*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* Creating a function inside the given library.
* On success, return C_OK.
* On error, return C_ERR and set err output parameter with a relevant error message.
*
* Note: the code assumes 'name' is NULL terminated but not require it to be binary safe.
* the function will verify that the given name is following the naming format
* and return an error if its not.
*/
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
int functionLibCreateFunction(sds name, void *function, functionLibInfo *li, sds desc, uint64_t f_flags, sds *err) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (functionsVerifyName(name) != C_OK) {
*err = sdsnew("Library names can only contain letters, numbers, or underscores(_) and must be at least one character long");
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return C_ERR;
}
if (dictFetchValue(li->functions, name)) {
*err = sdsnew("Function already exists in the library");
return C_ERR;
}
functionInfo *fi = zmalloc(sizeof(*fi));
*fi = (functionInfo) {
.name = name,
.function = function,
.li = li,
.desc = desc,
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
.f_flags = f_flags,
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
};
int res = dictAdd(li->functions, fi->name, fi);
serverAssert(res == DICT_OK);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return C_OK;
}
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
static functionLibInfo* engineLibraryCreate(sds name, engineInfo *ei, sds code) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionLibInfo *li = zmalloc(sizeof(*li));
*li = (functionLibInfo) {
.name = sdsdup(name),
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
.functions = dictCreate(&libraryFunctionDictType),
.ei = ei,
.code = sdsdup(code),
};
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return li;
}
static void libraryUnlink(functionsLibCtx *lib_ctx, functionLibInfo* li) {
dictIterator *iter = dictGetIterator(li->functions);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
functionInfo *fi = dictGetVal(entry);
int ret = dictDelete(lib_ctx->functions, fi->name);
serverAssert(ret == DICT_OK);
lib_ctx->cache_memory -= functionMallocSize(fi);
}
dictReleaseIterator(iter);
entry = dictUnlink(lib_ctx->libraries, li->name);
dictSetVal(lib_ctx->libraries, entry, NULL);
dictFreeUnlinkedEntry(lib_ctx->libraries, entry);
lib_ctx->cache_memory -= libraryMallocSize(li);
/* update stats */
functionsLibEngineStats *stats = dictFetchValue(lib_ctx->engines_stats, li->ei->name);
serverAssert(stats);
stats->n_lib--;
stats->n_functions -= dictSize(li->functions);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
}
static void libraryLink(functionsLibCtx *lib_ctx, functionLibInfo* li) {
dictIterator *iter = dictGetIterator(li->functions);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
functionInfo *fi = dictGetVal(entry);
dictAdd(lib_ctx->functions, fi->name, fi);
lib_ctx->cache_memory += functionMallocSize(fi);
}
dictReleaseIterator(iter);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictAdd(lib_ctx->libraries, li->name, li);
lib_ctx->cache_memory += libraryMallocSize(li);
/* update stats */
functionsLibEngineStats *stats = dictFetchValue(lib_ctx->engines_stats, li->ei->name);
serverAssert(stats);
stats->n_lib++;
stats->n_functions += dictSize(li->functions);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
/* Takes all libraries from lib_ctx_src and add to lib_ctx_dst.
* On collision, if 'replace' argument is true, replace the existing library with the new one.
* Otherwise abort and leave 'lib_ctx_dst' and 'lib_ctx_src' untouched.
* Return C_OK on success and C_ERR if aborted. If C_ERR is returned, set a relevant
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* error message on the 'err' out parameter.
* */
static int libraryJoin(functionsLibCtx *functions_lib_ctx_dst, functionsLibCtx *functions_lib_ctx_src, int replace, sds *err) {
int ret = C_ERR;
dictIterator *iter = NULL;
/* Stores the libraries we need to replace in case a revert is required.
* Only initialized when needed */
list *old_libraries_list = NULL;
dictEntry *entry = NULL;
iter = dictGetIterator(functions_lib_ctx_src->libraries);
while ((entry = dictNext(iter))) {
functionLibInfo *li = dictGetVal(entry);
functionLibInfo *old_li = dictFetchValue(functions_lib_ctx_dst->libraries, li->name);
if (old_li) {
if (!replace) {
/* library already exists, failed the restore. */
*err = sdscatfmt(sdsempty(), "Library %s already exists", li->name);
goto done;
} else {
if (!old_libraries_list) {
old_libraries_list = listCreate();
listSetFreeMethod(old_libraries_list, (void (*)(void*))engineLibraryFree);
}
libraryUnlink(functions_lib_ctx_dst, old_li);
listAddNodeTail(old_libraries_list, old_li);
}
}
}
dictReleaseIterator(iter);
iter = NULL;
/* Make sure no functions collision */
iter = dictGetIterator(functions_lib_ctx_src->functions);
while ((entry = dictNext(iter))) {
functionInfo *fi = dictGetVal(entry);
if (dictFetchValue(functions_lib_ctx_dst->functions, fi->name)) {
*err = sdscatfmt(sdsempty(), "Function %s already exists", fi->name);
goto done;
}
}
dictReleaseIterator(iter);
iter = NULL;
/* No collision, it is safe to link all the new libraries. */
iter = dictGetIterator(functions_lib_ctx_src->libraries);
while ((entry = dictNext(iter))) {
functionLibInfo *li = dictGetVal(entry);
libraryLink(functions_lib_ctx_dst, li);
dictSetVal(functions_lib_ctx_src->libraries, entry, NULL);
}
dictReleaseIterator(iter);
iter = NULL;
functionsLibCtxClear(functions_lib_ctx_src);
if (old_libraries_list) {
listRelease(old_libraries_list);
old_libraries_list = NULL;
}
ret = C_OK;
done:
if (iter) dictReleaseIterator(iter);
if (old_libraries_list) {
/* Link back all libraries on tmp_l_ctx */
while (listLength(old_libraries_list) > 0) {
listNode *head = listFirst(old_libraries_list);
functionLibInfo *li = listNodeValue(head);
listNodeValue(head) = NULL;
libraryLink(functions_lib_ctx_dst, li);
listDelNode(old_libraries_list, head);
}
listRelease(old_libraries_list);
}
return ret;
}
/* Register an engine, should be called once by the engine on startup and give the following:
*
* - engine_name - name of the engine to register
* - engine_ctx - the engine ctx that should be used by Redis to interact with the engine */
int functionsRegisterEngine(const char *engine_name, engine *engine) {
sds engine_name_sds = sdsnew(engine_name);
if (dictFetchValue(engines, engine_name_sds)) {
serverLog(LL_WARNING, "Same engine was registered twice");
sdsfree(engine_name_sds);
return C_ERR;
}
client *c = createClient(NULL);
c->flags |= (CLIENT_DENY_BLOCKING | CLIENT_SCRIPT);
engineInfo *ei = zmalloc(sizeof(*ei));
*ei = (engineInfo ) { .name = engine_name_sds, .engine = engine, .c = c,};
dictAdd(engines, engine_name_sds, ei);
engine_cache_memory += zmalloc_size(ei) + sdsZmallocSize(ei->name) +
zmalloc_size(engine) +
engine->get_engine_memory_overhead(engine->engine_ctx);
return C_OK;
}
/*
* FUNCTION STATS
*/
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void functionStatsCommand(client *c) {
if (scriptIsRunning() && scriptIsEval()) {
addReplyErrorObject(c, shared.slowevalerr);
return;
}
addReplyMapLen(c, 2);
addReplyBulkCString(c, "running_script");
if (!scriptIsRunning()) {
addReplyNull(c);
} else {
addReplyMapLen(c, 3);
addReplyBulkCString(c, "name");
addReplyBulkCString(c, scriptCurrFunction());
addReplyBulkCString(c, "command");
client *script_client = scriptGetCaller();
addReplyArrayLen(c, script_client->argc);
for (int i = 0 ; i < script_client->argc ; ++i) {
addReplyBulkCBuffer(c, script_client->argv[i]->ptr, sdslen(script_client->argv[i]->ptr));
}
addReplyBulkCString(c, "duration_ms");
addReplyLongLong(c, scriptRunDuration());
}
addReplyBulkCString(c, "engines");
addReplyMapLen(c, dictSize(engines));
dictIterator *iter = dictGetIterator(engines);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
engineInfo *ei = dictGetVal(entry);
addReplyBulkCString(c, ei->name);
addReplyMapLen(c, 2);
functionsLibEngineStats *e_stats = dictFetchValue(curr_functions_lib_ctx->engines_stats, ei->name);
addReplyBulkCString(c, "libraries_count");
addReplyLongLong(c, e_stats->n_lib);
addReplyBulkCString(c, "functions_count");
addReplyLongLong(c, e_stats->n_functions);
}
dictReleaseIterator(iter);
}
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
static void functionListReplyFlags(client *c, functionInfo *fi) {
/* First count the number of flags we have */
int flagcount = 0;
for (scriptFlag *flag = scripts_flags_def; flag->str ; ++flag) {
if (fi->f_flags & flag->flag) {
++flagcount;
}
}
addReplySetLen(c, flagcount);
for (scriptFlag *flag = scripts_flags_def; flag->str ; ++flag) {
if (fi->f_flags & flag->flag) {
addReplyStatus(c, flag->str);
}
}
}
/*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* FUNCTION LIST [LIBRARYNAME PATTERN] [WITHCODE]
*
* Return general information about all the libraries:
* * Library name
* * The engine used to run the Library
* * Library description
* * Functions list
* * Library code (if WITHCODE is given)
*
* It is also possible to given library name pattern using
* LIBRARYNAME argument, if given, return only libraries
* that matches the given pattern.
*/
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void functionListCommand(client *c) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
int with_code = 0;
sds library_name = NULL;
for (int i = 2 ; i < c->argc ; ++i) {
robj *next_arg = c->argv[i];
if (!with_code && !strcasecmp(next_arg->ptr, "withcode")) {
with_code = 1;
continue;
}
if (!library_name && !strcasecmp(next_arg->ptr, "libraryname")) {
if (i >= c->argc - 1) {
addReplyError(c, "library name argument was not given");
return;
}
library_name = c->argv[++i]->ptr;
continue;
}
addReplyErrorSds(c, sdscatfmt(sdsempty(), "Unknown argument %s", next_arg->ptr));
return;
}
size_t reply_len = 0;
void *len_ptr = NULL;
if (library_name) {
len_ptr = addReplyDeferredLen(c);
} else {
/* If no pattern is asked we know the reply len and we can just set it */
addReplyArrayLen(c, dictSize(curr_functions_lib_ctx->libraries));
}
dictIterator *iter = dictGetIterator(curr_functions_lib_ctx->libraries);
dictEntry *entry = NULL;
while ((entry = dictNext(iter))) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionLibInfo *li = dictGetVal(entry);
if (library_name) {
if (!stringmatchlen(library_name, sdslen(library_name), li->name, sdslen(li->name), 1)) {
continue;
}
}
++reply_len;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
addReplyMapLen(c, with_code? 4 : 3);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
addReplyBulkCString(c, "library_name");
addReplyBulkCBuffer(c, li->name, sdslen(li->name));
addReplyBulkCString(c, "engine");
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
addReplyBulkCBuffer(c, li->ei->name, sdslen(li->ei->name));
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
addReplyBulkCString(c, "functions");
addReplyArrayLen(c, dictSize(li->functions));
dictIterator *functions_iter = dictGetIterator(li->functions);
dictEntry *function_entry = NULL;
while ((function_entry = dictNext(functions_iter))) {
functionInfo *fi = dictGetVal(function_entry);
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
addReplyMapLen(c, 3);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
addReplyBulkCString(c, "name");
addReplyBulkCBuffer(c, fi->name, sdslen(fi->name));
addReplyBulkCString(c, "description");
if (fi->desc) {
addReplyBulkCBuffer(c, fi->desc, sdslen(fi->desc));
} else {
addReplyNull(c);
}
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
addReplyBulkCString(c, "flags");
functionListReplyFlags(c, fi);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictReleaseIterator(functions_iter);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (with_code) {
addReplyBulkCString(c, "library_code");
addReplyBulkCBuffer(c, li->code, sdslen(li->code));
}
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictReleaseIterator(iter);
if (len_ptr) {
setDeferredArrayLen(c, len_ptr, reply_len);
}
}
/*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* FUNCTION DELETE <LIBRARY NAME>
*/
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void functionDeleteCommand(client *c) {
robj *function_name = c->argv[2];
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionLibInfo *li = dictFetchValue(curr_functions_lib_ctx->libraries, function_name->ptr);
if (!li) {
addReplyError(c, "Library not found");
return;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
libraryUnlink(curr_functions_lib_ctx, li);
engineLibraryFree(li);
/* Indicate that the command changed the data so it will be replicated and
* counted as a data change (for persistence configuration) */
server.dirty++;
addReply(c, shared.ok);
}
/* FUNCTION KILL */
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void functionKillCommand(client *c) {
scriptKill(c, 0);
}
Expose script flags to processCommand for better handling (#10744) The important part is that read-only scripts (not just EVAL_RO and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike before where only the _RO commands would be processed). Other than that, some errors like OOM, READONLY, MASTERDOWN are now handled by processCommand, rather than the command itself affects the error string (and even error code in some cases), and command stats. Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will be considered `write` commands in scripts and will be blocked in all read-only scripts just like other write commands. They'll also be blocked in EVAL_RO (i.e. even for scripts without the `no-writes` shebang flag. This commit also hides the `may_replicate` flag from the COMMAND command output. this is a **breaking change**. background about may_replicate: We don't want to expose a no-may-replicate flag or alike to scripts, since we consider the may-replicate thing an internal concern of redis, that we may some day get rid of. In fact, the may-replicate flag was initially introduced to flag EVAL: since we didn't know what it's gonna do ahead of execution, before function-flags existed). PUBLISH and PFCOUNT, both of which because they have side effects which may some day be fixed differently. code changes: The changes in eval.c are mostly code re-ordering: - evalCalcFunctionName is extracted out of evalGenericCommand - evalExtractShebangFlags is extracted luaCreateFunction - evalGetCommandFlags is new code
2022-06-01 14:09:40 +03:00
/* Try to extract command flags if we can, returns the modified flags.
* Note that it does not guarantee the command arguments are right. */
uint64_t fcallGetCommandFlags(client *c, uint64_t cmd_flags) {
robj *function_name = c->argv[1];
c->cur_script = dictFind(curr_functions_lib_ctx->functions, function_name->ptr);
if (!c->cur_script)
Expose script flags to processCommand for better handling (#10744) The important part is that read-only scripts (not just EVAL_RO and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike before where only the _RO commands would be processed). Other than that, some errors like OOM, READONLY, MASTERDOWN are now handled by processCommand, rather than the command itself affects the error string (and even error code in some cases), and command stats. Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will be considered `write` commands in scripts and will be blocked in all read-only scripts just like other write commands. They'll also be blocked in EVAL_RO (i.e. even for scripts without the `no-writes` shebang flag. This commit also hides the `may_replicate` flag from the COMMAND command output. this is a **breaking change**. background about may_replicate: We don't want to expose a no-may-replicate flag or alike to scripts, since we consider the may-replicate thing an internal concern of redis, that we may some day get rid of. In fact, the may-replicate flag was initially introduced to flag EVAL: since we didn't know what it's gonna do ahead of execution, before function-flags existed). PUBLISH and PFCOUNT, both of which because they have side effects which may some day be fixed differently. code changes: The changes in eval.c are mostly code re-ordering: - evalCalcFunctionName is extracted out of evalGenericCommand - evalExtractShebangFlags is extracted luaCreateFunction - evalGetCommandFlags is new code
2022-06-01 14:09:40 +03:00
return cmd_flags;
functionInfo *fi = dictGetVal(c->cur_script);
Expose script flags to processCommand for better handling (#10744) The important part is that read-only scripts (not just EVAL_RO and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike before where only the _RO commands would be processed). Other than that, some errors like OOM, READONLY, MASTERDOWN are now handled by processCommand, rather than the command itself affects the error string (and even error code in some cases), and command stats. Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will be considered `write` commands in scripts and will be blocked in all read-only scripts just like other write commands. They'll also be blocked in EVAL_RO (i.e. even for scripts without the `no-writes` shebang flag. This commit also hides the `may_replicate` flag from the COMMAND command output. this is a **breaking change**. background about may_replicate: We don't want to expose a no-may-replicate flag or alike to scripts, since we consider the may-replicate thing an internal concern of redis, that we may some day get rid of. In fact, the may-replicate flag was initially introduced to flag EVAL: since we didn't know what it's gonna do ahead of execution, before function-flags existed). PUBLISH and PFCOUNT, both of which because they have side effects which may some day be fixed differently. code changes: The changes in eval.c are mostly code re-ordering: - evalCalcFunctionName is extracted out of evalGenericCommand - evalExtractShebangFlags is extracted luaCreateFunction - evalGetCommandFlags is new code
2022-06-01 14:09:40 +03:00
uint64_t script_flags = fi->f_flags;
return scriptFlagsToCmdFlags(cmd_flags, script_flags);
}
static void fcallCommandGeneric(client *c, int ro) {
/* Functions need to be fed to monitors before the commands they execute. */
replicationFeedMonitors(c,server.monitors,c->db->id,c->argv,c->argc);
robj *function_name = c->argv[1];
dictEntry *de = c->cur_script;
if (!de)
de = dictFind(curr_functions_lib_ctx->functions, function_name->ptr);
if (!de) {
addReplyError(c, "Function not found");
return;
}
functionInfo *fi = dictGetVal(de);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
engine *engine = fi->li->ei->engine;
long long numkeys;
/* Get the number of arguments that are keys */
if (getLongLongFromObject(c->argv[2], &numkeys) != C_OK) {
addReplyError(c, "Bad number of keys provided");
return;
}
if (numkeys > (c->argc - 3)) {
addReplyError(c, "Number of keys can't be greater than number of args");
return;
} else if (numkeys < 0) {
addReplyError(c, "Number of keys can't be negative");
return;
}
Support function flags in script EVAL via shebang header (#10126) In #10025 we added a mechanism for flagging certain properties for Redis Functions. This lead us to think we'd like to "port" this mechanism to Redis Scripts (`EVAL`) as well. One good reason for this, other than the added functionality is because it addresses the poor behavior we currently have in `EVAL` in case the script performs a (non DENY_OOM) write operation during OOM state. See #8478 (And a previous attempt to handle it via #10093) for details. Note that in Redis Functions **all** write operations (including DEL) will return an error during OOM state unless the function is flagged as `allow-oom` in which case no OOM checking is performed at all. This PR: - Enables setting `EVAL` (and `SCRIPT LOAD`) script flags as defined in #10025. - Provides a syntactical framework via [shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) for additional script annotations and even engine selection (instead of just lua) for scripts. - Provides backwards compatibility so scripts without the new annotations will behave as they did before. - Appropriate tests. - Changes `EVAL[SHA]/_RO` to be flagged as `STALE` commands. This makes it possible to flag individual scripts as `allow-stale` or not flag them as such. In backwards compatibility mode these commands will return the `MASTERDOWN` error as before. - Changes `SCRIPT LOAD` to be flagged as a `STALE` command. This is mainly to make it logically compatible with the change to `EVAL` in the previous point. It enables loading a script on a stale server which is technically okay it doesn't relate directly to the server's dataset. Running the script does, but that won't work unless the script is explicitly marked as `allow-stale`. Note that even though the LUA syntax doesn't support hash tag comments `.lua` files do support a shebang tag on the top so they can be executed on Unix systems like any shell script. LUA's `luaL_loadfile` handles this as part of the LUA library. In the case of `luaL_loadbuffer`, which is what Redis uses, I needed to fix the input script in case of a shebang manually. I did this the same way `luaL_loadfile` does, by replacing the first line with a single line feed character.
2022-01-24 16:50:02 +02:00
scriptRunCtx run_ctx;
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
Support function flags in script EVAL via shebang header (#10126) In #10025 we added a mechanism for flagging certain properties for Redis Functions. This lead us to think we'd like to "port" this mechanism to Redis Scripts (`EVAL`) as well. One good reason for this, other than the added functionality is because it addresses the poor behavior we currently have in `EVAL` in case the script performs a (non DENY_OOM) write operation during OOM state. See #8478 (And a previous attempt to handle it via #10093) for details. Note that in Redis Functions **all** write operations (including DEL) will return an error during OOM state unless the function is flagged as `allow-oom` in which case no OOM checking is performed at all. This PR: - Enables setting `EVAL` (and `SCRIPT LOAD`) script flags as defined in #10025. - Provides a syntactical framework via [shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) for additional script annotations and even engine selection (instead of just lua) for scripts. - Provides backwards compatibility so scripts without the new annotations will behave as they did before. - Appropriate tests. - Changes `EVAL[SHA]/_RO` to be flagged as `STALE` commands. This makes it possible to flag individual scripts as `allow-stale` or not flag them as such. In backwards compatibility mode these commands will return the `MASTERDOWN` error as before. - Changes `SCRIPT LOAD` to be flagged as a `STALE` command. This is mainly to make it logically compatible with the change to `EVAL` in the previous point. It enables loading a script on a stale server which is technically okay it doesn't relate directly to the server's dataset. Running the script does, but that won't work unless the script is explicitly marked as `allow-stale`. Note that even though the LUA syntax doesn't support hash tag comments `.lua` files do support a shebang tag on the top so they can be executed on Unix systems like any shell script. LUA's `luaL_loadfile` handles this as part of the LUA library. In the case of `luaL_loadbuffer`, which is what Redis uses, I needed to fix the input script in case of a shebang manually. I did this the same way `luaL_loadfile` does, by replacing the first line with a single line feed character.
2022-01-24 16:50:02 +02:00
if (scriptPrepareForRun(&run_ctx, fi->li->ei->c, c, fi->name, fi->f_flags, ro) != C_OK)
Function Flags support (no-writes, no-cluster, allow-state, allow-oom) (#10066) # Redis Functions Flags Following the discussion on #10025 Added Functions Flags support. The PR is divided to 2 sections: * Add named argument support to `redis.register_function` API. * Add support for function flags ## `redis.register_function` named argument support The first part of the PR adds support for named argument on `redis.register_function`, example: ``` redis.register_function{ function_name='f1', callback=function() return 'hello' end, description='some desc' } ``` The positional arguments is also kept, which means that it still possible to write: ``` redis.register_function('f1', function() return 'hello' end) ``` But notice that it is no longer possible to pass the optional description argument on the positional argument version. Positional argument was change to allow passing only the mandatory arguments (function name and callback). To pass more arguments the user must use the named argument version. As with positional arguments, the `function_name` and `callback` is mandatory and an error will be raise if those are missing. Also, an error will be raise if an unknown argument name is given or the arguments type is wrong. Tests was added to verify the new syntax. ## Functions Flags The second part of the PR is adding functions flags support. Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are: * `no-writes` - indicating the function perform no writes which means that it is OK to run it on: * read-only replica * Using FCALL_RO * If disk error detected It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag * `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes` and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its meaning and understand what they are doing, and Redis trust them to not increase the memory usage. (e.g. it could be an INCR or a modification on an existing key, or a DEL command) * `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make sure the function is only perform `stale` commands and raise an error if not. * `no-cluster` - indicate to disallow running the function if cluster is enabled. Default behaviure of functions (if no flags is given): 1. Allow functions to read and write 2. Do not run functions on OOM 3. Do not run functions on stale replica 4. Allow functions on cluster ### Lua API for functions flags On Lua engine, it is possible to give functions flags as `flags` named argument: ``` redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'} ``` The function flags argument must be a Lua table that contains all the requested flags, The following will result in an error: * Unknown flag * Wrong flag type Default behaviour is the same as if no flags are used. Tests were added to verify all flags functionality ## Additional changes * mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was registered with the `allow-stale` flag. * Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while stale we do not allow it to bypass the `CMD_STALE` flag of commands. * Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function: ``` > FUNCTION list withcode 1) 1) "library_name" 2) "test" 3) "engine" 4) "LUA" 5) "description" 6) (nil) 7) "functions" 8) 1) 1) "name" 2) "f1" 3) "description" 4) (nil) 5) "flags" 6) (empty array) 9) "library_code" 10) "redis.register_function{function_name='f1', callback=function() return 1 end}" ``` * Added API to get Redis version from within a script, The redis version can be provided using: 1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH 2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp` (`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less another version. The string version can be used to return to the user or print as logs. This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
2022-01-14 14:02:02 +02:00
return;
engine->call(&run_ctx, engine->engine_ctx, fi->function, c->argv + 3, numkeys,
c->argv + 3 + numkeys, c->argc - 3 - numkeys);
scriptResetRun(&run_ctx);
}
/*
* FCALL <FUNCTION NAME> nkeys <key1 .. keyn> <arg1 .. argn>
*/
void fcallCommand(client *c) {
fcallCommandGeneric(c, 0);
}
/*
* FCALL_RO <FUNCTION NAME> nkeys <key1 .. keyn> <arg1 .. argn>
*/
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void fcallroCommand(client *c) {
fcallCommandGeneric(c, 1);
}
/*
* FUNCTION DUMP
*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* Returns a binary payload representing all the libraries.
* Can be loaded using FUNCTION RESTORE
*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* The payload structure is the same as on RDB. Each library
* is saved separately with the following information:
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* * Library name
* * Engine name
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* * Library description
* * Library code
* RDB_OPCODE_FUNCTION2 is saved before each library to present
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* that the payload is a library.
* RDB version and crc64 is saved at the end of the payload.
* The RDB version is saved for backward compatibility.
* crc64 is saved so we can verify the payload content.
*/
void functionDumpCommand(client *c) {
unsigned char buf[2];
uint64_t crc;
rio payload;
rioInitWithBuffer(&payload, sdsempty());
rdbSaveFunctions(&payload);
/* RDB version */
buf[0] = RDB_VERSION & 0xff;
buf[1] = (RDB_VERSION >> 8) & 0xff;
payload.io.buffer.ptr = sdscatlen(payload.io.buffer.ptr, buf, 2);
/* CRC64 */
crc = crc64(0, (unsigned char*) payload.io.buffer.ptr,
sdslen(payload.io.buffer.ptr));
memrev64ifbe(&crc);
payload.io.buffer.ptr = sdscatlen(payload.io.buffer.ptr, &crc, 8);
addReplyBulkSds(c, payload.io.buffer.ptr);
}
/*
* FUNCTION RESTORE <payload> [FLUSH|APPEND|REPLACE]
*
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* Restore the libraries represented by the give payload.
* Restore policy to can be given to control how to handle existing libraries (default APPEND):
* * FLUSH: delete all existing libraries.
* * APPEND: appends the restored libraries to the existing libraries. On collision, abort.
* * REPLACE: appends the restored libraries to the existing libraries.
* On collision, replace the old libraries with the new libraries.
*/
void functionRestoreCommand(client *c) {
if (c->argc > 4) {
addReplySubcommandSyntaxError(c);
return;
}
restorePolicy restore_replicy = restorePolicy_Append; /* default policy: APPEND */
sds data = c->argv[2]->ptr;
size_t data_len = sdslen(data);
rio payload;
sds err = NULL;
if (c->argc == 4) {
const char *restore_policy_str = c->argv[3]->ptr;
if (!strcasecmp(restore_policy_str, "append")) {
restore_replicy = restorePolicy_Append;
} else if (!strcasecmp(restore_policy_str, "replace")) {
restore_replicy = restorePolicy_Replace;
} else if (!strcasecmp(restore_policy_str, "flush")) {
restore_replicy = restorePolicy_Flush;
} else {
addReplyError(c, "Wrong restore policy given, value should be either FLUSH, APPEND or REPLACE.");
return;
}
}
uint16_t rdbver;
if (verifyDumpPayload((unsigned char*)data, data_len, &rdbver) != C_OK) {
addReplyError(c, "DUMP payload version or checksum are wrong");
return;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtx *functions_lib_ctx = functionsLibCtxCreate();
rioInitWithBuffer(&payload, data);
/* Read until reaching last 10 bytes that should contain RDB version and checksum. */
while (data_len - payload.io.buffer.pos > 10) {
int type;
if ((type = rdbLoadType(&payload)) == -1) {
err = sdsnew("can not read data type");
goto load_error;
}
if (type == RDB_OPCODE_FUNCTION_PRE_GA) {
err = sdsnew("Pre-GA function format not supported");
goto load_error;
}
if (type != RDB_OPCODE_FUNCTION2) {
err = sdsnew("given type is not a function");
goto load_error;
}
if (rdbFunctionLoad(&payload, rdbver, functions_lib_ctx, RDBFLAGS_NONE, &err) != C_OK) {
if (!err) {
err = sdsnew("failed loading the given functions payload");
}
goto load_error;
}
}
if (restore_replicy == restorePolicy_Flush) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtxSwapWithCurrent(functions_lib_ctx);
functions_lib_ctx = NULL; /* avoid releasing the f_ctx in the end */
} else {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (libraryJoin(curr_functions_lib_ctx, functions_lib_ctx, restore_replicy == restorePolicy_Replace, &err) != C_OK) {
goto load_error;
}
}
/* Indicate that the command changed the data so it will be replicated and
* counted as a data change (for persistence configuration) */
server.dirty++;
load_error:
if (err) {
addReplyErrorSds(c, err);
} else {
addReply(c, shared.ok);
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (functions_lib_ctx) {
functionsLibCtxFree(functions_lib_ctx);
}
}
/* FUNCTION FLUSH [ASYNC | SYNC] */
void functionFlushCommand(client *c) {
if (c->argc > 3) {
addReplySubcommandSyntaxError(c);
return;
}
int async = 0;
if (c->argc == 3 && !strcasecmp(c->argv[2]->ptr,"sync")) {
async = 0;
} else if (c->argc == 3 && !strcasecmp(c->argv[2]->ptr,"async")) {
async = 1;
} else if (c->argc == 2) {
async = server.lazyfree_lazy_user_flush ? 1 : 0;
} else {
addReplyError(c,"FUNCTION FLUSH only supports SYNC|ASYNC option");
return;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
functionsLibCtxClearCurrent(async);
Change FUNCTION CREATE, DELETE and FLUSH to be WRITE commands instead of MAY_REPLICATE. (#9953) The issue with MAY_REPLICATE is that all automatic mechanisms to handle write commands will not work. This require have a special treatment for: * Not allow those commands to be executed on RO replica. * Allow those commands to be executed on RO replica from primary connection. * Allow those commands to be executed on the RO replica from AOF. By setting those commands as WRITE commands we are getting all those properties from Redis. Test was added to verify that those properties work as expected. In addition, rearrange when and where functions are flushed. Before this PR functions were flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the assumptions that functions are data and need to be created/deleted alongside with the data. A side effect of this, for example, `debug reload noflush` did not flush the data but did flush the functions, `debug loadaof` flush the data but not the functions. This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not want to flush the functions (on all other cases, functions will be flushed). Used the new flag on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof` to verify that functions behave the same as the data. Notice that because now functions will be deleted along side with the data we can not allow `CLUSTER RESET` to be called from within a function (it will cause the function to be released while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET` so it will not be possible to be called from within a function. The other cluster commands are allowed from within a function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script. Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions. When loading functions, if this flag is set, we will replace old functions with new ones on collisions.
2021-12-21 16:13:29 +02:00
/* Indicate that the command changed the data so it will be replicated and
* counted as a data change (for persistence configuration) */
server.dirty++;
addReply(c,shared.ok);
}
/* FUNCTION HELP */
Auto-generate the command table from JSON files (#9656) Delete the hardcoded command table and replace it with an auto-generated table, based on a JSON file that describes the commands (each command must have a JSON file). These JSON files are the SSOT of everything there is to know about Redis commands, and it is reflected fully in COMMAND INFO. These JSON files are used to generate commands.c (using a python script), which is then committed to the repo and compiled. The purpose is: * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic. * drop the dependency between Redis-user and the commands.json in redis-doc. * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be done in a separate PR) * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release artifacts should be a large JSON, containing all the information about all of the commands, which will be generated from COMMAND's reply) * the byproduct of this is: * module commands will be able to provide that info and possibly be more of a first-class citizens * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info. ### Interface changes #### COMMAND INFO's reply change (and arg-less COMMAND) Before this commit the reply at index 7 contained the key-specs list and reply at index 8 contained the sub-commands list (Both unreleased). Now, reply at index 7 is a map of: - summary - short command description - since - debut version - group - command group - complexity - complexity string - doc-flags - flags used for documentation (e.g. "deprecated") - deprecated-since - if deprecated, from which version? - replaced-by - if deprecated, which command replaced it? - history - a list of (version, what-changed) tuples - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876 - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments) - key-specs - an array of keys specs (already in unstable, just changed location) - subcommands - a list of sub-commands (already in unstable, just changed location) - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845) more details on these can be found in https://github.com/redis/redis-doc/pull/1697 only the first three fields are mandatory #### API changes (unreleased API obviously) now they take RedisModuleCommand opaque pointer instead of looking up the command by name - RM_CreateSubcommand - RM_AddCommandKeySpec - RM_SetCommandKeySpecBeginSearchIndex - RM_SetCommandKeySpecBeginSearchKeyword - RM_SetCommandKeySpecFindKeysRange - RM_SetCommandKeySpecFindKeysKeynum Currently, we did not add module API to provide additional information about their commands because we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944. ### Somehow related changes 1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command will be documented with M|KM|FT|MI and can take both lowercase and uppercase ### Unrelated changes 1. Bugfix: no_madaory_keys was absent in COMMAND's reply 2. expose CMD_MODULE as "module" via COMMAND 3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags) Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 20:23:15 +01:00
void functionHelpCommand(client *c) {
const char *help[] = {
"LOAD [REPLACE] <FUNCTION CODE>",
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
" Create a new library with the given library name and code.",
"DELETE <LIBRARY NAME>",
" Delete the given library.",
"LIST [LIBRARYNAME PATTERN] [WITHCODE]",
" Return general information on all the libraries:",
" * Library name",
" * The engine used to run the Library",
" * Library description",
" * Functions list",
" * Library code (if WITHCODE is given)",
" It also possible to get only function that matches a pattern using LIBRARYNAME argument.",
"STATS",
" Return information about the current function running:",
" * Function name",
" * Command used to run the function",
" * Duration in MS that the function is running",
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
" If no function is running, return nil",
" In addition, returns a list of available engines.",
"KILL",
" Kill the current running function.",
"FLUSH [ASYNC|SYNC]",
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
" Delete all the libraries.",
" When called without the optional mode argument, the behavior is determined by the",
" lazyfree-lazy-user-flush configuration directive. Valid modes are:",
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
" * ASYNC: Asynchronously flush the libraries.",
" * SYNC: Synchronously flush the libraries.",
"DUMP",
" Return a serialized payload representing the current libraries, can be restored using FUNCTION RESTORE command",
"RESTORE <PAYLOAD> [FLUSH|APPEND|REPLACE]",
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
" Restore the libraries represented by the given payload, it is possible to give a restore policy to",
" control how to handle existing libraries (default APPEND):",
" * FLUSH: delete all existing libraries.",
" * APPEND: appends the restored libraries to the existing libraries. On collision, abort.",
" * REPLACE: appends the restored libraries to the existing libraries, On collision, replace the old",
" libraries with the new libraries (notice that even on this option there is a chance of failure",
" in case of functions name collision with another library).",
NULL };
addReplyHelp(c, help);
}
/* Verify that the function name is of the format: [a-zA-Z0-9_][a-zA-Z0-9_]? */
static int functionsVerifyName(sds name) {
if (sdslen(name) == 0) {
return C_ERR;
}
for (size_t i = 0 ; i < sdslen(name) ; ++i) {
char curr_char = name[i];
if ((curr_char >= 'a' && curr_char <= 'z') ||
(curr_char >= 'A' && curr_char <= 'Z') ||
(curr_char >= '0' && curr_char <= '9') ||
(curr_char == '_'))
{
continue;
}
return C_ERR;
}
return C_OK;
}
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
int functionExtractLibMetaData(sds payload, functionsLibMataData *md, sds *err) {
sds name = NULL;
sds desc = NULL;
sds engine = NULL;
sds code = NULL;
if (strncmp(payload, "#!", 2) != 0) {
*err = sdsnew("Missing library metadata");
return C_ERR;
}
char *shebang_end = strchr(payload, '\n');
if (shebang_end == NULL) {
*err = sdsnew("Invalid library metadata");
return C_ERR;
}
size_t shebang_len = shebang_end - payload;
sds shebang = sdsnewlen(payload, shebang_len);
int numparts;
sds *parts = sdssplitargs(shebang, &numparts);
sdsfree(shebang);
if (!parts || numparts == 0) {
*err = sdsnew("Invalid library metadata");
sdsfreesplitres(parts, numparts);
return C_ERR;
}
engine = sdsdup(parts[0]);
sdsrange(engine, 2, -1);
for (int i = 1 ; i < numparts ; ++i) {
sds part = parts[i];
if (strncasecmp(part, "name=", 5) == 0) {
if (name) {
*err = sdscatfmt(sdsempty(), "Invalid metadata value, name argument was given multiple times");
goto error;
}
name = sdsdup(part);
sdsrange(name, 5, -1);
continue;
}
*err = sdscatfmt(sdsempty(), "Invalid metadata value given: %s", part);
goto error;
}
if (!name) {
*err = sdsnew("Library name was not given");
goto error;
}
sdsfreesplitres(parts, numparts);
md->name = name;
md->code = sdsnewlen(shebang_end, sdslen(payload) - shebang_len);
md->engine = engine;
return C_OK;
error:
if (name) sdsfree(name);
if (desc) sdsfree(desc);
if (engine) sdsfree(engine);
if (code) sdsfree(code);
sdsfreesplitres(parts, numparts);
return C_ERR;
}
void functionFreeLibMetaData(functionsLibMataData *md) {
if (md->code) sdsfree(md->code);
if (md->name) sdsfree(md->name);
if (md->engine) sdsfree(md->engine);
}
/* Compile and save the given library, return the loaded library name on success
* and NULL on failure. In case on failure the err out param is set with relevant error message */
sds functionsCreateWithLibraryCtx(sds code, int replace, sds* err, functionsLibCtx *lib_ctx, size_t timeout) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
dictIterator *iter = NULL;
dictEntry *entry = NULL;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
functionLibInfo *new_li = NULL;
functionLibInfo *old_li = NULL;
functionsLibMataData md = {0};
if (functionExtractLibMetaData(code, &md, err) != C_OK) {
return NULL;
}
if (functionsVerifyName(md.name)) {
*err = sdsnew("Library names can only contain letters, numbers, or underscores(_) and must be at least one character long");
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
goto error;
}
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
engineInfo *ei = dictFetchValue(engines, md.engine);
if (!ei) {
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
*err = sdscatfmt(sdsempty(), "Engine '%S' not found", md.engine);
goto error;
}
engine *engine = ei->engine;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
old_li = dictFetchValue(lib_ctx->libraries, md.name);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (old_li && !replace) {
old_li = NULL;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
*err = sdscatfmt(sdsempty(), "Library '%S' already exists", md.name);
goto error;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (old_li) {
libraryUnlink(lib_ctx, old_li);
}
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
new_li = engineLibraryCreate(md.name, ei, code);
if (engine->create(engine->engine_ctx, new_li, md.code, timeout, err) != C_OK) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
goto error;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
if (dictSize(new_li->functions) == 0) {
*err = sdsnew("No functions registered");
goto error;
}
/* Verify no duplicate functions */
iter = dictGetIterator(new_li->functions);
while ((entry = dictNext(iter))) {
functionInfo *fi = dictGetVal(entry);
if (dictFetchValue(lib_ctx->functions, fi->name)) {
/* functions name collision, abort. */
*err = sdscatfmt(sdsempty(), "Function %s already exists", fi->name);
goto error;
}
}
dictReleaseIterator(iter);
iter = NULL;
libraryLink(lib_ctx, new_li);
if (old_li) {
engineLibraryFree(old_li);
}
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
sds loaded_lib_name = md.name;
md.name = NULL;
functionFreeLibMetaData(&md);
return loaded_lib_name;
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
error:
if (iter) dictReleaseIterator(iter);
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
if (new_li) engineLibraryFree(new_li);
if (old_li) libraryLink(lib_ctx, old_li);
functionFreeLibMetaData(&md);
return NULL;
}
/*
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
* FUNCTION LOAD [REPLACE] <LIBRARY CODE>
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
* REPLACE - optional, replace existing library
* LIBRARY CODE - library code to pass to the engine
*/
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
void functionLoadCommand(client *c) {
int replace = 0;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
int argc_pos = 2;
while (argc_pos < c->argc - 1) {
robj *next_arg = c->argv[argc_pos++];
if (!strcasecmp(next_arg->ptr, "replace")) {
replace = 1;
continue;
}
addReplyErrorFormat(c, "Unknown option given: %s", (char*)next_arg->ptr);
return;
}
if (argc_pos >= c->argc) {
addReplyError(c, "Function code is missing");
return;
}
robj *code = c->argv[argc_pos];
sds err = NULL;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
sds library_name = NULL;
size_t timeout = LOAD_TIMEOUT_MS;
if (mustObeyClient(c)) {
timeout = 0;
}
if (!(library_name = functionsCreateWithLibraryCtx(code->ptr, replace, &err, curr_functions_lib_ctx, timeout)))
{
addReplyErrorSds(c, err);
return;
}
/* Indicate that the command changed the data so it will be replicated and
* counted as a data change (for persistence configuration) */
server.dirty++;
Functions: Move library meta data to be part of the library payload. (#10500) ## Move library meta data to be part of the library payload. Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.** The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example: ```lua #!lua name=test redis.register_function('foo', function() return 1 end) ``` The above script will run on the Lua engine and will create a library called `test`. ## API Changes (compare to 7.0 rc2) * `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`. * The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST` ## Breaking Changes (compare to 7.0 rc2) * Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line). * Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid. ## Notes * Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
2022-04-05 10:27:24 +03:00
addReplyBulkSds(c, library_name);
}
/* Return memory usage of all the engines combine */
unsigned long functionsMemory(void) {
dictIterator *iter = dictGetIterator(engines);
dictEntry *entry = NULL;
size_t engines_nemory = 0;
while ((entry = dictNext(iter))) {
engineInfo *ei = dictGetVal(entry);
engine *engine = ei->engine;
engines_nemory += engine->get_used_memory(engine->engine_ctx);
}
dictReleaseIterator(iter);
return engines_nemory;
}
/* Return memory overhead of all the engines combine */
unsigned long functionsMemoryOverhead(void) {
size_t memory_overhead = dictMemUsage(engines);
memory_overhead += dictMemUsage(curr_functions_lib_ctx->functions);
memory_overhead += sizeof(functionsLibCtx);
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
memory_overhead += curr_functions_lib_ctx->cache_memory;
memory_overhead += engine_cache_memory;
return memory_overhead;
}
/* Returns the number of functions */
unsigned long functionsNum(void) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return dictSize(curr_functions_lib_ctx->functions);
}
unsigned long functionsLibNum(void) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return dictSize(curr_functions_lib_ctx->libraries);
}
dict* functionsLibGet(void) {
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
return curr_functions_lib_ctx->libraries;
}
Redis Function Libraries (#10004) # Redis Function Libraries This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906. Libraries purpose is to provide a better code sharing between functions by allowing to create multiple functions in a single command. Functions that were created together can safely share code between each other without worrying about compatibility issues and versioning. Creating a new library is done using 'FUNCTION LOAD' command (full API is described below) This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library: * name - name of the library * engine - engine used to create the library * code - library code * description - library description * functions - the functions exposed by the library When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo. Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo. As a result, the engine will create one or more functions by calling 'libraryCreateFunction'. The new funcion will be added to the newly created libraryInfo. So far Everything is happening locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply freeing the libraryInfo. After the library info is fully constructed we start the joining phase by which we will join the new library to the other libraries currently exist on Redis. The joining phase make sure there is no function collision and add the library to the librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact same way as functionCtx was used (with respect to RDB loading, replicatio, ...). The only difference is that apart from function dictionary (maps function name to functionInfo object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object. ## New API ### FUNCTION LOAD `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>` Create a new library with the given parameters: * ENGINE - REPLACE Engine name to use to create the library. * LIBRARY NAME - The new library name. * REPLACE - If the library already exists, replace it. * DESCRIPTION - Library description. * CODE - Library code. Return "OK" on success, or error on the following cases: * Library name already taken and REPLACE was not used * Name collision with another existing library (even if replace was uses) * Library registration failed by the engine (usually compilation error) ## Changed API ### FUNCTION LIST `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]` Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries. ### INFO MEMORY Added number of libraries to `INFO MEMORY` ### Commands flags `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands as commands that add new data to the dateset (functions are data) and so we want to disallows to run those commands on OOM. ## Removed API * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906 * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899 ## Lua engine changes When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call this run the loading run. Loading run is not a usual script run, it is not possible to invoke any Redis command from within the load run. Instead there is a new API provided by `library` object. The new API's: * `redis.log` - behave the same as `redis.log` * `redis.register_function` - register a new function to the library The loading run purpose is to register functions using the new `redis.register_function` API. Any attempt to use any other API will result in an error. In addition, the load run is has a time limit of 500ms, error is raise on timeout and the entire operation is aborted. ### `redis.register_function` `redis.register_function(<function_name>, <callback>, [<description>])` This new API allows users to register a new function that will be linked to the newly created library. This API can only be called during the load run (see definition above). Any attempt to use it outside of the load run will result in an error. The parameters pass to the API are: * function_name - Function name (must be a Lua string) * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro * description - Function description, optional (must be a Lua string). ### Example The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively: ``` local function f1(keys, args)     return 1 end local function f2(keys, args)     return 2 end redis.register_function('f1', f1) redis.register_function('f2', f2) ``` Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the functions and not as global. ### Technical Details On the load run we only want the user to be able to call a white list on API's. This way, in the future, if new API's will be added, the new API's will not be available to the load run unless specifically added to this white list. We put the while list on the `library` object and make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set the `globals` of a function (and all the function it creates). Before starting the load run we create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure to set global protection on this table just like the general global protection already exists today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) to set `g` as the global table of the load run. After the load run finished we update `g` metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals), we also pop out the `library` object as we do not need it anymore. This way, any function that was created on the load run (and will be invoke using `fcall`) will see the default globals as it expected to see them and will not have the `library` API anymore. An important outcome of this new approach is that now we can achieve a distinct global table for each library (it is not yet like that but it is very easy to achieve it now). In the future we can decide to remove global protection because global on different libraries will not collide or we can chose to give different API to different libraries base on some configuration or input. Notice that this technique was meant to prevent errors and was not meant to prevent malicious user from exploit it. For example, the load run can still save the `library` object on some local variable and then using in `fcall` context. To prevent such a malicious use, the C code also make sure it is running in the right context and if not raise an error.
2022-01-06 13:39:38 +02:00
size_t functionsLibCtxfunctionsLen(functionsLibCtx *functions_ctx) {
return dictSize(functions_ctx->functions);
}
/* Initialize engine data structures.
* Should be called once on server initialization */
int functionsInit(void) {
engines = dictCreate(&engineDictType);
if (luaEngineInitEngine() != C_OK) {
return C_ERR;
}
/* Must be initialized after engines initialization */
curr_functions_lib_ctx = functionsLibCtxCreate();
return C_OK;
}