futriix/tests/backpressure_test.lua

-- tests/backpressure_test.lua
-- Тестирование механизма backpressure при перегрузке

local function setup_backpressure_test()
    print("=== Setup Backpressure Test ===")
    
    db.execute("CREATE DATABASE IF NOT EXISTS backpressure_test")
    db.execute("USE backpressure_test")
    
    db.execute([[
        CREATE COLLECTION IF NOT EXISTS test_collection
        WITH SETTINGS {
            max_documents = 10000000
        }
    ]])
    
    -- Включаем backpressure с агрессивными настройками для теста
    db.execute([[
        SET BACKPRESSURE CONFIG {
            enabled = true,
            cpu_threshold = 0.50,
            memory_threshold = 0.60,
            queue_size_threshold = 100,
            connection_threshold = 50,
            low_delay_ms = 50,
            medium_reject_prob = 30,
            high_reject_prob = 70
        }
    ]])
    
    return true
end

local function test_backpressure_level_none()
    print("\n=== Test 1: Backpressure Level NONE ===")
    
    -- При нормальной нагрузке
    local start_time = os.clock()
    local success_count = 0
    local reject_count = 0
    
    for i = 1, 100 do
        local success, err = pcall(function()
            return db.execute(string.format([[
                INSERT INTO test_collection VALUES {
                    _id = "doc_%d",
                    value = %d,
                    timestamp = %d
                }
            ]], i, i, os.time() * 1000))
        end)
        
        if success then
            success_count = success_count + 1
        else
            reject_count = reject_count + 1
            if string.find(err, "backpressure") then
                print("Unexpected rejection: " .. err)
            end
        end
    end
    
    local duration = os.clock() - start_time
    
    print(string.format("Success: %d, Rejected: %d, Duration: %.3fs", 
        success_count, reject_count, duration))
    
    if reject_count == 0 then
        print("✅ No rejections under normal load")
        return true
    else
        print("❌ Unexpected rejections: " .. reject_count)
        return false
    end
end

local function simulate_backpressure_condition()
    print("Simulating high load condition...")
    
    -- Симулируем высокую нагрузку
    local threads = {}
    for i = 1, 100 do
        table.insert(threads, coroutine.create(function()
            for j = 1, 100 do
                local success = pcall(function()
                    db.execute(string.format([[
                        SELECT * FROM test_collection WHERE value > %d
                    ]], math.random(1, 50)))
                end)
                if not success then
                    coroutine.yield(false)
                end
                db.sleep(0.001)
            end
            coroutine.yield(true)
        end))
    end
    
    -- Запускаем все потоки
    for _, thread in ipairs(threads) do
        coroutine.resume(thread)
    end
    
    -- Ждём, пока сработает backpressure
    db.sleep(5)
    
    return true
end

local function test_backpressure_level_medium()
    print("\n=== Test 2: Backpressure Level MEDIUM ===")
    
    simulate_backpressure_condition()
    
    local status = db.execute("SHOW BACKPRESSURE STATUS")
    local bp_status = db.json_decode(status)
    
    print(string.format("Current backpressure level: %s", bp_status.current_level))
    print(string.format("Write allowed: %s", tostring(bp_status.write_allowed)))
    print(string.format("Read allowed: %s", tostring(bp_status.read_allowed)))
    print(string.format("Reject probability: %d%%", bp_status.reject_probability or 0))
    
    -- Тестируем процент отказов
    local total_requests = 500
    local rejected = 0
    
    for i = 1, total_requests do
        local success, err = pcall(function()
            return db.execute("INSERT INTO test_collection VALUES {_id = 'test_" .. i .. "', value = " .. i .. "}")
        end)
        
        if not success and string.find(err or "", "rejected") then
            rejected = rejected + 1
        end
    end
    
    local reject_rate = (rejected / total_requests) * 100
    print(string.format("Actual reject rate: %.1f%% (expected: ~%d%%)", 
        reject_rate, bp_status.reject_probability or 30))
    
    -- Проверяем, что reject_rate в разумных пределах
    local expected_reject = bp_status.reject_probability or 30
    if math.abs(reject_rate - expected_reject) < 20 then
        print("✅ Rejection rate within acceptable range")
        return true
    else
        print("❌ Rejection rate outside expected range")
        return false
    end
end

local function test_backpressure_with_delay()
    print("\n=== Test 3: Backpressure with Delay ===")
    
    -- Замеряем время выполнения при backpressure
    local start_time = os.clock()
    local delayed_requests = 0
    
    for i = 1, 50 do
        local req_start = os.clock()
        db.execute("SELECT * FROM test_collection LIMIT 10")
        local req_end = os.clock()
        
        if req_end - req_start > 0.05 then -- больше 50ms задержки
            delayed_requests = delayed_requests + 1
        end
    end
    
    local total_duration = os.clock() - start_time
    local avg_delay = total_duration / 50 * 1000 -- в миллисекундах
    
    print(string.format("Avg request time: %.2f ms", avg_delay))
    print(string.format("Requests with >50ms delay: %d/%d", delayed_requests, 50))
    
    if avg_delay > 40 then
        print("✅ Backpressure delays detected as expected")
        return true
    else
        print("⚠️ Lower than expected delays")
        return false
    end
end

local function test_backpressure_recovery()
    print("\n=== Test 4: Backpressure Recovery ===")
    
    -- Даём системе восстановиться
    print("Waiting for system recovery...")
    db.sleep(30)
    
    local status = db.execute("SHOW BACKPRESSURE STATUS")
    local bp_status = db.json_decode(status)
    
    print(string.format("Recovered backpressure level: %s", bp_status.current_level))
    
    -- Проверяем, что запросы снова проходят
    local success_count = 0
    for i = 1, 100 do
        local success = pcall(function()
            return db.execute("INSERT INTO test_collection VALUES {_id = 'recovery_" .. i .. "', value = " .. i .. "}")
        end)
        if success then success_count = success_count + 1 end
    end
    
    print(string.format("Successful writes after recovery: %d/100", success_count))
    
    if success_count > 95 then
        print("✅ System recovered successfully")
        return true
    else
        print("❌ Recovery incomplete: " .. success_count .. " successes")
        return false
    end
end

local function test_backpressure_metrics()
    print("\n=== Test 5: Backpressure Metrics ===")
    
    local metrics = db.execute("SHOW BACKPRESSURE METRICS")
    local metrics_data = db.json_decode(metrics)
    
    print("Backpressure metrics:")
    for key, value in pairs(metrics_data) do
        print(string.format("  %s: %s", key, tostring(value)))
    end
    
    local required_fields = {
        "current_level", "write_allowed", "read_allowed",
        "rejected_count", "delayed_count", "cpu_threshold"
    }
    
    for _, field in ipairs(required_fields) do
        if metrics_data[field] == nil then
            print("❌ Missing metric: " .. field)
            return false
        end
    end
    
    print("✅ All required metrics present")
    return true
end

local function test_backpressure_burst_handling()
    print("\n=== Test 6: Burst Handling ===")
    
    -- Генерируем burst запросов
    local burst_size = 1000
    local start_time = os.clock()
    local results = {}
    
    -- Используем coroutines для параллельных запросов
    local handlers = {}
    for i = 1, burst_size do
        table.insert(handlers, coroutine.create(function()
            local success = pcall(function()
                return db.execute(string.format([[
                    INSERT INTO test_collection VALUES {
                        _id = "burst_%d_%d",
                        value = %d,
                        timestamp = %d
                    }
                ]], os.time(), i, i, os.time() * 1000)
            end)
            coroutine.yield(success)
        end))
    end
    
    -- Запускаем все handlers
    for _, handler in ipairs(handlers) do
        coroutine.resume(handler)
    end
    
    -- Собираем результаты
    local success_count = 0
    for _, handler in ipairs(handlers) do
        local success = coroutine.resume(handler)
        if success then
            local result = coroutine.status(handler) == "dead" and true or false
            if result then success_count = success_count + 1 end
        end
    end
    
    local duration = os.clock() - start_time
    local qps = burst_size / duration
    
    print(string.format("Burst: %d requests in %.2fs (%.0f QPS)", 
        burst_size, duration, qps))
    print(string.format("Successful: %d, Failed: %d", 
        success_count, burst_size - success_count))
    
    if qps > 100 then
        print("✅ Backpressure handling burst correctly")
        return true
    else
        print("⚠️ Lower than expected QPS")
        return false
    end
end

local function cleanup_backpressure()
    print("\n=== Cleanup ===")
    db.execute("DROP DATABASE IF EXISTS backpressure_test")
    -- Сбрасываем backpressure настройки
    db.execute("SET BACKPRESSURE CONFIG DEFAULT")
    print("Cleanup completed")
end

local function run_all_backpressure_tests()
    print("╔══════════════════════════════════════════════════════════════╗")
    print("║     BACKPRESSURE TESTS SUITE                                  ║")
    print("╚══════════════════════════════════════════════════════════════╝")
    
    setup_backpressure_test()
    
    local results = {
        test_backpressure_level_none(),
        test_backpressure_level_medium(),
        test_backpressure_with_delay(),
        test_backpressure_recovery(),
        test_backpressure_metrics(),
        test_backpressure_burst_handling()
    }
    
    print("\n╔══════════════════════════════════════════════════════════════╗")
    print("║                     TEST RESULTS                              ║")
    print("╚══════════════════════════════════════════════════════════════╝")
    
    local passed = 0
    for i, result in ipairs(results) do
        local status = result and "✅ PASSED" or "⚠️ SKIPPED/FAILED"
        print(string.format("Test %d: %s", i, status))
        if result then passed = passed + 1 end
    end
    
    print(string.format("\nTotal: %d/%d tests passed", passed, #results))
    
    cleanup_backpressure()
    
    return passed == #results
end

return run_all_backpressure_tests()